PubMed Health⌕ Search

Biomedical subjects

Sheena E Radford

Publications and source records attributed to Sheena E Radford.

At least 19 recordsLinked to original sources

NMR analysis of the conformational properties of the trapped on-pathway folding intermediate of the bacterial immunity protein Im7.

Previous work shows that the transiently populated, on-pathway intermediate in Im7 folding contains three of the four native alpha-helices docked around a core stabilised by native and non-native interactions. To determine the structure and dynamic properties of this species in more detail, we have used protein engineering to trap the intermediate at equilibrium and analysed the resulting proteins using NMR spectroscopy and small angle X-ray scattering. Four variants were created. In L53AI54A, two hydrophobic residues within helix III are truncated, preventing helix III from docking stably onto the developing hydrophobic core. In two other variants, the six residues encompassing the native helix III were replaced with three (H3G3) or six (H3G6) glycine residues. In the fourth variant, YY, two native tyrosine residues (Tyr55 and Tyr56) were re-introduced into H3G6 to examine their role in determining the properties of the intermediate ensemble. All four variants show variable peak intensities and broad peak widths, consistent with these proteins being conformationally dynamic. Chemical shift analyses demonstrated that L53AI54A and YY contain native-like secondary structure in helices I and IV, while helix II is partly formed and helix III is absent. Lack of NOEs and rapid NH exchange for L53AI54A, combined with detailed analysis of the backbone dynamics, indicated that the hydrophobic core of this variant is not uniquely structured, but fluctuates on the NMR timescale. The results demonstrate that though much of the native-like secondary structure of Im7 is present in the variants, their hydrophobic cores remain relatively fluid. The comparison of H3G3/H3G6 and L53AI54A/YY suggests that Tyr55 and/or Tyr56 interact with the three-helix core, leading other residues in this region of the protein to dock with the core as folding progresses. In this respect, the three-helix bundle acts as a template for formation of helix III and the creation of the native fold.

Amino Acid Sequence↗

Characterisation of the conformational properties of urea-unfolded Im7: implications for the early stages of protein folding.

The colicin immunity protein Im7 folds from its unfolded state in 6 M urea to its native four-helix structure through an on-pathway intermediate that lacks one of the helices of the native structure (helix III). In order to further characterize the folding mechanism of Im7, we have studied the conformational properties of the protein unfolded in 6 M urea in detail using heteronuclear NMR. Triple-resonance experiments with 13C/15N-labelled Im7 in 6 M urea provided almost complete resonance assignments for the backbone nuclei, and measurement of backbone 15N relaxation parameters allowed dynamic ordering of the unfolded polypeptide chain to be investigated. Reduced spectral density mapping and fitting backbone R2 relaxation rates to a polymer dynamics model identified four clusters of interacting residues, each predicted by the average area buried upon folding for each residue. Chemical shift analyses and measurement of NOEs detected with a long mixing-time 1H-1H-15N NOESY-HSQC spectrum confirmed the formation of four clusters. Each cluster of interacting side-chains in urea-unfolded Im7 occurs in a region of the protein that forms a helix in the protein, with the largest clusters being associated with the three long helices that are formed in the on-pathway folding intermediate, whilst the smallest cluster forms a helix only in the native state. NMR studies of a Phe15Ala Im7 variant and a protein in which residues 51-56 are replaced by three glycine residues (H3G3 Im7*), indicated that the clusters do not interact with each other, possibly because they are solvated by urea, as indicated by analysis of NOEs between the protein and the solvent. Based on these data, we suggest that dilution of the chaotrope to initiate refolding will result in collapse of the clusters, leading to the formation of persistent helical structure and the generation of the three-helix folding intermediate.

Carrier Proteins↗

Direct observation of oligomeric species formed in the early stages of amyloid fibril formation using electrospray ionisation mass spectrometry.

