Biomedical subjects

Sergio Pinzauti

Publications and source records attributed to Sergio Pinzauti.

9 recordsLinked to original sources

PubMed2007

Development of a CZE method for the determination of mizolastine and its impurities in pharmaceutical preparations using response surface methodology.

A fast and selective CZE method for the determination of mizolastine and related impurities is described. Response surface methodology was applied to study the influence of phosphate/triethanolamine (TEA) buffer concentration, heptakis(2,3,6-tri-O-methyl)-beta-CD (TMbetaCD) concentration, voltage and temperature. The optimum conditions were: 105 mM phosphate/TEA buffer (pH 3.0) containing 10 mM TMbetaCD, temperature 19 degrees C and voltage 30 kV. Validation of the method was performed in drug substance and drug product. Robustness was evaluated using a Plackett-Burman design, including pH among the considered factors. Applying the optimal conditions, the nine peaks were baseline separated in about 10 min. The method was applied to the quality control of mizolastine in controlled-release tablets.

Benzimidazoles↗

PubMed2006

Selection of background electrolyte for CZE analysis by a chemometric approach. Part II. Separation of a mixture of basic beta-blocker drugs.

In the first part of this study a chemometric approach to choose a suitable background electrolyte for CZE analysis was introduced. Two hundred and twenty-two possible electrolytes were previously characterized by means of the descriptors pH, conductivity, ionic strength and relative viscosity and the approach was applied to the separation of a mixture of acidic drugs. In this second part, another application concerning the analysis of basic drugs is presented. The test mixture was made of eight beta-blocker drugs. According to the basic nature of the analytes, the original data set was reduced to a new subset of 117 objects with pH less than or equal to 7, and after computing principal components the new set of objects was represented in a two-dimensional space. Ten objects to be tested in CZE, capable of covering homogeneously the principal component space, were selected by means of Kennard-Stone algorithm. The data set was further reduced around the BGEs which gave the best results, and a new set of electrolytes to be tested was selected. Using pH 4 citrate buffer, an electropherogram with baseline resolution was obtained in 10 min. A Doehlert design was run to further reduce analysis time, and applying the optimized conditions (voltage, 23 kV; temperature, 26 degrees C) the separation was obtained in about 7 min.

Adrenergic beta-Antagonists↗

PubMed2006

Selection of background electrolyte for CZE analysis by a chemometric approach. Part I. Separation of a mixture of acidic non-steroidal anti-inflammatory drugs.

This paper is the first part of the presentation of a chemometric approach for the rapid selection of a suitable background electrolyte (BGE) in CZE analysis of small drug molecules. The strategy is based on principal component analysis and experimental design. In this first section, the approach is applied to the analysis of a mixture of six arylpropionic anti-inflammatory drugs. Initially, 222 possible aqueous background electrolytes (objects) were characterized using as descriptors pH, conductivity, ionic strength and relative viscosity. In order to allow the dissociation of the acidic analytes, this original data set was reduced to 154 background electrolytes with pH values higher than or equal to 5. Principal component analysis made it possible to graphically represent the new set of objects, described by the four variables, in a two-dimensional space. Among these electrolytes, Kennard-Stone algorithm selected ten objects to be tested by CZE, covering homogeneously principal component space. CZE analyses were carried out with the selected electrolytes, and 0.1 M borax was identified as the most suitable one for the specified application. Finally, the characteristics of the analysis were finely tuned by means of a response surface study, which allowed the best conditions to be determined: borax concentration, 0.09 M; methanol, 6% (v/v); temperature, 24 degrees C, voltage, 20 kV. Applying these conditions, a baseline resolution among the six compounds was obtained in less than 10 min.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2006

Mixture design in the optimization of a microemulsion system for the electrokinetic chromatographic determination of ketorolac and its impurities: method development and validation.

