PubMed Health⌕ Search

Biomedical subjects

Sheng Dai

Publications and source records attributed to Sheng Dai.

At least 19 recordsLinked to original sources

Laser light scattering and isothermal titration calorimetric studies of poly(ethylene oxide) aqueous solution in presence of sodium dodecyl sulfate.

The aqueous solution of poly(ethylene oxide) (PEO) in the presence of different concentrations of sodium dodecyl sulfate (SDS) was examined by laser light scattering and isothermal titration calorimetric techniques. A small fraction of PEO aggregates were found to coexist with unimeric PEO chains in dilute solution. The presence of monovalent salt does not alter the hydrodynamic properties of PEO in aqueous solution. Addition of a monovalent anionic surfactant, such as SDS, induces cooperative binding of surfactant monomers to PEO backbones at SDS concentrations ranging from 4.0 mM (critical aggregation concentration) to 16.5 mM (saturation concentration). The hydrodynamic radius of PEO unimers decreases initially and then increases with SDS concentration, resulting from the structural reorganization of the PEO/SDS complex. Beyond the saturation concentration, the hydrodynamic radii of PEO/SDS complex are independent of SDS concentration.

Lasers↗

The aggregation behavior of O-carboxymethylchitosan in dilute aqueous solution.

O-Carboxymethylchitosan (OCMCS) is a kind of biocompatible derivatives of chitosan whose water solubility is strongly dependent on the degree of carboxymethylation. The OCMCS with 100 carboxymethyl groups and 75 amino groups per 100 anhydroglucosamine units of OCMCS was synthesized by the reaction of chitosan and monochloroacetic. When OCMCS was dissolved in water, its solution was neutral and OCMCS behaved like a weak polyanionic polyeclectrolyte because most of carboxylic groups were not dissociated in neutral aqueous solution. The aggregation behavior of OCMCS in aqueous solution was studied by surface tensiometry, steady-state fluorescence spectroscopy and viscometry. The critical aggregation concentration (cac) of OCMCS was determined to be between 0.042 mg/ml and 0.050 mg/ml. The possible aggregation mechanism of OCMCS in water was elucidated.

Biocompatible Materials↗

Facile one-pot synthesis of gold nanoparticles stabilized with bifunctional amino/siloxy ligands.

A method for the direct one-pot synthesis of amine-stabilized gold nanoparticles using 3-(trimethoxysilylpropyl)diethylenetriamine (TMSP dien) is described. The amine groups of this bifunctional molecule act as a stabilizer for gold nanoparticles as they form by reduction of HAuCl4. Highly stable gold nanoparticles with sizes tunable between 8 and 20 nm can be readily obtained. This method is quite simple to implement and environmentally benign as there is no need to add an external reducing reagent. The incorporated siloxy functionality was subsequently used to form a silica shell around the gold particle.

Amines↗

Facile, alternative synthesis of lanthanum phosphate nanocrystals by ultrasonication.

Highly luminescent, rhabdophane (Ce(0.33)La(0.66))PO4.nH2O nanorods and nanoparticles were prepared in aqueous solutions by ultrasonication, at pH 1 and pH 12, respectively. Both nanorods (5 to 9 nm wide and several tens to several hundreds nm long) and nanoparticles (elongated, connected 5 nm particles) were as small and as uniform as products obtained from methods that utilize complexing agents or surfactants, only with no complexing agent. This method of synthesis by ultrasonication is a fast and simple method and it is expected to be applicable for the synthesis of other nanocrystalline lanthanide phosphates.

Journal Article↗

Synthesis and characterization of periodic mesoporous organosilicas as anion exchange resins for perrhenate adsorption.

A new methodology to immobilize ionic liquids through the use of a bridged silsesquioxane N-(3-triethoxysilylpropyl), N(3)-(3-trimethoxysilylpropyl-4,5-dihydroimidazolium iodide that incorporates an ionic functionality for the assembly of novel periodic mesoporous organosilica (PMO) materials has been developed. The resulting PMO materials were investigated for use as novel anion exchange resins for the separation of perrhenate anions in aqueous solution. As compared with cetyltrimethylammonium chloride, 1-hexadecane-3-methylimidazolium bromide has been demonstrated to be a more efficient surfactant template for the generation of mesopores and surface areas for such PMO materials.