Numerous debilitating human disorders result from protein misfolding and amyloid formation. Despite the grave nature of these maladies, our understanding of the structural mechanism of fibril assembly is limited. Of paramount importance is the need to identify and characterize oligomeric species formed early during fibril assembly, so that the nature of the initiating assembly mechanism can be revealed and species that may be toxic to cells identified. However, the transient nature of early oligomeric species, combined with their heterogeneity and instability, has precluded detailed analysis to date. Here, we have used electrospray ionisation mass spectrometry (ESI-MS), complemented by analytical ultracentrifugation (AUC) and measurements of thioflavin-T fluorescence, to monitor the early stages of assembly of amyloid-like fibrils formed from human beta-2-microglobulin (beta2m) in vitro. We show that worm-like fibrils that form with nucleation-independent kinetics assemble by a mechanism consistent with monomer addition, with species ranging from monomer to > or = 13-mer being identified directly and uniquely as transient assembly intermediates. By contrast, only monomers, dimers, trimers and tetramers are observed during nucleated growth, which leads to the formation of long straight fibrils. The results highlight the unique power of non-covalent ESI-MS to identify protein assembly intermediates in complex heterogeneous systems and demonstrate its great potential to identify and characterise individual species formed early during amyloid assembly.

Alzheimer Disease↗

The organization of aromatic side groups in an amyloid fibril probed by solid-state 2H and 19F NMR spectroscopy.

Some 25 diseases are associated with proteins and peptides that assemble into amyloid fibrils composed of beta-strands connected by hydrogen bonds oriented parallel to the fiber long axis. There is mounting evidence that amyloid formation involves specific interactions between amino acid side groups, which bring together beta-sheets to form layers with buried and exposed faces. This work demonstrates how a combination of solid-state 2H and 19F NMR experiments can provide constraints on fibril architecture by probing the environment and spatial organisation of aromatic side groups. It is shown that phenylalanine rings within fibrils formed by a decapeptide fragment of the islet amyloid polypeptide, amylin, are highly motionally restrained and are situated within 6.5 A of one another. Taken together with existing structural constraints for this peptide, these results are consistent with a fibril architecture that comprises layers of two or more beta-sheets, with the aromatic residues facing into the inter-sheet space and possibly engaged in pi-pi interactions. The methods presented will be of general utility in exploring the architecture of fibrils of larger, full-length peptides and proteins, including amylin itself.

Amyloid↗

Donor-strand exchange in chaperone-assisted pilus assembly proceeds through a concerted beta strand displacement mechanism.

Gram-negative pathogens commonly use the chaperone-usher pathway to assemble adhesive multisubunit fibers on their surface. In the periplasm, subunits are stabilized by a chaperone that donates a beta strand to complement the subunits' truncated immunoglobulin-like fold. Pilus assembly proceeds through a "donor-strand exchange" (DSE) mechanism whereby this complementary beta strand is replaced by the N-terminal extension (Nte) of an incoming pilus subunit. Using X-ray crystallography and real-time electrospray ionization mass spectrometry (ESI-MS), we demonstrate that DSE requires the formation of a transient ternary complex between the chaperone-subunit complex and the Nte of the next subunit to be assembled. The process is crucially dependent on an initiation site (the P5 pocket) needed to recruit the incoming Nte. The data also suggest a capping reaction displacing DSE toward product formation. These results support a zip-in-zip-out mechanism for DSE and a catalytic role for the usher, the molecular platform at which pili are assembled.

Bacterial Proteins↗

Urea-induced unfolding of the immunity protein Im9 monitored by spFRET.

We have studied the urea-induced unfolding of the E colicin immunity protein Im9 using diffusion single-pair fluorescence resonance energy transfer. Detailed examination of the proximity ratio of the native and denatured molecules over a wide range of urea concentrations suggests that the conformational properties of both species are denaturant-dependent. Whereas native molecules become gradually more expanded as urea concentration increases, denatured molecules show a dramatic dependence of the relationship between proximity ratio and denaturant concentration, consistent with substantial compaction of the denatured ensemble at low denaturant concentrations. Analysis of the widths of the proximity ratio distributions for each state suggests that whereas the native state ensemble is relatively narrow and homogeneous, the denatured state may possess heterogeneity in mildly denaturing conditions.

Bacterial Proteins↗

GroEL: More than Just a folding cage.

The chaperonin GroEL has been thought of as an important but passive player in protein folding, providing an encapsulated environment that allows folding to proceed unimpaired by aggregation. In this issue, Tang et al. (2006) redesign the GroEL central cavity and show that the chaperonin cage can alter the rate of folding and, for some proteins, could even alter the folding mechanism.

Amino Acid Motifs↗

Viscoelastic study of the mechanical unfolding of a protein by AFM.

