Biomedical subjects

Shiang-Tai Lin

Publications and source records attributed to Shiang-Tai Lin.

5 recordsLinked to original sources

PubMed2006

Entropy of water in the hydration layer of major and minor grooves of DNA.

Transport properties (translational and rotational) of water in the two grooves of the B-DNA duplex are known to be different from those in the bulk. Here, we use a recently developed theoretical scheme to compute the entropies of water molecules in both of the grooves of DNA and compare them with that in the bulk. The scheme requires as input both translational and rotational velocity autocorrelation function (C(V)(t) and C(omega)(t), respectively) data. These velocity autocorrelation functions were computed from an atomistic MD simulation of a B-DNA duplex (36 base pairs long) in explicit water (TIP3P). The average values of the entropy of water at 300 K in both of the grooves of DNA (the TS value in the major groove is 6.71 kcal/mol and that in the minor groove is 6.41 kcal/mol) are found to be significantly lower than that in bulk water (the TS value is 7.27 kcal/mol). Thus, the entropic contribution to the free energy change (TDeltaS) of transferring a minor groove water molecule to the bulk is 0.86 kcal/mol and of transferring a major groove water to the bulk is 0.56 kcal/mol at 300 K, which is to be compared with 1.44 kcal/mol for melting of ice at 273 K. We also calculate the energy of interaction of each water molecule with the rest of the atoms in the system and hence calculate the chemical potential (Helmholtz free energy per water molecule, A = E - TS) in the different domains. The identical free energy value of water molecules in the different domains proves the robustness of the scheme. We propose that the configurational entropy of water in the grooves can be used as a measure of the mobility (or microviscosity) of water molecules in a given domain.

Biophysics↗

PubMed2006

Efficient and accurate solvation energy calculation from polarizable continuum models.

A new approach is proposed to enhance the efficiency and accuracy for calculation of the long-range electrostatic interaction from implicit solvation models, i.e., the polarizable continuum model (PCM) and its variants, conductorlike PCM/conductorlike screening model and integral equation formalism PCM. In these methods the solvent electrostatics effects are represented by a set of discrete apparent charges distributed on tesserae of the molecular cavity surface embedding the solute. In principle, the accuracy of these methods is improved if the cavity surface is tessellated to finer tesserae; however, the computational time is increased rapidly. We show that such undesired dependency between accuracy and efficiency is a result of the inaccurate treatment of the apparent charge self-contribution to the potential and/or electric field. By taking into account the full effects due to the size and curvature of the segment occupied by each apparent charge, the error in calculated electrostatic solvation free energy is essentially zero for ions (point charge at the center of a sphere) regardless of the degree of tessellation used. For molecules where gradient of apparent charge density is nonzero at the cavity surface, we propose a multiple-sampling technique which significantly lowers the calculated error compared to the original PCM methods, especially when very few numbers of tesserae are used.

Journal Article↗

PubMed2005

Nanophase segregation and water dynamics in the dendrion diblock copolymer formed from the Fréchet polyaryl ethereal dendrimer and linear PTFE.

We propose a new material consisting of a dendrion copolymer formed from (a) a water-soluble dendritic polymer and (b) a hydrophobic backbone. Using molecular dynamics simulations techniques, we determine the structure and dynamics of the dendrion formed by second-generation Fréchet polyaryl ethereal dendrimer as the hydrophilic component and linear polytetrafluoroethylene (PTFE) as the hydrophobic polymer, with 5 and 10 wt % of water. We find that this material produces a well-developed nanoscale structure in which water forms a continuous nanophase, making this new family of compounds promising candidates for applications in fuel cell membranes. We find that the water molecules are incorporated into the dendrimer block of the copolymer to form a nanophase-segregated structure. The well-developed nanophase-segregated structures rendered by this material have characteristic dimensions of segregation ( approximately 30 Angstrom) and dendrimer conformational properties that are independent of water content. Calculations of water dynamics and proton transport in these nanophase-segregated structures indicate that the dendrion copolymer membrane with 10 wt % of water content has a water structure and transport properties equivalent to that of the hydrated Nafion membrane with 20 wt % of water content.

Dendrimers↗

PubMed2005

Dynamics and thermodynamics of water in PAMAM dendrimers at subnanosecond time scales.

