PubMed Health⌕ Search

Biomedical subjects

Shie-Ming Peng

Publications and source records attributed to Shie-Ming Peng.

At least 73 records · Page 4Linked to original sources

Unprecedented chemical transformation of benzaldehyde semicarbazone mediated by osmium.

para-Nitrobenzaldehyde semicarbazone (O(2)N(para)-C(6)H(4)C(H)=N-NH-CO-NH(2)) undergoes unprecedented chemical transformation during its reaction with [Os(PPh(3))(2)(CO)(2)(HCOO)(2)] in different alcoholic (R'OH, R' = CH(2)CH(2)OCH(3), CH(2)CH(3), CH(2)CH(2)CH(3), and CH(2)CH(2)CH(2)CH(3)) solvents whereby the NH(2) group of the semicarbazone ligand is displaced by a OR' group provided by the solvents. The transformed semicarbazone ligand binds to osmium as a bidentate N,O-donor forming five-membered chelate ring to afford complexes of type [Os(PPh(3))(2)(CO)(H)(L-OR')], where L-OR' refers to the transformed semicarbazone ligand. Structure of the [Os(PPh(3))(2)(CO)(H)(L-OCH(2)CH(2)OCH(3))] complex has been determined by X-ray crystallography. All the [Os(PPh(3))(2)(CO)(H)(L-OR')] complexes are diamagnetic and show characteristic (1)H NMR signals. They also show intense absorptions in the visible and ultraviolet region. Cyclic voltammetry on the complexes shows an irreversible oxidative response within 0.69-0.88 V versus SCE.

Journal Article↗

Syntheses and structures of metallocene methyltrihydroborate derivativies: Cp2ZrCl[(mu-H)2BHCH3], Cp2Zr[(mu-H)2BHCH3]2, and Cp2Ti[(mu-H)2BHCH3].

In reactions of zirconocene dichloride, Cp(2)ZrCl(2), with 1 equiv and an excess amount of LiBH(3)CH(3), the methyltrihydroborate complexes, Cp(2)ZrCl[(mu-H)(2)BHCH(3)], 1, and Cp(2)Zr[(mu-H)(2)BHCH(3)](2), 2, were isolated. The reaction of titanocene dichloride, Cp(2)TiCl(2), with an excess amount of LiBH(3)CH(3) produced the monosubstituted methyltrihydroborate complex, Cp(2)Ti[(mu-H)(2)BHCH(3)], 3. The titanium was reduced from Ti(IV) to Ti(III), producing a 17-electron, paramagnetic titanocene complex. Under a dynamic vacuum at room temperature, compound 2 decomposed and produced the zirconium hydride compound Cp(2)ZrH[(mu-H)(2)BHCH(3)]. Single crystal X-ray structures of 1, 2, and 3 were determined. Crystal data for 1: space group P2(1)/c, a = 13.7921(3) A, b = 13.4227(3) A, c = 13.0868(3) A, beta = 91.6448(12) degrees, Z = 8. Crystal data for 2: space group Pna2(1), a = 15.2949(4) A, b = 9.3417(2) A, c = 9.3211(2) A, Z = 4. Crystal data for 3: space group Fmm2, a = 9.1795(3) A, b = 13.0993(5) A, c = 8.8520(3) A, Z = 4.

Journal Article↗

Realizing green phosphorescent light-emitting materials from rhenium(i) pyrazolato diimine complexes.