We have applied a dynamic force modulation technique to the mechanical unfolding of a homopolymer of immunoglobulin (Ig) domains from titin, (C47S C63S I27)5, [(I27)5] to determine the viscoelastic response of single protein molecules as a function of extension. Both the stiffness and the friction of the homopolymer system show a sudden decrease when a protein domain unfolds. The decrease in measured friction suggests that the system is dominated by the internal friction of the (I27)5 molecule and not solvent friction. In the stiffness-extension spectrum we detected an abrupt feature before each unfolding event, the amplitude of which decreased with each consecutive unfolding event. We propose that these features are a clear indication of the formation of the known unfolding intermediate of I27, which has been observed previously in constant velocity unfolding experiments. This simple force modulation AFM technique promises to be a very useful addition to constant velocity experiments providing detailed viscoelastic characterization of single molecules under extension.

Animals↗

Sulfate-induced effects in the on-pathway intermediate of the bacterial immunity protein Im7.

Intermediates have now been identified in the folding of a number of small, single-domain proteins. Here we describe experiments to determine the effect of Na(2)SO(4) on the properties of the on-pathway intermediate formed early during the folding of the four-helical protein, Im7. This intermediate, studied previously in 0.4 M Na(2)SO(4), contains three of the four native helices and is fascinating in that several residues in helices I, II, and IV make non-native interactions that stabilize this state. Whether these contacts form as a consequence of the presence of Na(2)SO(4), however, remained unresolved. Using kinetic analysis of the effect of Na(2)SO(4) on the unfolding and refolding kinetics of Im7*, combined with detailed analysis of the resulting chevron plots, we show that decreasing the concentration of Na(2)SO(4) from 0.4 to 0 M destabilizes the intermediate and rate-limiting transition (TS2) states by 7 and 10 kJ mol(-)(1), respectively, and has little effect on the relative compactness of these states compared with that of the unfolded ensemble (beta(I) approximately 0.8, beta(TS2) approximately 0.9 in 0 to 0.4 M Na(2)SO(4)). Analysis of 10 variants of the protein in 0.2 M Na(2)SO(4) using Phi-values showed that the structural properties of the intermediate and TS2 are not altered significantly by the concentration of the kosmotrope. The data demonstrate that the rapid formation of a compact intermediate stabilized by non-native interactions during Im7* folding is not induced by high concentrations of the stabilizing salt, but is a generic feature of the folding of this protein.

Bacterial Proteins↗

A systematic study of the effect of physiological factors on beta2-microglobulin amyloid formation at neutral pH.

Beta(2)-microglobulin (beta(2)m) forms amyloid fibrils that deposit in the musculo-skeletal system in patients undergoing long-term hemodialysis. How beta(2)m self-assembles in vivo is not understood, since the monomeric wild-type protein is incapable of forming fibrils in isolation in vitro at neutral pH, while elongation of fibril-seeds made from recombinant protein has only been achieved at low pH or at neutral pH in the presence of detergents or cosolvents. Here we describe a systematic study of the effect of 11 physiologically relevant factors on beta(2)m fibrillogenesis at pH 7.0 without denaturants. By comparing the results obtained for the wild-type protein with those of two variants (DeltaN6 and V37A), the role of protein stability in fibrillogenesis is explored. We show that DeltaN6 forms low yields of amyloid-like fibrils at pH 7.0 in the absence of seeds, suggesting that this species could initiate fibrillogenesis in vivo. By contrast, high yields of amyloid-like fibrils are observed for all proteins when assembly is seeded with fibril-seeds formed from recombinant protein at pH 2.5 stabilized by the addition of heparin, serum amyloid P component (SAP), apolipoprotein E (apoE), uremic serum, or synovial fluid. The results suggest that the conditions within the synovium facilitate fibrillogenesis of beta(2)m and show that different physiological factors may act synergistically to promote fibril formation. By comparing the behavior of wild-type beta(2)m with that of DeltaN6 and V37A, we show that the physiologically relevant factors enhance fibrillogenesis by stabilizing fibril-seeds, thereby allowing fibril extension by rare assembly competent species formed by local unfolding of native monomers.

Amyloid↗

Amyloid formation under physiological conditions proceeds via a native-like folding intermediate.

