Biomedical subjects

Shirui Mao

Publications and source records attributed to Shirui Mao.

10 recordsLinked to original sources

PubMed2006

Effect of WOW process parameters on morphology and burst release of FITC-dextran loaded PLGA microspheres.

Using fluorescein isothiocyanate labeled dextran (FITC-dextran 40, FD40) as a hydrophilic model compound, microspheres were prepared by a WOW double emulsion technique. Influence of process parameters on microsphere morphology and burst release of FD40 from PLGA microspheres was studied. Internal morphology of microspheres was investigated by stereological method via cryo-cutting technique and scanning electron microscopy (SEM). Drug distribution in microspheres was observed with confocal laser scanning microscopy (CLSM). Polymer nature (RG503 and RG503H) had significant influence on the micro-morphology of microspheres. Increase in continuous water phase volume (W2) led to increased surface porosity but decreased internal porosity. By increasing PVA concentration in the continuous phase from 0.1 to 1%, particle size changed marginally but burst release decreased from 12.2 to 5.9%. Internal porosity of microspheres decreased considerably with increasing polymer concentration. Increase in homogenization speed during the primary emulsion preparation led to decreased internal porosity. Burst release decreased with increasing drug loading but increased with drug molecular weight. Drug distribution in microspheres depended on preparation method. The porosity of microspheres decreased with time in the diffusion stage, but internal morphology had no influence on the release behavior in the bioerosion stage. In summary, surface porosity and internal morphology play a significant role in the release of hydrophilic macromolecules from biodegradable microspheres in the initial release phase characterized by pore diffusion.

Calorimetry, Differential Scanning↗

PubMed2006

Self-assembled polyelectrolyte nanocomplexes between chitosan derivatives and insulin.

Polyelectrolyte complexes (PEC) formed from chitosan derivatives and insulin was prepared and parameters influencing complex formation were characterized. Turbidimetric titration, in combination with dynamic light scattering (DLS) and laser doppler anemometry (LDA), were used to study the complexation process. The morphology of the PECs was determined using atomic force microscopy (AFM). PEC formation was predominantly pH-dependent. Complexation with insulin occurred only above critical pH value (pHc) of 6.0 for all the chitosan derivatives investigated. Soluble PECs in the size range of 200-500 nm with spherical or subspherical morphology and smooth surface structure were obtained at optimized polymer/insulin charge ratios. Optimal conditions were obtained when the pH of PECs was in the range of 6.5-8.0, depending on polymer structure. The stability of PECs was influenced by polymer chain length. Only when the MW of the polymers was > or =25-kDa PEC precipitation could be avoided. An increase in the ionic strength of the medium accelerated complex dissociation. Chitosan methylation and PEGylation significantly improved the stability of insulin in the PECs. Moreover, the PEC could protect insulin from degradation even at 50 degrees C for at least 6 h. All complexes could be lyophilized without influencing the particle size, complex concentration, and stability of insulin. On the basis of our results, we suggest that interactions involved in PEC formation were predominantly electrostatic in nature, involving the positively charged amino groups of chitosan and the negatively charged insulin above its isoelectric point. Intranasal absorption of the polyelectrolyte nanocomplexes will be studied in vivo.

Chitosan↗

PubMed2006

Pharmacodynamics and potential toxicity of intranasally administered dipyrone.

Dipyrone is a non-narcotic analgesic and antipyretic drug used in both pediatric and adult patients. Dipyrone solution can be used intranasally as an antipyretic agent for infants. However, dipyrone is not stable in liquid state. Therefore, a stable dipyrone formulation was developed and the antipyretic effect of the formulation was studied after intranasal administration in rabbits and rats, respectively. To guarantee dose accuracy in animal studies, effect of dose volume on the distribution of dipyrone solution in rabbit nasal cavities were studied, using gentian violet as an indicator. Animal fever model and intranasal administration methods were established. In addition, the potential toxicity of the dipyrone formulation was studied. It was shown that the nasal volume of rabbits is large enough to hold 100 microl solution. After intranasal administration, improved pharmacodynamics was obtained with the new developed dipyrone formulation compared to the normal dipyrone solution, and significantly decreased body temperature was observed 10 min after dosing. The toxicity was negligible. In conclusion, the dipyrone formulation is effective and safe for clinical medication.

Administration, Intranasal↗

PubMed2005

Uptake and transport of PEG-graft-trimethyl-chitosan copolymer-insulin nanocomplexes by epithelial cells.