Journal Article↗

Pyrolysis of mesoporous silica-immobilized 1,3-diphenylpropane. Impact of pore confinement and size.

Mesoporous silicas such as SBA-15 and MCM-41 are being actively investigated for potential applications in catalysis, separations, and synthesis of nanostructured materials. A new method for functionalizing these mesoporous silicas with aromatic phenols is described. The resulting novel hybrid materials possess silyl aryl ether linkages to the silica surface that are thermally stable to ca. 550 degrees C, but can be easily cleaved at room temperature with aqueous base for quantitative recovery of the organic moieties. The materials have been characterized by nitrogen physisorption, FTIR, NMR, and quantitative analysis of surface coverages. The maximum densities of 1,3-diphenylpropane (DPP) molecules that could be grafted to the surface were less than those measured on a nonporous, fumed silica (Cabosil) and were also found to decrease as a function of decreasing pore size (5.6-1.7 nm). This is a consequence of steric congestion in the pores that is magnified at the smaller pore sizes, consistent with parallel studies conducted using a conventional silylating reagent, 1,1,3,3-tetramethyldisilazane. Pyrolysis of the silica-immobilized DPP revealed that pore confinement leads to enhanced rates and altered product selectivity for this free-radical reaction compared with the nonporous silica, and the rates and selectivities also depended on pore size. The influence of confinement is discussed in terms of enhanced encounter frequencies for bimolecular reaction steps and pore surface curvature that alters the accessibility and resultant selectivity for hydrogen transfer steps.

Journal Article↗

Nanowire array gratings with ZnO combs.

Diffraction gratings are mainly manufactured by mechanical ruling, interference lithography, or resin replication, which generally require expensive equipment, complicated procedures, and a stable environment. We describe the controlled growth of self-organized microscale ZnO comb gratings by a simple one-step thermal evaporation and condensation method. The ZnO combs consist of an array of very uniform, perfectly aligned, evenly spaced and long single-crystalline ZnO nanowires or nanobelts with periods in the range of 0.2 to 2 microm. Diffraction experiments show that the ZnO combs can function as a tiny three-beam divider that may find applications in miniaturized integrated optics such as three-beam optical pickup systems.

Journal Article↗

Polymer-induced fractal patterns of [60]fullerene containing poly(methacrylic acid) in salt solutions.

Well-defined water-soluble pH-responsive [60]fullerene (C60) containing poly(methacrylic acid) (PMAA-b-C60) was synthesized using the atom transfer radical polymerization technique. By varying pH and salt concentration, different types of fractal patterns at nano- to microscopic dimensions were observed for negatively charged PMAA-b-C60, while such structure was not observed for positively charged poly(2-dimethylaminoethyl methacrylate)-b-C60. We demonstrated that negatively charged fullerene containing polymeric systems can serve as excellent nanotemplates for the controlled growth of inorganic crystals at the nano- to micrometer length scale, and the possible mechanism was proposed.

Journal Article↗

13C NMR characterization of the organic constituents in ligand-modified hexagonal mesoporous silicas: media for the synthesis of small, uniform-size gold nanoparticles.

This paper reports the (13)C NMR characterization of functionalized MCM-41's and describes the chemistry that occurs in the pores of these materials in the process of forming gold nanoparticles. Nanoparticles formed on hexagonal mesoporous silica (MCM-41) by hydrogen reduction of chloroauric acid have little affinity for pure silica surfaces. The gold can be removed from the support with very mild treatment, for example, solvent extraction. The loss of gold from the substrate can be prevented using a pore functionalization methodology that entails synthesis of the silica containing polydentate amine functionality chemically bound in the mesopores. The synthetic scheme introduces solvents and templating reagents (surfactants) into the mesopores that are chemically reactive under the conditions required for gold particle formation. Extensive base-catalyzed elimination and nucleophilic substitution reactions involving the tetraalkylammonium surfactant occur during the reduction of chloroauric acid to gold.