Two neutral pyrazolato diimine rhenium(I) carbonyl complexes with formula [Re(CO)(3)(N-N)(btpz)] where N-N = 2,2'-bipyridine (1) and 1,10-phenanathroline (2), and btpz = 3,5-bis(trifluoromethyl) pyrazolate, were synthesized and characterized by elemental analysis, routine spectroscopic methods, and single-crystal X-ray diffraction study. Ground and excited state properties of these complexes were investigated by steady-state and time-resolved spectroscopies. Complexes 1 and 2 show photoluminescent emission in both solution and solid-state at room temperature, arising from metal to ligand charge-transfer (MLCT) transition with strong overlapping of intraligand pi --> pi transitions. The long-lived excited state lifetimes of complexes 1 and 2, which are on the order of microseconds, indicate the presence of phosphorescent emission. As these complexes hold the potential to serve as phosphors for organic light-emitting diodes (OLEDs), their electroluminescent performances were evaluated by employing them as dopants of various electron transport layer (ETL) or hole transport layer (HTL) hosts. For complex 1, a green electrophosphorescence emission centered at lambda(max) = 530 nm was observed at low turn-on voltage ( approximately 6 V) with luminous power efficiency of 0.72 lm/W, external quantum efficiency of 0.82%, and luminance of 2300 cd/m(2) at a current density of 100 mA/cm(2).

Journal Article↗

Ruthenium complexes of 2-[(4-(arylamino)phenyl)azo]pyridine formed via regioselective phenyl ring amination of coordinated 2-(phenylazo)pyridine: isolation of products, X-ray structure, and redox and optical properties.

Aromatic ring amination reactions in the ruthenium complex of 2-(phenylazo)pyridine is described. The substitutionally inert cationic brown complex [Ru(pap)(3)](ClO(4))(2) (1) (pap = 2-(phenylazo)pyridine) reacts smoothly with aromatic amines neat and in the presence of air to produce cationic and intense blue complexes [Ru(HL(2))(3)](ClO(4))(2) (2) (HL(2) = 2-[(4-(arylamino)phenyl)azo]pyridine). These were purified on a preparative TLC plate. The X-ray structure of the new and representative complex 2c has been solved to characterize them. The results are compared with those of the starting complex, [Ru(pap)(3)](ClO(4))(2) (1). The transformation 1 --> 2 involves aromatic ring amination at the para carbon (with respect to the diazo function) of the pendant phenyl rings of all three coordinated pap ligands in 1. The transformation is stereoretentive, and the amination reaction is regioselective. The extended ligand HL(2) coordinates as a bidentate ligand and chelates to ruthenium(II) through the pyridine and one of the azo nitrogens. The amine nitrogen of this bears a hydrogen atom and remains uncoordinated. Similarly, the amination reaction on the mixed-ligand complex [Ru(pap)(bpy)(2)](ClO(4))(2) produces the blue complex [Ru(HL(2))(bpy)(2)](ClO(4))(2) (3) as anticipated. The reactions of [RuCl(2)(dmso)(4)] and [Ru(S)(2)(L)(2)](2+) (dmso = dimethyl sulfoxide, S = labile coordinated solvent, L = 2,2'-bipyridine (bpy) and pap) with the preformed HL(2) ligand have been explored. The structure of the representative complex [RuCl(2)(HL(2a))(2)] (5a) is reported. It has the chlorides in trans configuration while the pyridine as well as azo nitrogens are in cis geometry. Optical spectra and redox properties of the newly synthesized complexes are reported. All the ruthenium complexes of HL(2) are characterized by their intense blue solution colors. The lowest energy transitions in these complexes appear near 600 nm, which have been attributed to intraligand charge-transfer transitions. For example, the lowest energy visible range transition in [Ru(HL(2b))(3)](2+) appears at 602 nm and its intensity is 65 510 M(-1) cm(-1). All the tris chelates show multiple-step electron-transfer processes. In [Ru(HL(2))(3)](2+), six reductions waves constitute the complete electron-transfer series. The electrons are believed to be added successively to the three azo functions. In the mixed-ligand chelates [Ru(HL(2))(pap)(2)](2+) and [Ru(HL(2))(bpy)(2)](2+) the reductions due to HL(2), pap, and bpy are observed.

Journal Article↗

Metal-promoted aromatic ring amination and deamination reactions at a diazo ligand coordinated to rhodium and ruthenium.