PURPOSE: The effect of chitosan and polyethylene glycol (PEG)ylated trimethyl chitosan copolymer structure on the uptake and transport of insulin nanocomplexes was evaluated and transport mechanisms were investigated. METHODS: Insulin nanocomplexes were prepared from chitosan and its copolymers by self-assembly. Complex uptake in Caco-2 cells was quantified by measuring the cell-associated fluorescence and cellular localization was visualized by confocal laser scanning microscopy (CLSM) using tetra-methyl-rhodamine isothiocyanate-labeled insulin. The transport of selected insulin complexes through Caco-2 monolayers was then investigated and compared with in vivo uptake by nasal epithelium in diabetic rats. RESULTS: All complexes were 200-400 nm in diameter, positively charged, and displayed an insulin loading efficiency of approximately 90%. In vitro release of insulin from the complexes was dependent on the medium pH. Insulin uptake was enhanced by nanocomplex formation, and was dependent on incubation time, temperature, and concentration. Complex uptake in Caco-2 cells was inhibited by 25.2 +/- 1.3%, 13.0 +/- 1.0%, and 16.6 +/- 0.7% in the presence of cytochalasin D, sodium azide, and 2,4-dinitrophenol, respectively. The uptake mechanism was assumed to be adsorptive endocytosis. Additionally, cell uptake efficiency was shown to be influenced by a combination of polymer molecular weight, viscosity, and positive charge density. However, none of the nanocomplexes displayed improved transport properties when compared to insulin transport data after 2 h incubation with Caco-2 monolayers. This result was further confirmed with animal experiments. CONCLUSIONS: Small, stable insulin nanocomplexes were formed using PEGylated trimethyl chitosan copolymers, which significantly enhanced the uptake of insulin in Caco-2 cells by adsorptive endocytosis. However, nanocomplexation did not seem to enhance transcellular insulin transport across cell monolayers, which is in line with animal data in rats. This implies that PEGylated trimethyl chitosan complexes with insulin need further optimization and the Caco-2 cell line is a predictable in vitro cell culture model for drug absorption.

Algorithms↗

PubMed2005

Synthesis, characterization and cytotoxicity of poly(ethylene glycol)-graft-trimethyl chitosan block copolymers.

PEGylated trimethyl chitosan (TMC) copolymers were synthesized in an attempt to both increase the solubility of chitosan in water, and improve the biocompatibility of TMC. A series of copolymers with different degrees of substitution were obtained by grafting activated poly(ethylene glycol)s (PEG) of different MW onto TMC via primary amino groups. Structure of the copolymers was characterized using 1H, 13C NMR spectroscopy and GPC. Solubility experiments demonstrated that PEG-g-TMC copolymers were completely water-soluble over the entire pH range of 1-14 regardless of the PEG MW, even when the graft density was as low as 10%. Using the methyl tetrazolium (MTT) assay, the effect of TMC molecular weight, PEGylation ratio, PEG and TMC molecular weight in the copolymers, and complexation with insulin on the cytotoxicity of TMC was examined, and IC50 values were calculated with L929 cell line. All polymers exhibited a time- and dose-dependent cytotoxic response that increased with molecular weight. PEGylation can decrease the cytotoxicity of TMC to a great extent in the case of low molecular weight TMCs. According to the cytotoxicity results, PEG 5 kDa is superior for PEGylation when compared to PEG 550 Da at similar graft ratios. Complexation with insulin further increased cell viability. In addition, Lactate dehydrogenase (LDH) assays were performed to quantify the membrane-damaging effects of the copolymers, which is in line with the conclusion drawn from MTT assay. Moreover, the safety of the copolymers was corroborated by observing the morphological change of the cells with inverted phase contrast microscopy. Based upon these results PEG-g-TMC merits further investigations as a drug delivery vehicle.

Animals↗

PubMed2005

Characterization and body distribution of beta-elemene solid lipid nanoparticles (SLN).

Solid lipid nanoparticles (SLN) containing beta-elemene, a volatile oil used for the treatment of cancer, were prepared by the method combining probe sonication and membrane extrusion. Effects of the formulations and procedures on the characteristics of SLN were investigated. Body distribution of beta-elemene SLN in rats after intravenous administration was compared with that of the commercial emulsion. The results showed that dispersing the surfactant in the melted lipid matrix could obtain smaller particles than that dispersing in the water phase. Increasing the ratio of monostearin in the lipid matrix or the concentration of surfactant reduced the mean volume size of the SLN. Optimized formulation was composed of monostearin and precirol ATO 5 at a mass ratio of 3:7, which was quite stable for 8 months at room temperature. In vitro release of beta-elemene from the SLN was slow and stable without obvious burst release and was found to follow the Higuich equation. After intravenous administration, the beta-elemene levels after 5 min injection of SLN formulation were 1.5, 2.9, and 1.4 times higher than those of beta-elemene emulsion in liver, spleen, and kidney, respectively, while the concentrations of beta-elemene were decreased 30% in heart and lung. Therefore, the SLN containing beta-elemene might be an attractive candidate for the treatment of liver cancer.

Animals↗

PubMed2005

Investigations on 5-fluorouracil solid lipid nanoparticles (SLN) prepared by hot homogenization.