Although most proteins can assemble into amyloid-like fibrils in vitro under extreme conditions, how proteins form amyloid fibrils in vivo remains unresolved. Identifying rare aggregation-prone species under physiologically relevant conditions and defining their structural properties is therefore an important challenge. By solving the folding mechanism of the naturally amyloidogenic protein beta-2-microglobulin at pH 7.0 and 37 degrees C and correlating the concentrations of different species with the rate of fibril elongation, we identify a specific folding intermediate, containing a non-native trans-proline isomer, as the direct precursor of fibril elongation. Structural analysis using NMR shows that this species is highly native-like but contains perturbation of the edge strands that normally protect beta-sandwich proteins from self-association. The results demonstrate that aggregation pathways can involve self-assembly of highly native-like folding intermediates, and have implications for the prevention of this, and other, amyloid disorders.

Amino Acids↗

Investigating the structural properties of amyloid-like fibrils formed in vitro from beta2-microglobulin using limited proteolysis and electrospray ionisation mass spectrometry.

The protein beta(2)-microglobulin (beta(2)m) aggregates to form classical amyloid fibrils in patients undergoing long-term haemodialysis. Amyloid-like fibrils with a cross-beta fold can also be formed from wild-type beta(2)m under acidic conditions in vitro. The morphology of such fibrils depends critically on the conditions used: incubation of beta(2)m in low ionic strength buffers at pH 2.5 results in the formation of long (microm), straight fibrils while, at pH 3.6, short (<500 nm) fibrils form. At higher ionic strengths (0.2-0.4 M) at pH 1.5-3.6, the fibrils have a distinct curved and nodular morphology. To determine the conformational properties of beta(2)m within in vitro fibrils of different morphologies, limited proteolysis of each fibril type using pepsin was performed and the resulting peptide fragments identified by tandem mass spectrometry. For comparison, the proteolytic degradation patterns of monomeric beta(2)m and seven synthetic peptides spanning the entire sequence of the intact protein were similarly analysed. The results show that fibrils with different morphologies result in distinct digestion patterns. While the curved, worm-like fibrils are relatively weakly protected from proteolysis, the long, straight fibrils formed at pH 2.5 at low ionic strength show only a single cut-site at Val9, demonstrating that substantial refolding of the initially acid-denatured and unprotected state of beta(2)m occurs during assembly. The data demonstrate that the organisation of the polypeptide chain in fibrils with different morphological features differs considerably, despite the fact that the fibrils possess a common cross-beta architecture.

Amino Acid Sequence↗

Amyloid under the atomic force microscope.

The atomic force microscope (AFM) is a versatile instrument that can be used to image biological samples at nanometre resolution as well as to measure inter and intra-molecular forces in air and liquid environments. This review summarises the use of AFM applied to protein and peptide self-assembly systems involved in amyloid formation. The technical principles of the AFM are outlined and its advantages and disadvantages are highlighted and discussed in the context of the rapidly developing field of amyloid research.

Amyloid beta-Peptides↗

Determination of an ensemble of structures representing the intermediate state of the bacterial immunity protein Im7.

We present a detailed structural characterization of the intermediate state populated during the folding and unfolding of the bacterial immunity protein Im7. We achieve this result by incorporating a variety of experimental data available for this species in molecular dynamics simulations. First, we define the structure of the exchange-competent intermediate state of Im7 by using equilibrium hydrogen-exchange protection factors. Second, we use this ensemble to predict Phi-values and compare the results with the experimentally determined Phi-values of the kinetic refolding intermediate. Third, we predict chemical-shift measurements and compare them with the measured chemical shifts of a mutational variant of Im7 for which the kinetic folding intermediate is the most stable state populated at equilibrium. Remarkably, we found that the properties of the latter two species are predicted with high accuracy from the exchange-competent intermediate that we determined, suggesting that these three states are characterized by a similar architecture in which helices I, II, and IV are aligned in a native-like, but reorganized, manner. Furthermore, the structural ensemble that we obtained enabled us to rationalize the results of tryptophan fluorescence experiments in the WT protein and a series of mutational variants. The results show that the integration of diverse sets of experimental data at relatively low structural resolution is a powerful approach that can provide insights into the structural organization of this conformationally heterogeneous three-helix intermediate with unprecedented detail and highlight the importance of both native and non-native interactions in stabilizing its structure.

Biophysical Phenomena↗

Mechanical resistance of proteins explained using simple molecular models.