Microemulsion EKC (MEEKC) was used for the determination of ketorolac and its three impurities. The microemulsion system was optimized, for the first time in the literature, using a multivariate strategy involving a mixture design. A 13-run experimental plan covering an experimental domain defined by the components aqueous phase (10 mM borate buffer pH 9.2), oil phase (n-heptane) and surfactant/cosurfactant (SDS/n-butanol) was carried out. Good results were obtained with all microemulsions tested considering as responses analysis time and resolution, and according to the desirability function the best microemulsion system was constituted by 90.0% 10 mM borate buffer, 2.0% n-heptane, 8.0% of SDS/n-butanol in 1:2 ratio. Finally, with the aim of reducing analysis time, a response surface study was carried out in the experimental domain defined by the process variables temperature and voltage and the best values were 17 degrees C and -17 kV, respectively. Applying the optimised conditions, a complete resolution among the analytes was obtained in about 3 min using the short-end injection method. The method was validated for both drug substances and drug product and was applied to the quality control of ketorolac in coated tablets. A comparison of MEEKC, MEKC and CEC for assaying ketorolac and its related substances has been made.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2005

Analysis of catechins in Theobroma cacao beans by cyclodextrin-modified micellar electrokinetic chromatography.

A micellar electrokinetic chromatography (MEKC) method was developed for the quantitation of polyphenols (+)-catechin and (-)-epicatechin (catechin monomers) and the methylxanthine theobromine in Theobroma cacao beans. Owing to the poor stability of catechin monomers in alkaline conditions, a 50 mM Britton-Robinson buffer at a pH 2.50 was preferred as the background electrolyte. Under these conditions, the addition of hydroxypropyl-beta-cyclodextrin (HP-beta-CD) at a concentration of 12 mM to the SDS micellar solution (90 mM), resulted in a cyclodextrin-modified micellar electrokinetic chromatography (CD-MEKC) endowed with two peculiar advantages compare to the conventional MEKC: (i) strong improvement of separation of the most important phytomarkers of T. cacao and (ii) enantioselectivity toward (+/-)-catechin. In particular, separation of methylxanthines (theobromine and caffeine), procyanidin dimers B1 and B2, and catechins (epicatechin and catechin) was obtained simultaneously to the enantioseparation of racemic catechin within 10min. The enantioselectivity of the method makes it suitable in evaluation of possible epimerisation at the C-2 position of epicatechin monomer potentially occurring during heat processing and storage of T. cacao beans. The extraction procedure of the phytomarkers from the beans was approached using ultrasonic bath under mild conditions optimized by a multivariate strategy. The method was validated for robustness, selectivity, sensitivity, linearity, range, accuracy and precision and it was applied to T. cacao beans from different countries; interestingly, the native enantiomer (+)-catechin was found in the beans whereas, for the first time we reported that in chocolate, predominantly (-)-catechin is present, probably yielded by epimerisation of (-)-epicatechin occurred during the manufacture of chocolate.

Cacao↗

PubMed2004

Analysis of ketorolac and its related impurities by capillary electrochromatography.

Capillary electrochromatography (CEC) was employed for the assay of ketorolac (KT) and its known related impurities [1-hydroxy analog of ketorolac (HK), 1-keto analog of ketorolac (KK), ketorolac decarboxylated (DK)] in both drug substance and coated tablets. Detection was made at 323 nm and flufenamic acid was selected as internal standard. The experiments were performed in a 100 microm i.d. capillary packed with RP-18 silica particles (33.0, 24.5, 23.0 cm total, effective and packed lengths, respectively). The composition of the mobile phase was optimised by changing pH of the buffer and acetonitrile (ACN) content and by addition of other organic modifiers (methanol, ethanol, isopropanol, n-propanol) in order to evaluate the effect of these factors on the method performance (efficiency, retention and resolution). The optimum mobile phase consisted of a mixture of 50 mM ammonium formate buffer pH 3.5-water-acetonitrile (10:20:70, v/v/v), while voltage and temperature were set at 30 kV and 20 degrees C, respectively. Applying these conditions, all peaks were baseline resolved and the analysis was performed in less than 9 min. Selectivity, repeatability of retention time and peak area, detection and quantitation limits, linearity and range, precision and accuracy were also investigated. R.S.D. and bias values obtained for all the analytes were below 5% and sensitivity was satisfactory, thus the method was deemed suitable for pharmaceutical quality control. Applying the method to coated tablets, a recovery of 98.5+/-0.8% and an R.S.D. of 0.5% were found.