Reactions of MCl(3).3H(2)O (M = Rh and Ru) with the ligand 2-[(2-N-arylamino)phenylazo]pyridine [HL(1); NH(4)C(5)N=NC(6)H(4)N(H)C(6)H(4)(H) (HL(1a)), NH(4)C(5)N=NC(6)H(4)N(H)C(6)H(4)(CH(3)) (HL(1b)), and NH(4)C(5)N=NC(6)H(4)N(H)C(5)H(4)N (HL(1c))] in the presence of dilute NEt(3) afforded multiple products. In the case of rhodium, two green compounds, viz. [Rh(L(1))(2)](+) ([2](+)) and [RhCl(pap)(L(1))](+) ([3](+)), where L(1) and pap stand for the conjugate base of [HL(1)] and 2-(phenylazo)pyridine, respectively, were separated on a preparative thin layer chromatographic plate. The reaction of RuCl(3).3H(2)O, on the other hand, produced two brown compounds, viz. [RuCl(HL(1))(L(1))] (4) and [RuCl(pap)(L(1))] (5), respectively, as the major products. The X-ray structures of the representative complexes are reported. Except for complex 2, and 4, the products are formed due to the cleavage of an otherwise unreactive C(phenyl)-N(amino) bond. In complex 4, one of the tridentate ligands (HL(1)) does not use its maximum denticity and coordinates as a neutral bidentate donor. Plausible reasons for the differences in their modes of coordination of the ligands as in 2 and 4 have been discussed. The ligand pap in the cationic mixed ligand complex [3](+) reacts instantaneously with ArNH(2) to produce an ink-blue compound, [RhCl(HL(2))(L(1))](+) ([6](+)) in a high yield. The ligand HL(2) is formed due to regioselective fusion of ArNH(2) residue at the para carbon of the phenyl ring (with respect to the azo fragment) of pap in [3](+). The above complexes are generally intensely colored and show strong absorptions in the visible region, which are assigned to intraligand charge transfer transitions. These complexes undergo multiple and successive one-electron-transfer processes at the cathodic potentials. Electrogenerated cationic complexes of ruthenium(III), [4](+) and [5](+), showed rhombic EPR spectra at 77 K.

Journal Article↗

Synthesis and properties of novel thiophene-based conjugated homologues: 9,9-diphenylfluorene-capped oligothiophenes.

[reaction: see text] A series of novel 9,9-diarylfluorene-capped oligothiophenes were synthesized by Suzuki coupling reactions in good yields. The color of the emissions can be controlled by varying the conjugation length of the oligothiophene core. The bulky and rigid terminal groups of the resulting oligomers are significantly beneficial for their high morphological and thermal stability. These new oligothiophenes exhibit intriguing reversible oxidation and reduction redox behavior.

Journal Article↗

Photoinduced and chemical oxidation of coordinated imine to amide in isomeric osmium(II) complexes of N-arylpyridine-2-carboxaldimines. Synthesis, characterization, electron transfer properties, and structural studies.