Atomistic molecular dynamics simulations are used to study generation 5 polyamidoamine (PAMAM) dendrimers immersed in a bath of water. We interpret the results in terms of three classes of water: buried water well inside of the dendrimer surface, surface water associated with the dendrimer-water interface, and bulk water well outside of the dendrimer. We studied the dynamic and thermodynamic properties of the water at three pH values: high pH with none of the primary or tertiary amines protonated, intermediate pH with only the primary amines protonated, and low pH with all amines protonated. For all pH values we find that both buried and surface water exhibit two relaxation times: a fast relaxation ( approximately 1 ps) corresponding to the libration motion of the water and a slow ( approximately 20 ps) diffusional component related to the escaping of water from one domain to another. In contrast for bulk water the fast relaxation is approximately 0.4 ps while the slow relaxation is approximately 14 ps. These results are similar to those found in biological systems, where the fast relaxation is found to be approximately 1 ps while the slow relaxation ranges from 20 to 1000 ps. We used the 2PT MD method to extract the vibrational (power) spectrum and found substantial differences for the three classes of water. The translational diffusion coefficient for buried water is 11-33% (depending on pH) of the bulk value while the surface water is about 80%. The change in rotational diffusion is quite similar: 21-45% of the bulk value for buried water and 80% for surface water. This shows that translational and rotational dynamics of water are affected by the PAMAM-water interactions as well as due to the confinement in the interior of the dendrimer. We find that the reduction of translational or rotational diffusion is accompanied by a blue shift of the corresponding libration motions ( approximately 10 cm(-1) for translation, approximately 35 cm(-1) for rotation), indicating higher local force constants for these motions. These effects are most pronounced for the lowest pH, probably because of the increased rigidity caused by the internal charges. From the vibrational density of states we also calculate the enthalpies and entropies of the various waters. We find that water molecules are enthalpically favored near the PAMAM dendrimer: energy for surface water is approximately 0.1 kcal/mol lower to that in the bulk, and approximately 0.5-0.9 kcal/mol lower for buried water. In contrast, we find that both the buried and surface water are entropically unfavored: buried water is 0.9-2.2 kcal/mol lower than the bulk while the surface water is 0.1-0.2 kcal/mol lower. The net result is a thermodynamically unfavored state of the water surrounding the PAMAM dendrimer: 0.4-1.3 kcal/mol higher for buried water and 0.1-0.2 kcal/mol for surface water. This excess free energy of the surface and buried waters is released when the PAMAM dendrimer binds to DNA or metal ions, providing an extra driving force.

Journal Article↗

PubMed2004

Efficiency of various lattices from hard ball to soft ball: theoretical study of thermodynamic properties of dendrimer liquid crystal from atomistic simulation.

Self-assembled supramolecular organic liquid crystal structures at nanoscale have potential applications in molecular electronics, photonics, and porous nanomaterials. Most of these structures are formed by aggregation of soft spherical supramolecules, which have soft coronas and overlap each other in the packing process. Our main focus here is to study the possible packing mechanisms via molecular dynamics simulations at the atomistic level. We consider the relative stability of various lattices packed by the soft dendrimer balls, first synthesized and characterized by Percec et al. (J. Am. Chem. Soc. 1997, 119, 1539) with different packing methods. The dendrons, which form the soft dendrimer balls, have the character of a hard aromatic region from the point of the cone to the edge with C(12) alkane "hair". After the dendrons pack into a sphere, the core of the sphere has the hard aromatic groups, while the surface is covered with the C(12) alkane "hair". In our studies, we propose three ways to organize the hair on the balls, Smooth/Valentino balls, Sticky/Einstein balls, and Asymmetric/Punk balls, which lead to three different packing mechanisms, Slippery, Sticky, and Anisotropic, respectively. We carry out a series of molecular dynamics (MD) studies on three plausible crystal structures (A15, FCC, and BCC) as a function of density and analyze the MD based on the vibrational density of state (DoS) method to extract the enthalpy, entropy, and free energies of these systems. We find that anisotropic packed A15 is favored over FCC, BCC lattices. Our predicted X-ray intensities of the best structures are in excellent agreement with experiment. "Anisotropic ball packing" proposed here plays an intermediate role between the enthalpy-favored "disk packing" and entropy-favored "isotropic ball packing", which explains the phase transitions at different temperatures. Free energies of various lattices at different densities are essentially the same, indicating that the preferred lattice is not determined during the packing process. Both enthalpy and entropy decrease as the density increases. Free energy change with volume shows two stable phases: the condensed phase and the isolated micelle phase. The interactions between the soft dendrimer balls are found to be lattice dependent when described by a two-body potential because the soft ball self-adjusts its shape and interaction in different lattices. The shape of the free energy potential is similar to that of the "square shoulder potential". A model explaining the packing efficiency of ideal soft balls in various lattices is proposed in terms of geometrical consideration.

Computer Simulation↗