Biomedical subjects

Sergey I Bozhevolnyi

Publications and source records attributed to Sergey I Bozhevolnyi.

11 recordsLinked to original sources

PubMed2006

Vectorial modeling of near-field imaging with uncoated fiber probes: transfer function and resolving power.

Using exact 3D vectorial simulations of radiation coupling into uncoated dielectric fiber probes, we calculate amplitude transfer functions for conical single-mode fiber tips at the light wavelength of 633 nm. The coupling efficiency of glass fiber tips is determined in a wide range of spatial frequencies of the incident radiation for opening angles varying from 30 degrees to 120 degrees . The resolution in near-field imaging with these tips is considered for field distributions limited in both direct and spatial-frequency space. The characteristics of the transfer functions describing the relation between probed optical fields and near-field images are analyzed in detail. The importance of utilizing a perfectly sharp tip is also examined.

Computer Simulation↗

PubMed2006

Channel plasmon-polaritons: modal shape, dispersion, and losses.

We theoretically study channel plasmon-polaritons (CPPs) with a geometry similar to that in recent experiments at telecommunication wavelengths [Bozhevolnyi et al., Nature 440, 508 (2006)]. The CPP modal shape, dispersion relation, and losses are simulated by using the multiple multipole method and the finite difference time domain technique. It is shown that, with an increase of the wavelength, the fundamental CPP mode shifts progressively toward the groove opening, ceasing to be guided at the groove bottom and becoming hybridized with wedge plasmon-polaritons running along the groove edges.

Journal Article↗

PubMed2006

Transfer function and near-field detection of evanescent waves.

We consider characterization of a near-field optical probe in terms of detection efficiency of different spatial frequencies associated with propagating and evanescent field components. The former are both detected with and radiated from an etched single-mode fiber tip, showing reciprocity of collection and illumination modes. Making use of a collection near-field microscope with a similar fiber tip illuminated by an evanescent field, we measure the collected power as a function of the field spatial frequency in different polarization configurations. Considering a two-dimensional probe configuration, numerical simulations of detection efficiency based on the eigenmode expansion technique are carried out for different tip apex angles. The detection roll-off for high spatial frequencies observed in the experiment and obtained during the simulations is fitted using a simple expression for the transfer function, which is derived by introducing an effective point of (dipolelike) detection inside the probe tip. It is found to be possible to fit reasonably well both the experimental and the simulation data for evanescent field components, implying that the developed approximation of the near-field transfer function can serve as a simple, rational, and sufficiently reliable means of fiber probe characterization.

Journal Article↗

PubMed2006

Laser-fabricated dielectric optical components for surface plasmon polaritons.

Fabrication of dielectric optical components for surface plasmon polaritons (SPPs) by two-photon polymerization (2PP) is studied. This direct-write femtosecond laser technology provides a low-cost and flexible method for the fabrication and investigation of plasmonic structures and optical components. Using the 2PP technique, we fabricated narrow dielectric ridges with dimensions as small as 150 nm on metal surfaces. SPP excitation with the laser-fabricated structures and guiding along them are demonstrated.

Journal Article↗

PubMed2006

Channel plasmon subwavelength waveguide components including interferometers and ring resonators.

Photonic components are superior to electronic ones in terms of operational bandwidth, but the diffraction limit of light poses a significant challenge to the miniaturization and high-density integration of optical circuits. The main approach to circumvent this problem is to exploit the hybrid nature of surface plasmon polaritons (SPPs), which are light waves coupled to free electron oscillations in a metal that can be laterally confined below the diffraction limit using subwavelength metal structures. However, the simultaneous realization of strong confinement and a propagation loss sufficiently low for practical applications has long been out of reach. Channel SPP modes--channel plasmon polaritons (CPPs)--are electromagnetic waves that are bound to and propagate along the bottom of V-shaped grooves milled in a metal film. They are expected to exhibit useful subwavelength confinement, relatively low propagation loss, single-mode operation and efficient transmission around sharp bends. Our previous experiments showed that CPPs do exist and that they propagate over tens of micrometres along straight subwavelength grooves. Here we report the design, fabrication and characterization of CPP-based subwavelength waveguide components operating at telecom wavelengths: Y-splitters, Mach-Zehnder interferometers and waveguide-ring resonators. We demonstrate that CPP guides can indeed be used for large-angle bending and splitting of radiation, thereby enabling the realization of ultracompact plasmonic components and paving the way for a new class of integrated optical circuits.

