PubMed Health⌕ Search

Biomedical subjects

Sergei V Strelkov

Publications and source records attributed to Sergei V Strelkov.

13 recordsLinked to original sources
PubMed2006

Monitoring intermediate filament assembly by small-angle x-ray scattering reveals the molecular architecture of assembly intermediates.

Intermediate filaments (IFs), along with microtubules, microfilaments, and associated cross-bridging proteins, constitute the cytoskeleton of metazoan cells. While crystallographic data on the dimer representing the elementary IF "building block" have recently become available, little structural detail is known about both the mature IF architecture and its assembly pathway. Here, we have applied solution small-angle x-ray scattering to investigate the in vitro assembly of a 53-kDa human IF protein vimentin at pH 8.4 by systematically varying the ionic strength conditions, and complemented these experiments by electron microscopy and analytical ultracentrifugation. While a vimentin solution in 5 mM Tris.HCl (pH 8.4) contains predominantly tetramers, addition of 20 mM NaCl induces further lateral assembly evidenced by the shift of the sedimentation coefficient and yields a distinct octameric intermediate. Four octamers eventually associate into unit-length filaments (ULFs) that anneal longitudinally. Based on the small-angle x-ray scattering experiments supplemented by crystallographic data and additional structural constraints, 3D molecular models of the vimentin tetramer, octamer, and ULF were constructed. Within each of the three oligomers, the adjacent dimers are aligned exclusively in an approximately half-staggered antiparallel A(11) mode with a distance of 3.2-3.4 nm between their axes. The ULF appears to be a dynamic and a relatively loosely packed structure with a roughly even mass distribution over its cross-section.

Humans↗
PubMed2006

Restrictive cardiomyopathy with atrioventricular conduction block resulting from a desmin mutation.

BACKGROUND: According to the predominant view, desmin mutations cause dilated cardiomyopathy (DCM). We evaluated a family with restrictive cardiomyopathy (RCM) associated with a novel desmin mutation and reviewed recent reports regarding the frequency of RCM in patients with desmin myopathy. METHODS: Cardiovascular examination was performed in three affected and five at-risk members of a family from Poland, histopathologic study of skeletal muscle biopsy was done in a single patient, and functional analysis of mutant desmin protein was carried out in cultured cells. RESULTS: Cardiovascular assessment led to the diagnosis of RCM in affected family members. Histopathological study of skeletal muscle biopsy revealed features characteristic of desmin myopathy. A novel desmin E413K mutation was identified in each affected family member, but not unrelated controls. The pathogenicity of the E413K mutation was confirmed in transfected cell cultures showing inability of mutant desmin to form a cellular filamentous network or support a pre-existing network formed by other intermediate filaments. Three-dimensional modeling and electrostatic calculations indicated that the E413K mutation located in a functionally unique domain of desmin molecule potentially disrupts intramolecular interactions. Analysis of previously reported observations indicates that RCM in desminopathy patients may be as frequent as DCM. CONCLUSIONS: A novel E413K mutation in desmin caused autosomal dominant RCM rather than DCM. The location of the E413K mutation at a highly conserved end of the alpha-helical rod domain may be related to the phenotypic differences from the previously described DCM-associated desmin mutations. Functional and structural analyses of mutant desmin allowed to identify likely pathogenic mechanisms.

Adult↗
PubMed2006

Structure, stability, and biological activity of bacteriophage T4 gene product 9 probed with mutagenesis and monoclonal antibodies.