The reaction of N-arylpyridine-2-carboxaldimine [C(5)H(4)NC(H)NC(6)H(4)R] (HL) with ammonium hexabromoosmate (NH(4))(2)[OsBr(6)] in boiling 2-methoxyethanol afforded a violet solution from which two geometrical isomers of [OsBr(2)(HL)(2)] (1 and 2) were isolated. These are characterized by analytical and spectroscopic data. (1)H NMR spectral data were used for the identification of the isomers. The blue-violet isomer, 1 (designated as ctc), has a 2-fold symmetry axis and gave rise to resonances for only one coordinated HL. The geometry of the ctc-isomer was, however, revealed from the X-ray structure determination of a representative example. The red-violet isomer (2, designated as ccc), on the other hand, is unsymmetrical and gave rise to a large number of proton resonances. The isomeric complexes, [OsBr(2)(HL)(2)], showed intense MLCT transitions in the visible region. This transition, in the ccc-isomer, is slightly (10 nm) red shifted in comparison to the ctc-isomer. These diimine complexes showed one metal based reversible oxidation assignable to the Os(III)/Os(II) process followed by two irreversible oxidations at more anodic potentials (>1.4 V). In addition to these, the complexes also showed two irreversible ligand reductions at high cathodic potentials (<-1.4 V). An unusual type of photochemical transformation of the azomethine function of coordinated HL in osmium compounds 1 is studied. When an air equilibrated acetonitrile solution of 1 was exposed to a xenon lamp, it underwent oxidation affording the mixed ligand, amido complexes of general formula [OsBr(2)(HL)(LO)], 3 (LO = C(5)H(4)NC(O)-N-C(6)H(4)R), in an excellent yield (>95%). This transformation (1 --> 3) was achieved chemically when H(2)O(2) was used as an oxidant. Notably, the chemical oxidation with H(2)O(2) also led to the formation of a tetravalent complex, [OsBr(2)(LO)(2)], 4, as a minor product. Compound 3 was characterized by various spectroscopic and analytical techniques. The room temperature magnetic moment of 3 corresponds to a t(2)(5) configuration for the osmium(III) center. EPR spectra of the amido complexes were recorded at 77 K in 1:1 dichloromethane-toluene glass, and they were anisotropic in nature. FAB mass spectra of 3 displayed intense peaks due to parent molecular ions. For example, the complex [OsBr(2)(HL(1))(L(1)O)], 3a, showed a strong peak at m/z 729 amu. The electronic spectrum of compound 3 consisted of a broad LMCT transition (ca. 525 nm; epsilon, 3000 M(-1) cm(-1)). The cyclic voltammogram of compound 3 consisted of two responses, one each on the positive and negative side of SCE, corresponding to Os(IV)/Os(III) (ca. 0.8V) and Os(III)/Os(II) (ca. -0.3V) couples, respectively. There has been a large cathodic shift of potential for the Os(III)/Os(II) couple in 3 in comparison to that in the parent complex, 1. The diamido compound [OsBr(2)(LO)(2)], 4, is diamagnetic and insoluble in common solvents. The X-ray structure determination of a representative sample, 4a, is reported. The molecule contains a C(2)-symmetry axis with bromide ions in relative cis positions. The Os-N(amide) bond lengths are considerably shorter than the Os-N(pyridine) lengths. All other bond lengths and angles fall within the expected range.

Journal Article↗

Luminescence enhancement induced by aggregation of alkoxy-bridged rhenium(I) molecular rectangles.

Self-assembly of rhenium(I)-based molecular rectangles containing long alkyl chains has been achieved in one-pot synthesis by solvothermal methods. An enormous enhancement in the emission intensity, quantum yield, and lifetime of the rectangles has been observed when the solvent medium is changed from organic to aqueous. Addition of water favors the aggregation of Re(I) molecular rectangle resulting in the luminescence enhancement, and this phenomenon has been traced out using light scattering techniques.

Journal Article↗

Carbonylchromium derivatives of bismuth: new syntheses and relevance to cbond;o activation.

We have discovered a series of novel pentacarbonylchromium derivatives of bismuth from the reactions of NaBiO(3) with [Cr(CO)(6)] in KOH/MeOH solutions. When the reaction was carried out at room temperature, the highly charged [Bi[Cr(CO)(5)](4)](3-) (1) was obtained, whose structure was shown by X-ray analysis to possess a central bismuth atom tetrahedrally coordinated to four [Cr(CO)(5)] groups. As the reaction was heated at 80 degrees C, the methyl-substituted complex [MeBi[Cr(CO)(5)](3)](2-)(2) was obtained, presumably via the CbondO activation of MeOH. Further reactions of 1 with CH(2)Cl(2) or CHtbondCCH(2)Br form the halo-substituted complexes [XBi[Cr(CO)(5)](3)](2-)(X=Cl, 3; Br, 4), respectively. On the other hand, the reactions of 1 with RI (R=Me, Et) led to the formation of the alkyl-substituted complexes [RBi[Cr(CO)(5)](3)](2-)(R=Me, 2; Et). The formation of complexes 1-4 is discussed, presumably via the intermediate bismuthinidene [Bi[Cr(CO)(5)](3)](-) or the trianion [Bi[Cr(CO)(5)](3)](3-).

Journal Article↗

Cu-mediated syntheses of N-fused and ring-modified trithiahexaphyrins.