Journal Article↗

Fluorinated carbon with ordered mesoporous structure.

Fluorination and structural change of highly ordered mesoporous carbons were studied. Mesoporous and fluorinated carbons with ordered cubic structure were synthesized and characterized with TEM, FTIR, adsorption, and EDX.

Journal Article↗

Nitrogen adsorption characterization of aligned multiwalled carbon nanotubes and their acid modification.

Aligned multiwalled carbon nanotube (CNT) arrays were synthesized by using an iron-based sol-gel catalyst and acetylene as the precursor. These CNTs show high purity, uniform diameters and pore-wall thickness. Low temperature nitrogen adsorption was employed to characterize the structural and surface properties of the as-synthesized sample and that modified with boiling concentrated nitric acid. The adsorption characteristics of the as-synthesized and modified CNTs were thoroughly investigated. High-resolution comparative alpha(s)-plot showed that the nitrogen adsorption on CNTs takes place via a multistage mechanism closely related to their structures. It was also found that the acid modification significantly increased the adsorption energy and enhanced the adsorption capacity under low pressures. High-resolution comparative method provided valuable insights about the surface and pore structures of CNTs.

Adsorption↗

Controlled layer-by-layer formation of ultrathin TiO2 on silver island films via a surface sol-gel method for surface-enhanced Raman scattering measurement.

A surface sol-gel process has been demonstrated to be an effective method for the surface modification of silver island films as unique SERS substrates for monitoring molecular adsorption on a dielectric titania surface. This layer-by-layer approach allows control of the thickness of the dielectric surface with a monolayer precision on silver surfaces. The enhancement of Raman scattering from adsorbed Rhodamine 6G molecules is inversely proportional to the thickness of the titania film, which is consistent with the decay of electromagnetic enhancement. Despite a reduction in the sensitivity of the film, a substantial improvement in the film was achieved as a result of the enhanced stability of this substrate compared to the silver island film without a TiO(2) coating.

Fluorescent Dyes↗

Extraction of cesium ions from aqueous solutions using calix[4]arene-bis(tert-octylbenzo-crown-6) in ionic liquids.

Solvent extraction of cesium ions from aqueous solution to hydrophobic ionic liquids without the introduction of an organophilic anion in the aqueous phase was demonstrated using calix[4]arene-bis(tert-octylbenzo-crown-6) (BOBCalixC6) as an extractant. The selectivity of this extraction process toward cesium ions and the use of a sacrificial cation exchanger (NaBPh(4)) to control loss of imidazolium cation to the aqueous solutions by ion exchange have been investigated.

Journal Article↗

Solvent extraction of sr2+ and cs+ based on room-temperature ionic liquids containing monoaza-substituted crown ethers.

A series of N-alkyl aza-18-crown-6 ethers were synthesized and characterized by NMR spectroscopy and mass spectrometry. These monoaza-substituted crown ethers in ionic liquids were investigated as recyclable extractants for separation of Sr(2+) and Cs(+) from aqueous solutions. The pH-sensitive complexation capability of these ligands allows for a facile stripping process to be developed so that both macrocyclic ligands and ionic liquids can be reused. The extraction efficiencies and selectivities of these monoaza-substituted crown ethers for Na(+), K(+), Cs(+), and Sr(2+) were studied in comparison to those of dicyclohexano-18-crown-6 under the same conditions. The extraction selectivity order for dicyclohexano-18-crown-6 in the ionic liquids investigated here was K(+) >> Sr(2+) > Cs(+) > Na(+). The extraction selectivity order for N-alkyl aza-18-crown-6, in which the alkyl group is varied systematically from ethyl to n-dodecyl, was Sr(2+) >> K(+) > Cs(+) > Na(+) in 1-ethyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide and K(+) > Sr(2+) > Cs(+) > Na(+) in 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl] amide and 1-octyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide. The strong dependence of selectivity on the type of ionic liquid indicates an important role played by solvation in solvent extraction processes based on ionic liquids. The optimization of macrocyclic ligands and ionic liquids led to an extraction system that is highly selective toward Sr(2+).

Journal Article↗