Gene product (gp) 9 connects the long tail fibers and triggers the structural transition of T4 phage baseplate at the beginning of infection process. Gp9 is a parallel homotrimer with 288 amino acid residues per chain that forms three domains. To investigate the role of the gp9 amino terminus, we have engineered a set of mutants with deletions and random substitutions in this part. The structure of the mutants was probed using monoclonal antibodies that bind to either N-terminal, middle, or C-terminal domains. Deletions of up to 12 N-terminal residues as well as random substitutions of the second, third and fourth residues yielded trimers that failed to incorporate in vitro into the T4 9(-)-particles and were not able to convert them into infectious virions. As detected using monoclonal antibodies, these mutants undergo structural changes in both N-terminal and middle domains. Furthermore, deletion of the first twenty residues caused profound structural changes in all three gp9 domains. In addition, N-terminally truncated proteins and randomized mutants formed SDS-resistant "conformers" due to unwinding of the N-terminal region. Co-expression of the full-length gp9 and the mutant lacking first 20 residues clearly shows the assembly of heterotrimers, suggesting that the gp9 trimerization in vivo occurs post-translationally. Collectively, our data indicate that the aminoterminal sequence of gp9 is important to maintain a competent structure capable of incorporating into the baseplate, and may be also required at intermediate stages of gp9 folding and assembly.

Amino Acid Sequence↗
PubMed2004

The VASP tetramerization domain is a right-handed coiled coil based on a 15-residue repeat.

The vasodilator-stimulated phosphoprotein (VASP) is a key regulator of actin dynamics. We have determined the 1.3-A resolution crystal structure of the 45-residue-long tetramerization domain (TD) from human VASP. This domain forms a right-handed alpha-helical coiled-coil structure with a similar degree of supercoiling as found in the widespread left-handed coiled coils with heptad repeats. The basis for the right-handed geometry of VASP TD is a 15-residue repeat in its amino acid sequence, which reveals a characteristic pattern of hydrophobic residues. Hydrophobic interactions and a network of salt bridges render VASP TD highly thermostable with a melting point of 120 degrees C.

Actins↗
PubMed2004

Crystal structure of the human lamin A coil 2B dimer: implications for the head-to-tail association of nuclear lamins.

Nuclear intermediate filaments (IFs) are made from fibrous proteins termed lamins that assemble, in association with several transmembrane proteins of the inner nuclear membrane and an unknown number of chromatin proteins, into a filamentous scaffold called the nuclear lamina. In man, three types of lamins with significant sequence identity, i.e. lamin A/C, lamin B1 and B2, are expressed. The molecular characteristics of the filaments they form and the details of the assembly mechanism are still largely unknown. Here we report the crystal structure of the coiled-coil dimer from the second half of coil 2 from human lamin A at 2.2A resolution. Comparison to the recently solved structure of the homologous segment of human vimentin reveals a similar overall structure but a different distribution of charged residues and a different pattern of intra- and interhelical salt bridges. These features may explain, at least in part, the differences observed between the lamin and vimentin assembly pathways. Employing a modeled lamin A coil 1A dimer, we propose that the head-to-tail association of two lamin dimers involves strong electrostatic attractions of distinct clusters of negative charge located on the opposite ends of the rod domain with arginine clusters in the head domain and the first segment of the tail domain. Moreover, lamin A mutations, including several in coil 2B, have been associated with human laminopathies. Based on our data most of these mutations are unlikely to alter the structure of the dimer but may affect essential molecular interactions occurring in later stages of filament assembly and lamina formation.

Amino Acid Sequence↗
PubMed2004

Design and crystal structure of bacteriophage T4 mini-fibritin NCCF.

Fibritin is a fibrous protein that forms "whiskers" attached to the neck of bacteriophage T4. Whiskers interact with the long tail fibers regulating the assembly and infectivity of the virus. The fibritin trimer includes the N-terminal domain responsible for attachment to the phage particle and for the collar formation, the central domain forming a 500 A long segmented coiled-coil structure, and the C-terminal "foldon" domain. We have designed a "mini" fibritin with most of the coiled-coil domain deleted, and solved its crystal structure. The non-helical N-terminal part represents a new protein fold that tightly interacts with the coiled-coil segment forming a single domain, as revealed by calorimetry. The analysis of the crystal structure and earlier electron microscopy data on the collar-whisker complex suggests the necessity of other proteins to participate in the collar formation. Crystal structure determination of the N-terminal domain of fibritin is the first step towards elucidating the detailed structure and assembly mechanism of the collar-whisker complex.

