Biomedical subjects

Shingo Masuda

Publications and source records attributed to Shingo Masuda.

5 recordsLinked to original sources

PubMed2006

Repair of 20-mm long rabbit radial bone defects using BMP-derived peptide combined with an alpha-tricalcium phosphate scaffold.

In previous studies, we have reported that the BMP-2-derived peptide KIPKASSVPTELSAISTLYL, corresponding to BMP-2 residues 73-92, binds to a BMP-2-specific receptor, and elevates both alkaline phosphatase activity and osteocalcin mRNA in the murine mesenchymal cell line, C3H10T1/2. This 73-92 peptide conjugated to a covalently crosslinked alginate gel induced ectopic bone formation in rat calf muscle, and activated osteoblasts to promote the repair of rat tibial bone defects. Here, we report repair of 20-mm long rabbit radial bone defects using the 73-92 peptide combined with a porous alpha-tricalcium phosphate (TCP) scaffold. In vitro, the 73-92 peptide was released from the porous alpha-TCP scaffold over more than one week. In vivo, radiomorphometric analysis showed that the 73-92 peptide combined with the porous alpha-TCP scaffold promoted calcification in the implanted area in a dose-dependent manner, and that 5 mg of the 73-92 peptide induced connection of 20-mm long defects, defects of critical size, 12 weeks after implantation. Histological examination revealed newly formed bone and a marrow cavity in the implanted area. The area of bone denser than 690 mg/cm(3) induced by the 73-92 peptide was nearly equal to that of the contralateral radius.

Amino Acid Sequence↗

PubMed2006

A gridified protein structure prediction system "Rokky-G" and its implementation issues.

In recent years, simulation using computer systems has been of increasing importance in the life sciences. We have developed a system called "Rokky-G" that facilitates a protein structure prediction strategy called "Rokky" on Grid systems. Rokky-G provides the framework of protein structure prediction on the Grid. In this paper we discuss the architecture of Rokky-G and implementation issues identified in order to obtain highly reliable results.

Algorithms↗

PubMed2005

Change in UHMWPE properties of retrieved ceramic total knee prosthesis in clinical use for 23 years.

The alumina-ceramic total knee prosthesis developed by Kyocera Corp. was implanted in 1979, and was in clinical use for 23 years until total knee arthroplasty revision surgery in January 2002. It is believed that this is the longest clinical period of a ceramic total knee prosthesis reported to date in the world. In the present study, we gave consideration to the long-term clinical stability of the alumina-ceramic femoral component as well as the mechanism of in vivo degradation of ultrahigh molecular weight polyethylene (UHMWPE) based on the evaluated wear, oxidation, and fracture toughness of the retrieved UHMWPE. We concluded that the degradation of UHMWPE by progressive oxidation is an issue to be solved in the future. To moderate stress concentration, use of a thin UHMWPE insert should be avoided. The low wear rate and the mild wear pattern observed this time suggest the possibility of reduced wear of the UHMWPE against the alumina-ceramic femoral component, and the usefulness of the alumina-ceramic total knee prosthesis component was recognized even after long clinical use.

Ceramics↗

PubMed2004

In vitro cytocompatibility assessment of beta-tricalcium phosphate/carboxymethyl-chitin composite.

A novel bioabsorbable bone substitute composed of a beta-tricalcium phosphate (beta-TCP) and a carboxymethyl-chitin (CM-chitin) sodium has been developed. Rabbit tibia defects (4 mm in diameter) were repaired after 4 weeks more effectively by the composite compared with a sham-operation group. To further investigate the biological safety of the components, genotoxicity and carcinogenicity of an extract prepared from the composite were determined using four different in vitro assays. The main extract component was identified as CM-chitin sodium [average molecular weight (Mw) approximately 230 kDa] as determined by Fourier transform infrared spectroscopy and gel permeation chromatography analysis. The concentrations of P and Ca possibly derived from beta-TCP were 17.7 and 37.1 microg/g, respectively, as determined by inductively coupled plasma mass spectroscopy. Both the metabolic activation and nonactivation (-S9) systems of the rat microsome S9 fraction were used to perform a genotoxicity evaluation using the Ames test and chromosome aberration assay on Chinese hamster lung fibroblast cells treated with the extract. In these assays, no genotoxicity was detected with doses < or =5 mg/mL (maximum concentration). The cell transformation assay using BALB/c 3T3 cells and the metabolic cooperation assay with V79 cells both showed negative results for any tumor-promoting activity caused by the extract (approximately 5 mg/mL). These results indicate that the bioabsorbable beta-TCP/CM-chitin composite is a highly biocompatible bone substitute.

3T3 Cells↗

PubMed2004

Assessment of wear in extensively irradiated UHMWPE cups in simulator studies.

Higher levels of UHMWPE crosslinking currently are being advocated for improved wear resistance of acetabular cups. Pioneering Japanese studies, begun in 1971, have achieved good clinical results with UHMWPE irradiated to 1000 kGy for use with a cemented-cup design. The objective of our study was to use contemporary simulator techniques to determine the in vitro wear performance of such high-dose irradiated cups. Extruded UHMWPE cups were processed with 500, 1000, and 1500 kGy of gamma-radiation doses under vacuum, annealed, and machined to shape. The cups were mated with 26-mm alumina heads and run in a multidirectional simulator with bovine serum. Over a 6-million cycle (Mc) study, the weight loss of the nonirradiated control cups averaged 52.8 mg/Mc + 1.4% (wear = 57.2 mm(3)/Mc). In contrast, the irradiated wear cups had a consistent weight gain. Thus cups with irradiation of 500-1500 kGy had no detectable wear in this study. The original machining marks still were partially evident in the wear zones, along with some macrofissures in the 1000- and 1500-kGy cups. Areas adjacent to the fissures showed delaminating plaques of 100-300 microm in size. It also was noted that the wear cups systematically gained more weight than their corresponding soak controls. Each 200-kGy radiation gain increased the fluid sorption ratio by 10%. The increased fluid sorption and evidence of some surface deterioration may indicate that such high-dose irradiated cups are more susceptible to mechanical damage. This indicates that we should take care to ensure that our desire to reduce the wear debris to a zero amount does not result in a modified UHMWPE that lacks the necessary mechanical properties for contemporary metal-backed cup designs.

Absorption↗