Journal Article↗

PubMed2006

Topography characterization of a deep grating using near-field imaging.

Using near-field optical microscopy at the wavelength of 633 nm, we image light intensity distributions at several distances above an approximately 2-microm-deep and a 1-microm-period glass grating illuminated from below under the condition of total internal reflection. The intensity distributions are numerically modeled, and an inversion procedure based on a least-squares-fit optimization is employed to extract the grating geometry from the optical images.

Journal Article↗

PubMed2005

Channel plasmon-polariton guiding by subwavelength metal grooves.

We report on realization of channel plasmon-polariton (CPP) propagation along a subwavelength metal groove. Using imaging with a near-field microscope and end-fire coupling with a tapered fiber connected to a tunable laser at telecommunication wavelengths (1425-1620 nm), we demonstrate low-loss (propagation length approximately 100 microm) and well-confined (mode width approximately 1.1 microm) CPP guiding along a triangular 0.6 microm-wide and 1 microm-deep groove in gold. We develop a simple model based on the effective-index method that accounts for the main features of CPP guiding and provides a clear physical picture of this phenomenon.

Journal Article↗

PubMed2004

Computational lens for the near field.

A method is presented to reconstruct the structure of a scattering object from data acquired with a photon scanning tunneling microscope. The data may be understood to form a Gabor type near-field hologram and are obtained at a distance from the sample where the field is defocused and normally uninterpretable. Object structure is obtained by the solution of the inverse scattering problem within the accuracy of a perturbative, two-dimensional model of the object.

Journal Article↗

PubMed2004

Near-field characterization of planar photonic-crystal-waveguide structures.

Characterization of photonic-crystal-waveguide (PCW) structures at telecommunication wavelengths with a collection scanning near-field optical microscope (SNOM) is considered. The propagation of light in silicon-on-insulator PCWs, formed by removing a single row of holes in the triangular lattice and connecting to access ridge waveguides, is imaged with the SNOM. High-contrast and high-resolution SNOM images of PCW structures containing straight PCWs as well as 90 degrees gradual and 60 degrees sharp PCW bends are obtained in the wavelength range of 1520-1570 nm, allowing for the determination of PCW mode characteristics and bend loss. We relate optical-signal variations along straight PCWs to the interference between a quasi-homogeneous background field and Bloch harmonics of the PCW mode, and use spatial-frequency spectra of the intensity variations to determine the dispersion of the PCW mode propagation constant. The bend loss is evaluated using averaged signal cross-sections and taking into account the fact that the signal is proportional to the PCW mode amplitude. It is directly shown that the bend loss for 60 degrees bends is significantly decreased for smoothened bends having one or three holes moved from the inner side of the bend corner to the outer one. The possibilities and limitations of SNOM imaging for the characterization of PCW structures are discussed.

Journal Article↗

PubMed2003

Direct observation of localized second-harmonic enhancement in random metal nanostructures.

Second harmonic (SH) scanning optical microscopy in reflection is used to image the gold film surface covered with randomly placed scatterers. SH images obtained with a tightly focused tunable (750-830 nm) laser beam show small (approximately 0.7 microm) and very bright (approximately 10(3) times the background) spots, whose locations depend on the wavelength and polarization of light. Comparing SH and fundamental harmonic (FH) images, we conclude that the localized SH enhancement occurs due to the overlap of FH and SH eigenmodes. The probability density function of the SH signal is found to follow the power-law dependence.

Journal Article↗

PubMed2002

Localization and waveguiding of surface plasmon polaritons in random nanostructures.

We propose to use channels in strongly scattering nonabsorbing random media for guiding electromagnetic waves, and demonstrate this concept using near-field microscopy of surface plasmon polaritons (SPP's) propagating along the gold film surface covered with randomly located scatterers. In the wavelength range of 725-765 nm, we observe complete inhibition of the SPP propagation inside the random structures composed of approximately 50-nm-wide gold bumps and their clusters with the density of 50 microm(-2), as well as well-defined SPP guiding along corrugation-free 2- and 4-microm-wide channels.

Journal Article↗