Calibration↗

PubMed2004

Simultaneous liquid chromatographic analysis of catecholamines and 4-hydroxy-3-methoxyphenylethylene glycol in human plasma. Comparison of amperometric and coulometric detection.

The comparison of two HPLC methods, one with electrochemical detection and the other with coulometric detection, for the simultaneous analysis of catecholamines and 4-hydroxy-3-methoxyphenylethylene glycol (MHPG) in human plasma is presented. The careful pre-treatment of plasma samples is based on an innovative two-step procedure by means of solid-phase extraction (SPE) which uses one single hydrophilic-lipophilic balance cartridge. The extraction yield values found were higher than 85% for epinephrine, norepinephrine and MHPG, and higher than 70% for dopamine. The assays carried out on real plasma samples with the coulometric system gave good results in terms of sensitivity (limits of quantitation: 0.10-0.15 ng ml(-1) for catecholamines, 0.6 ng ml(-1) for MHPG) and selectivity, while interference was sometimes found when using the amperometric system. Precision was also satisfactory, with relative standard deviation values for intermediate precision always lower than 6%. The HPLC method with coulometric detection coupled to a novel SPE procedure is thus suitable for the simultaneous determination of catecholamines and MHPG in plasma of volunteers subjected to experimental stress.

Case-Control Studies↗

PubMed2002

Didanosine extended-release matrix tablets: optimization of formulation variables using statistical experimental design.

Statistical experimental design was applied to evaluate the influence of some process and formulation variables and possible interactions among such variables, on didanosine release from directly-compressed matrix tablets based on blends of two insoluble polymers, Eudragit RS-PM and Ethocel 100, with the final goal of drug release behavior optimization. The considered responses were the percent of drug released at three determined times, the dissolution efficiency at 6 h and the time to dissolve 10% of drug. Four independent variables were considered: tablet compression force, ratio between the polymers and their particle size, and drug content. The preliminary screening step, carried out by means of a 12-run asymmetric screening matrix according to a D-optimal design strategy, allowed evaluation of the effects of different levels of each variable. The drug content and the polymers ratio had the most important effect on drug release, which, moreover, was favored by greater polymers particle size; on the contrary the compression force did not have a significant effect. The Doehlert design was then applied for a response-surface study, in order to study in depth the effects of the most important variables. The desirability function was used to simultaneously optimize the five considered responses, each having a different target. This procedure allowed selection, in the studied experimental domain, of the best formulation conditions to optimize drug release rate. The experimental values obtained from the optimized formulation highly agreed with the predicted values. The results demonstrated the reliability of the model in the preparation of extended-release matrix tablets with predictable drug release profiles.

Anti-HIV Agents↗

PubMed2002

Determination of reboxetine, a recent antidepressant drug, in human plasma by means of two high-performance liquid chromatography methods.

Reboxetine is a new norepinephrine reuptake inhibitor (NRI) drug recently introduced in the therapy for depressed patients. It is effective in the treatment of severe depression and safer to use than traditional tricyclic antidepressants. In this paper an original high-performance liquid chromatography (HPLC) method with ultraviolet detection for the determination of reboxetine in human plasma is described. It uses a C8 reversed-phase column and a mobile phase composed of acetonitrile and aqueous tetramethylammonium perchlorate. For the analysis of plasma samples containing very low levels of reboxetine, another HPLC method with fluorimetric detection was developed (limit of quantitation, LOQ=11 ng ml(-1); limit of detection, LOD=4 ng ml(-1)). The fluorimetric method is based on precolumn derivatisation of reboxetine with 9-fluorenylmethyl chloroformate. An accurate sample pretreatment of human plasma samples has been implemented by means of solid-phase extraction (SPE) on Oasis HLB (hydrophilic-lipophilic balance) cartridges with very high extraction yields (>95%). Both methods were applied to the analysis of plasma samples from depressed patients undergoing therapy with reboxetine and gave satisfactory results in terms of precision (RSD<4.5%) and accuracy (mean recovery>94%).

Antidepressive Agents↗