The reaction of the antiaromatic [28]trithiahexaphyrin (TTHP) with Cu(I) in DMF gives a novel fused-ring trithiahexaphyrin with the elimination of a chloride on a dichlorophenyl ring and bond formation to the outward oriented pyrrolic nitrogen to form a 5,5,6-tricyclic internal ring system. The NMR spectra, which display characteristics of an antiaromatic compound, agree with the proposed structure. Meanwhile, reactions of TTHP with amines in the presence of Cu(I) give amino-group-inserted hexaphyrins with the amino nitrogen joined to a beta-thiophenic carbon and the alpha-carbon of the alkylamine cyclized to the inward pyrrolic nitrogen to form a 5,7,5-tricyclic rings. The crystal structure of the fused-ring product indicates a rectangular geometry with a tilted tricyclic ring system, while the ring-modified TTHP-DMA complex gives a triangular trithiahexaphyrin core. This report demonstrates methods to incorporate functionalized heterocyclic rings into expanded porphyrins.

Journal Article↗

Ter(9,9-diarylfluorene)s: highly efficient blue emitter with promising electrochemical and thermal stability.

Novel ter(9,9-diarylfluorene)s were synthesized by a Suzuki-coupling reaction of 2-bromofluorene (1) and 2,7-fluorenediboronic ester derivatives (3) with high isolated yields (63-86%). The X-ray structure analysis of ter(9,9'-spirobifluorene) (4aa) revealed that the conjugated chromophore adopts a helical conformation. This conformation effectively releases the steric interaction between the fluorene moieties and prevents inter-chromophore interactions. The introduction of aryl groups at the C9 position of fluorene was highly beneficial to the thermal and morphological stability of these oligomers. These terfluorenes exhibit intense blue fluorescence with excellent quantum yields both in solution ( approximately 100%) and in solid state (66-90%), and possess interesting reversible redox properties. Highly efficient blue light-emitting OLED devices were fabricated using 4aa and 4cc as emitters as well as hole transporters. The devices exhibit low turn-on voltage ( approximately 3 V) and high EL external quantum efficiency (2.5-3%).

Journal Article↗

Unsymmetrical linear pentanuclear nickel string complexes: [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3)).

The one-electron oxidized linear pentanuclear nickel complexes [Ni(5)(tpda)(4)(H(2)O)(BF(4))](BF(4))(2) (1) and [Ni(5)(tpda)(4)(SO(3)CF(3))(2)](SO(3)CF(3)) (2) have been synthesized by reacting the neutral compound [Ni(5)(tpda)(4)Cl(2)] with the corresponding silver salts. These compounds have been characterized by various spectroscopic techniques. Compound 1 crystallizes in the monoclinic space group P2(1)/n with a = 15.3022(1) A, b = 31.0705(3) A, c = 15.8109(2) A, beta = 92.2425(4) degrees, V = 7511.49(13) A(3), Z = 4, and compound 2 crystallizes in the monoclinic space group C2/c with a = 42.1894(7) A, b = 17.0770(3) A, c = 21.2117(4) A, beta = 102.5688(8) degrees, V = 14916.1(5) A(3), Z = 8. X-ray structural studies reveal an unsymmetrical Ni(5) unit for both compounds 1 and 2. Compounds 1 and 2 show stronger Ni-Ni interactions as compared to those of the neutral compounds.

Journal Article↗

Dimeric iron n-confused porphyrin complexes.

A dimeric iron N-confused porphyrin, [Fe(NCTPP)]2 was obtained from the anaerobic reaction of Fe(NCTPP)Br with NaSePh while under aerobic conditions a hydroxo bridged iron dimer with Na bridging the outer-N atoms was obtained and oxygenation occurred on the inner core pyrrolic carbon to form a novel ONCTPP porphyrinic ring.

Journal Article↗

Syntheses of ruthenium(II) quinonediimine complexes of cyclam and characterization of their DNA-binding activities and cytotoxicity.