The purpose of this study was to investigate the effect of different formulation factors on the properties of solid lipid nanoparticles (SLN) prepared by a hot homogenization method. Using the particle size, physical stability constant (K(e)) and zeta-potential as standards, the stability of SLNs was investigated as a function of phospholipid and poloxamer contents. It was demonstrated that the content of phospholipid had a significant influence on the zeta-potential, which increased considerably with increasing phospholipid content. However, the particle size increased remarkably when the phospholipid content was as high as 1.5% due to the increased viscosity. Poloxamer 188 exhibited no remarkable influence on particle size when the concentration was as low as 1.0%. The influence of the phospholipid and poloxamer content on the embedding ratios of drug substances was further studied using 5-fluorouracil (5-Fu) as a model drug. It was shown that the embedding ratio increased considerably with phospholipid content and independent of poloxamer content, implying that 5-Fu was incorporated into the phospholipid bilayer membrane.

Algorithms↗

PubMed2004

The depolymerization of chitosan: effects on physicochemical and biological properties.

Chitosan has been extensively used as an absorption enhancer for macromolecules and as gene delivery vehicle. Both properties are molecular weight (MW) dependent. Here, we investigate factors affecting the oxidative depolymerization of chitosan and physicochemical properties of the resulting polymer fractions including their cytotoxicity. The molecular weight of the depolymerized chitosan was influenced by the initial concentration and the source of chitosan. At constant initial concentrations, the molecular weight decreased linearly with the chitosan/NaNO2 ratio and was a function of logarithm of the reaction time. Chitosan with larger molecular weight was more sensitive to depolymerization. No structural change was observed during the depolymerization process by infrared and proton nuclear magnetic resonance spectroscopy. In addition, thermal properties of chitosan fragments were studied by thermal gravimetric analysis and it was found that the decomposition temperature was molecular weight dependent. Furthermore, the solubility of different molecular weight chitosan was assayed as a function of pH and it increased with decreasing molecular weight. The cytotoxicity of chitosan was concentration dependent but almost molecular weight independent according to MTT assay using L929 cell line recommended by USP26. In summary, low molecular weight fractions of chitosan may potentially useful for the design of drug delivery systems due to the improved solubility properties.

Biocompatible Materials↗

PubMed2004

Intranasal administration of melatonin starch microspheres.

Using melatonin as model drug, starch microspheres for intranasal administration were prepared by an emulsification-crosslinking technique using a uniform design to optimize preparation conditions. The entrapment ratio of melatonin in the microspheres was 11.0% and particle sizes ranged from 30 to 60 microm. Melatonin was released from the microspheres in a sustained manner in vitro. Nasal clearance of 99mTC labeled starch microspheres was investigated using gamma scintigraphy. It was revealed that >80% of the starch microspheres could be detected in the nasal tissue 2h after administration, compared to 30% for a solution. The pharmacokinetics of melatonin starch microspheres was investigated after intranasal administration. The absorption rate was rapid (T(max) min), and the absolute bioavailability was high, 84.07%. A good correlation was found between in vitro release and in vivo absorption data.

Administration, Intranasal↗

PubMedDate not supplied

Influence of polyethylene glycol chain length on the physicochemical and biological properties of poly(ethylene imine)-graft-poly(ethylene glycol) block copolymer/SiRNA polyplexes.

Polyplexes between siRNA and poly(ethylene imine) (PEI) derivatives are promising nonviral carriers for siRNA. The polyplex stability is of critical importance for efficient siRNA delivery to the cytoplasm. Here, we investigate the effect of PEGylation at a constant ratio ( approximately 50%) on the biophysical properties of the polyplexes. Particle size, zeta potential, and stability against heparin as well as RNase digestion and reporter gene knockdown under in vitro conditions of different siRNA polyplexes were characterized. Stability and size of siRNA polyplexes were clearly influenced by PEI-PEG structure, and high degrees of substitution such as PEI(25k)-g-PEG(550)(30) resulted in large (300-400 nm), diffuse complexes (AFM) which showed condensation behavior only at high N/P ratios. All other polyplexes and the PEI control showed similar sizes (150 nm) and compact structures in AFM, with complete condensation reached at N/P ratio of 3. Stability of siRNA polyplexes against heparin displacement and RNase digestion could be modified by PEGylation. Protection against RNase digestion was highest for PEI(25k)-g-PEG(5k)(4) and PEI(25k)-g-PEG(20k)(1), while siRNA/PEI provided insufficient protection. In knockdown experiments using NIH/3T3 fibroblasts stably expressing beta-galactosidase, it was shown that PEG chain length had a significant influence on biological activity of siRNA. Polyplexes with siRNA containing PEI(25k)-g-PEG(5k)(4) and PEI(25k)-g-PEG(20k)(1) yielded similar efficiencies of ca. 70% knockdown as lipofectamine controls. Confocal microscopy demonstrated enhanced cellular uptake of siRNA into cytosol by polyplexes formation with PEI copolymers. In conclusion, both the chain length and graft density of PEG were found to strongly influence siRNA condensation and stability and hence affect the knockdown efficiency of PEI-PEG/siRNA polyplexes.

Animals↗