Recent experiments have demonstrated that proteins unfold when two atoms are mechanically pulled apart, and that this process is different to when heated or when a chemical denaturant is added to the solution. Experiments have also shown that the response of proteins to external forces is very diverse, some of them being "hard," and others "soft." Mechanical resistance originates from the presence of barriers on the energy landscape; together, experiment and simulation have demonstrated that unfolding occurs through alternative pathways when different pairs of atoms undergo mechanical extension. Here we use simulation to probe the mechanical resistance of six structurally diverse proteins when pulled in different directions. For this, we use two very different models: a detailed, transferable one, and a coarse-grained, structure-based one. The coarse-grained model gives results that are surprisingly similar to the detailed one and qualitatively agree with experiment; i.e., the mechanical resistance of different proteins or of a single protein pulled in different directions can be predicted by simulation. The results demonstrate the importance of pulling direction relative to the local topology in determining mechanical stability, and rationalize the effect of the location of importation/degradation tags on the rates of mitochondrial import or protein degradation in vivo.

Biophysics↗

Semisynthesis of a glycosylated Im7 analogue for protein folding studies.

To establish a system to address questions concerning the influence of glycosylation on protein folding pathways, we have developed a semisynthetic route toward the immunity protein Im7. This fourhelix protein has been used extensively as model protein for folding studies. Native chemical ligation (NCL) affords an N-linked chitobiose glycoprotein analogue of Im7 with an Ala29Cys mutation. The semisynthetic approach relies on the solid-phase peptide synthesis (SPPS) of N-terminal thioesters (including helix I), in glycosylated or unglycosylated form, in combination with the expression of the C-terminal fragment of Im7 (containing helices II-IV). Detailed kinetic and thermodynamic analysis of the protein folding behavior reveals that semisynthetic Im7 analogues are well suited for protein folding studies and that the folding mechanism of the glycoprotein of this Im7 variant is not significantly altered over the unglycosylated analogue.

Amino Acid Sequence↗

Competing pathways determine fibril morphology in the self-assembly of beta2-microglobulin into amyloid.

Despite its importance in biological phenomena, a comprehensive understanding of the mechanism of amyloid formation remains elusive. Here, we use atomic force microscopy to map the formation of beta2-microglobulin amyloid fibrils with distinct morphologies and persistence lengths, when protein concentration, pH and ionic strength are varied. Using the resulting state-diagrams, we demonstrate the existence of two distinct competitive pathways of assembly, which define an energy landscape that rationalises the sensitivity of fibril morphology on the solution conditions. Importantly, we show that semi-flexible (worm-like) fibrils, which form rapidly during assembly, are kinetically trapped species, formed via a non-nucleated pathway that is explicitly distinct from that leading to the formation of the relatively rigid long-straight fibrils classically associated with amyloid. These semi-flexible fibrils also share an antibody epitope common to other protein oligomers that are known to be toxic species linked to human disease. The results demonstrate the heterogeneity of amyloid assembly, and have important implications for our understanding of the importance of oligomeric states in amyloid disease, the origins of prion strains, and the development of therapeutic strategies.

Amyloid↗

Towards an understanding of the structural molecular mechanism of beta(2)-microglobulin amyloid formation in vitro.

Deriving a complete understanding of protein self-association into amyloid fibrils across multiple distance and time scales is an enormous challenge. At small length scales, a detailed description of the partially folded protein ensemble that participates in self-assembly remains obscure. At larger length scales, amyloid fibrils are often heterogeneous, can form along multiple pathways, and are further complicated by phenomena such as phase-separation. Over the last 5 years, we have used an array of biophysical approaches in order to elucidate the structural and molecular mechanism of amyloid fibril formation, focusing on the all beta-sheet protein, beta(2)-microglubulin (beta(2)m). This protein forms amyloid deposits in the human disease 'dialysis-related amyloidosis' (DRA). We have shown that under acidic conditions beta(2)m rapidly associates in vitro to form amyloid-like fibrils that have different morphological properties, but which contain an underpinning cross-beta structure. In this review, we discuss our current knowledge of the structure of these fibrils, as well as the structural, kinetic and thermodynamic relationship between fibrils with different morphologies. The results provide some of the first insights into the shape of the self-assembly free-energy landscape for this protein and highlight the parallel nature of the assembly process. We include a detailed description of the structure and dynamics of partially folded and acid unfolded species of beta(2)m using NMR, and highlight regions thought to be important in early self-association events. Finally, we discuss briefly how knowledge of assembly mechanisms in vitro can be used to inform the design of therapeutic strategies for this, and other amyloid disorders, and we speculate on how the increasing power of biophysical approaches may lead to a fuller description of protein self-assembly into amyloid in the future.

Amyloid↗