Amino Acid Motifs↗
PubMed2004

The biology of desmin filaments: how do mutations affect their structure, assembly, and organisation?

Desmin, the major intermediate filament (IF) protein of muscle, is evolutionarily highly conserved from shark to man. Recently, an increasing number of mutations of the desmin gene has been described to be associated with human diseases such as certain skeletal and cardiac myopathies. These diseases are histologically characterised by intracellular aggregates containing desmin and various associated proteins. Although there is progress regarding our knowledge on the cellular function of desmin within the cytoskeleton, the impact of each distinct mutation is currently not understood at all. In order to get insight into how such mutations affect filament assembly and their integration into the cytoskeleton we need to establish IF structure at atomic detail. Recent progress in determining the dimer structure of the desmin-related IF-protein vimentin allows us to assess how such mutations may affect desmin filament architecture.

Amino Acid Sequence↗
PubMed2003

Small deletions disturb desmin architecture leading to breakdown of muscle cells and development of skeletal or cardioskeletal myopathy.

Desmin ( DES) mutations have been recognized as a cause of desmin-related myopathy (OMIM 601419), or desminopathy, a disease characterized by progressive limb muscle weakness and accumulation of desmin-reactive granular aggregates in the myofibers. We have studied three families with skeletal or cardioskeletal myopathy caused by small in-frame deletions in the desmin gene. The newly identified in-frame deletions E359_S361del and N366del alter the heptad periodicity within a critical 2B coiled-coil segment. Structural analysis reveals that the E359_S361 deletion introduces a second stutter immediately downstream of the naturally occurring stutter, thus doubling the extent of the local coiled-coil unwinding. The N366del mutation converts the wild-type stutter into a different type of discontinuity, a stammer. A stammer, as opposed to a stutter, is expected to cause an extra overwinding of the coiled-coil. These mutations alter the coiled-coil geometry in specific ways leading to fatal damage to desmin filament assembly. Expression studies in two cell lines confirm the inability of desmin molecules with this changed architecture to polymerize into a functional filamentous network. This study provides insights into molecular pathogenetic mechanisms of desmin mutation-associated skeletal and cardioskeletal myopathy.

Adult↗
PubMed2003

Molecular architecture of intermediate filaments.

Together with microtubules and actin microfilaments, approximately 11 nm wide intermediate filaments (IFs) constitute the integrated, dynamic filament network present in the cytoplasm of metazoan cells. This network is critically involved in division, motility and other cellular processes. While the structures of microtubules and microfilaments are known in atomic detail, IF architecture is presently much less understood. The elementary 'building block' of IFs is a highly elongated, rod-like dimer based on an alpha-helical coiled-coil structure. Assembly of cytoplasmic IF proteins, such as vimentin, begins with a lateral association of dimers into tetramers and gradually into the so-called unit-length filaments (ULFs). Subsequently ULFs start to anneal longitudinally, ultimately yielding mature IFs after a compaction step. For nuclear lamins, however, assembly starts with a head-to-tail association of dimers. Recently, X-ray crystallographic data were obtained for several fragments of the vimentin dimer. Based on the dimer structure, molecular models of the tetramer and the entire filament are now a possibility.

Amino Acid Sequence↗
PubMed2002

Conserved segments 1A and 2B of the intermediate filament dimer: their atomic structures and role in filament assembly.

Intermediate filaments (IFs) are key components of the cytoskeleton in higher eukaryotic cells. The elementary IF 'building block' is an elongated coiled-coil dimer consisting of four consecutive alpha-helical segments. The segments 1A and 2B include highly conserved sequences and are critically involved in IF assembly. Based on the crystal structures of three human vimentin fragments at 1.4-2.3 A resolution (PDB entries 1gk4, 1gk6 and 1gk7), we have established the molecular organization of these two segments. The fragment corresponding to segment 1A forms a single, amphipatic alpha-helix, which is compatible with a coiled-coil geometry. While this segment might yield a coiled coil within an isolated dimer, monomeric 1A helices are likely to play a role in specific dimer-dimer interactions during IF assembly. The 2B segment reveals a double-stranded coiled coil, which unwinds near residue Phe351 to accommodate a 'stutter'. A fragment containing the last seven heptads of 2B interferes heavily with IF assembly and also transforms mature vimentin filaments into a new kind of structure. These results provide the first insight into the architecture and functioning of IFs at the atomic level.

