Biomedical subjects

Siegmar Roth

Publications and source records attributed to Siegmar Roth.

8 recordsLinked to original sources

PubMed2006

The degree and kind of agglomeration affect carbon nanotube cytotoxicity.

The urgent need for toxicological studies on carbon nanotubes (CNTs) has arisen from the rapidly emerging applications of CNTs well beyond material science and engineering. In order to provide a basis for comparison to existing epidemiological data, we have investigated CNTs at various degrees of agglomeration using an in vitro cytotoxicity study with human MSTO-211H cells. Non-cytotoxic polyoxyethylene sorbitan monooleate was found to well-disperse CNT. In the present study, the cytotoxic effects of well-dispersed CNT were compared with that of conventionally purified rope-like agglomerated CNTs and asbestos as a reference. While suspended CNT-bundles were less cytotoxic than asbestos, rope-like agglomerates induced more pronounced cytotoxic effects than asbestos fibres at the same concentrations. The study underlines the need for thorough materials characterization prior to toxicological studies and corroborates the role of agglomeration in the cytotoxic effect of nanomaterials.

Asbestos, Crocidolite↗

PubMed2006

Poly(L-lactide) (PLLA)/multiwalled carbon nanotube (MWCNT) composite: characterization and biocompatibility evaluation.

Much effort has been directed at the fabrication of carbon nanotubes (CNTs)/polymer composites and the characterization of their physical properties. Among them, composites comprising CNTs and the biocompatible polymers are of special interest due to their potential for specific biomedical applications. we report the preparation of the MWCNT/poly(L-lactide) composite and the corresponding spectroscopic (Raman) and the microscopic (SEM, TEM) characterization. The electronic transport, thermal properties, and biocompatibility of this composite have also been investigated. The Raman spectroscopic analysis suggests the interaction between PLLA and MWCNT occurs mainly through the hydrophobic C-CH3 functional groups. The DC conductivity of the composite increases as the MWCNT loading is increased. Such behavior can be described by a percolation mechanism in which a percolation threshold at about 14 wt % MWCNT loading is observed with the maximum end conductivity of 0.1 S x cm(-1). The DSC study of the PLLA/MWCNT composite reveals that the MWCNTs in the composite have the effect of inducing crystallization and plasticizing the polymer matrix. The results from the cell culture test suggest that the presence of MWCNT in the composite inhibits the growth of the fibroblast cells.

Biocompatible Materials↗

PubMed2005

Raman modes of index-identified freestanding single-walled carbon nanotubes.

Using electron diffraction on freestanding single-walled carbon nanotubes, we have determined the structural indices (n,m) of tubes in the diameter range from 1.4 to 3 nm. On the same freestanding tubes, we have recorded Raman spectra of the tangential modes and the radial breathing mode. For the smaller diameters (1.4-1.7 nm), these measurements confirm previously established radial breathing mode frequency versus diameter relations and would be consistent with the theoretically predicted proportionality to the inverse diameter. However, for extending the relation to larger diameters, either a yet unexplained environmental constant has to be assumed, or the linear relation has to be abandoned.

Journal Article↗

PubMed2005

Single-molecule torsional pendulum.

We have built a torsional pendulum based on an individual single-walled carbon nanotube, which is used as a torsional spring and mechanical support for the moving part. The moving part can be rotated by an electric field, resulting in large but fully elastic torsional deformations of the nanotube. As a result of the extremely small restoring force associated with the torsional deformation of a single molecule, unusually large oscillations are excited by the thermal energy of the pendulum. By diffraction analysis, we are able to determine the handedness of the molecule in our device. Mechanical devices with molecular-scale components are potential building blocks for nanoelectromechanical systems and may also serve as sensors or actuators.

Journal Article↗

PubMed2005

Electron diffraction analysis of individual single-walled carbon nanotubes.

We present a detailed electron diffraction study of individual single-walled carbon nanotubes. A novel sample preparation procedure provides well-separated, long and straight individual single-shell nanotubes. Diffraction experiments are carried out at 60 kV, below the threshold for knock-on damage in carbon nanotubes. We describe experimental parameters that allow single-tube electron diffraction experiments with widely available thermal emission transmission electron microscopes. Further, we review the simulation of diffraction patterns for these objects.

Journal Article↗

PubMed2005

Effect of SOCl2 treatment on electrical and mechanical properties of single-wall carbon nanotube networks.

Chemical modification by SOCl2 of an entangled network of purified single-wall carbon nanotubes, also known as 'bucky paper', is reported to profoundly change the electrical and mechanical properties of this system. Four-probe measurements indicate a conductivity increase by up to a factor of 5 at room temperature and an even more pronounced increase at lower temperatures. This chemical modification also improves the mechanical properties of SWNT networks. Whereas the pristine sample shows an overall semiconducting character, the modified material behaves as a metal. The effect of SOCl2 is studied in terms of chemical doping of the nanotube network. We identified the microscopic origin of these changes using SEM, XPS, NEXAFS, EDX, and Raman spectroscopy measurements and ab initio calculations. We interpret the SOCl2-induced conductivity increase by p-type doping of the pristine material. This conclusion is reached by electronic structure calculations, which indicate a Fermi level shift into the valence band, and is consistent with the temperature dependence of the thermopower.

Journal Article↗

PubMed2004

Band-structure modulation in carbon nanotube T junctions.

We show that the band structure of metallic carbon nanotubes can be dramatically altered by the local electrostatic field. This is realized by coupling chemically functionalized nanotubes to form T junctions. The bar of the T is the conducting channel and the leg of the T is used for local gating. Transport measurements reveal that an energy gap develops upon application of a local electric field in both devices with or without linker molecules at the junction. We propose that the mechanism of the band gap modulation in the T junctions without linker molecules is the field effect, with the linker molecules introducing additional electromechanical and chemical effects.

Journal Article↗

PubMed2003

V2O5 nanofibre sheet actuators.

Vanadium oxides, such as V2O5, are promising for lithium-ion batteries, catalysis, electrochromic devices and sensors. Vanadium oxides were proposed more than a decade ago for another redox-dependent application: the direct conversion of electrical energy to mechanical energy in actuators (artificial muscles). Although related conducting polymer and carbon nanotube actuators have been demonstrated, electromechanical actuators based on vanadium oxides have not be realized. V2O5 nanofibres and nanotubes provide the potential advantages of low-cost synthesis by sol-gel routes and high charging capacity and long cycle life. Here, we demonstrate electromechanical actuation for obtained high modulus V2O5 sheets comprising entangled V2O5 nanofibres. The high surface area of these V2O5 sheets facilitates electrochemical charge injection and intercalation that causes the electromechanical actuation. We show that the V2O5 sheets provide high Young's modulus, high actuator-generated stress, and high actuator stroke at low applied voltage.

Journal Article↗