The synthesis and characterization of ruthenium(II) complexes, [Ru(cyclam)(bqdi)] x ZnCl(4) (1 x ZnCl(4); cyclam = 1,4,8,11-tetraazacyclotetradecane, bqdi = o-benzoquinonediimine), [Ru(cyclam)(nqdi)] x (ClO(4))(2) (2 x (ClO(4))(2); nqdi = 2,3-naphthoquinonediimine), and [Ru(cyclam)(phi)] x (ClO(4))(2) (3 x (ClO(4))(2); phi = 9,10-phenanthroquinonediimine), are described. The DNA binding properties and biological activity of the Ru(II) complexes were studied by various biophysical and cytological techniques. As expected, only 3 showed significant binding with DNA. The thermodynamic profile of the binding of 3 and DNA was constructed by analyzing the experimental data of absorption titration and UV melting studies with the McGhee equation, van't Hoff's equation, and the Gibbs-Helmholtz equation. Compound 3 binds double-stranded DNA with a binding constant of 5.0 x 10(4) M(-1) at 20 degrees C, and the binding mode of the complex to DNA was proved to be intercalative. Cytotoxicity and induced type of cell death of 1-3 were also investigated. Basically, metal complexes with ligands of molecular shape closely related to the structure of DNA are more likely to bind DNA and possess higher toxicity.

ATP Binding Cassette Transporter, Subfamily B, Mem↗

A convergent synthetic approach using sterically demanding aryldipyrrylmethanes for tuning the pocket sizes of cofacial bisporphyrins.

Meso substitution opposite to the spacer provides a convenient approach for tuning the pocket sizes of pillared cofacial bisporphyrins. The synthesis and coordination chemistry of xanthene and dibenzofuran anchored platforms structurally modified with 2,6-dimethoxyaryl groups are described. Comparative structural analysis of xanthene derivatives confirms the ability of the trans-aryl groups to adjust the vertical dimension of the cofacial cleft: 7 (C(97)H(106)Cl(4)N(8)O(5)), monoclinic, space group P2(1)/c, a = 28.8353(12) A, b = 17.1139(7) A, c = 17.5978(7) A, beta = 98.826(1) degrees, Z = 4; 8 (C(101)H(123)Cl(2)N(8)O(11.5)Zn(2)), monoclinic, space group P2(1)/n, a = 14.5517(6) A, b = 22.9226(10) A, c = 28.5155(13) A, beta = 90.312(14) degrees, Z = 4; 12 (C(99)H(102)Cl(14)N(8)O(5)Mn(2)), monoclinic, space group P2/c, a = 19.5891(3) A, b = 15.0741(2) A, c = 33.2019(6) A, beta = 91.947(10) degrees, Z = 4. The convenience and versatility of this synthetic method offers intriguing opportunities to specifically tailor the binding pockets of cofacial bisporphyrins for the study of small-molecule activation within a proton-coupled electron transfer framework.

Benzofurans↗

Self-complementarity of oligo-2-aminopyridines: a new class of hydrogen-bonded ladders.

A new class of hydrogen-bonded ladders based on hydrogen-bonded dimerization of oligo-alpha-aminopryidines has been demonstrated. Jorgensen's model can be successfully applied to this hydrogen-bonding system in nonpolar solvents. The results show the competitive enthalpy/entropy compensation relationship upon dimerization. Although increasing the number of hydrogen-bonding interactions would enhance the hydrogen-bonding stabilization enthalpy, this stabilization enthalpy per unit would be partially sacrificed to compensate for the entropy loss due to dimerization. These results clearly support the importance of preorganization in designing hydrogen-bonding guest-host molecules.

Journal Article↗

Suzuki coupling approach for the synthesis of phenylene-pyrimidine alternating oligomers for blue light-emitting material.

[reaction: see text] Conjugated oligomers with an alternating phenylene-pyrimidine structure have been synthesized by the successive Suzuki coupling reaction starting from 2-bromo-5-iodopyrimidine. The photoluminescence properties and quasi-reversible redox behavior of these oligomers make them applicable as an active material for a light-emitting device. Blue light-emitting electroluminescent devices with an external quantum efficiency up to 1.8% have been fabricated.

Journal Article↗