Amino Acid Sequence↗
PubMedDate not supplied

Sequence comparisons of intermediate filament chains: evidence of a unique functional/structural role for coiled-coil segment 1A and linker L1.

A comprehensive analysis of the sequences of all types of intermediate filament chains has been undertaken with a particular emphasis on those of segment 1A and linker L1. This has been done to assess whether structural characteristics can be recognized in the sequences that would be consistent with the role of each region in the recently proposed "swinging head" hypothesis. The analyses show that linker L1 is the most flexible rod domain region, that it is the most elongated structure (on a per residue basis), and that it is the most variable region as regards sequence and length. Segment 1A has one of the two most highly conserved regions of sequence in the rod domain (the other being at the end of segment 2B), with seven particular residues conserved across all chain types. It also contains one of the very few potential interchain ionic interactions that could be conserved across all chain types. However, the aggregation of chains in segment 1A is specified less precisely overall by interchain ionic interactions than are the other coiled-coil segments. The apolar residue contents in positions a and d of the heptad substructure are the highest of any coiled-coil segment in the intermediate filament family. Segment 1A also displays an amino acid composition atypical of not only coiled-coil segments 1B and 2B, but indeed of two-stranded coiled coils in general. Nonetheless, molecular modeling based on the crystal structure of the monomeric 1A fragment from human vimentin shows that coiled-coil formation is plausible. The most extensive regions of apolar/aromatic residues lie at the C-terminal end of segment 2B in the helix termination motif and in segment 1A in and close to the helix initiation motif. The predicted stability of the individual alpha-helices in segment 1A is greater than in those comprising segments 1B and 2B, though potential intrachain ionic interactions are either lacking or are minimal in number. Analysis of the 1A sequence and those regions immediately N- and C-terminal to it has shown that the capping residues are near optimal close to the previously predicted ends, thus adding to the likely stability of the alpha-helical structure. However, a second terminating sequence is predicted in 1A (about 10 residues back from the C-terminus). This allows the possibility of some unwinding of the alpha-helical structure of 1A immediately adjacent to linker L1 when the head domains no longer stabilize the coiled-coil structure. All of these data are consistent with the concept of a flexible hinge at L1 and with the ability of the two alpha-helical coiled-coil strands to separate under appropriate conditions and partly unwind at their C-terminal ends to allow the head domains a greater degree of mobility, thus facilitating function.

Amino Acid Motifs↗
PubMedDate not supplied

Analysis of alpha-helical coiled coils with the program TWISTER reveals a structural mechanism for stutter compensation.

Alpha-helical coiled coils represent a widespread protein structure motif distinguished by a seven-residue periodicity of apolar residues in the primary sequence. A characteristic "knobs-into-holes" packing of these residues into a hydrophobic core results in a superhelical, usually left-handed, rope of two or more alpha-helices. Such a geometry can be parameterized. For this purpose, a new computer program, TWISTER, was developed. With the three-dimensional coordinates as input, TWISTER uses an original algorithm to determine the local coiled-coil parameters as a function of residue number. In addition, heptad positions are assigned based on structural criteria. It is known that frequently encountered discontinuities in the heptad repeat, such as stutters and skips, can be tolerated within a continuous coiled coil but result in a local distortion of its geometry. This was explored in detail with the help of TWISTER for several two- and three-stranded coiled coils. Depending on the particular protein, stutters were found to be compensated locally by an unwinding of the superhelix, alpha-helical unwinding, or both. In the first case, there is often a local switch from a left-handed to a right-handed superhelix. In general, the geometrical distortion is confined to about two alpha-helical turns at either side of the stutter. Furthermore, stutters result in a local increase of the coiled-coil radius.

Algorithms↗