Biomedical subjects

Simon J T Pollard

Publications and source records attributed to Simon J T Pollard.

7 recordsLinked to original sources

PubMed2006

A commentary on recent water safety initiatives in the context of water utility risk management.

Over the last decade, suppliers of drinking water have recognised the limitations of relying solely on end-product monitoring to ensure safe water quality and have sought to reinforce their approach by adopting preventative strategies where risks are proactively identified, assessed and managed. This is leading to the development of water safety plans; structured 'route maps' for managing risks to water supply, from catchment to consumer taps. This paper reviews the Hazard Analysis and Critical Control Point (HACCP) procedure on which many water safety plans are based and considers its appropriateness in the context of drinking water risk management. We examine water safety plans in a broad context, looking at a variety of monitoring, optimisation and risk management initiatives that can be taken to improve drinking water safety. These are cross-compared using a simple framework that facilitates an integrated approach to water safety. Finally, we look at how risk management practices are being integrated across water companies and how this is likely to affect the future development of water safety plans.

Animals↗

PubMed2006

Risk management for assuring safe drinking water.

Millions of people die every year around the world from diarrheal diseases much of which is caused by contaminated drinking water. By contrast, drinking water safety is largely taken for granted by many citizens of affluent nations. The ability to drink water that is delivered into households without fear of becoming ill may be one of the key defining characteristics of developed nations in relation to the majority of the world. Yet there is well-documented evidence that disease outbreaks remain a risk that could be better managed and prevented even in affluent nations. A detailed retrospective analysis of more than 70 case studies of disease outbreaks in 15 affluent nations over the past 30 years provides the basis for much of our discussion [Hrudey, S.E. and Hrudey, E.J. Safe Drinking Water--Lessons from Recent Outbreaks in Affluent Nations. London, UK: IWA Publishing; 2004.]. The insights provided can assist in developing a better understanding within the water industry of the causes of drinking water disease outbreaks, so that more effective preventive measures can be adopted by water systems that are vulnerable. This preventive feature lies at the core of risk management for the provision of safe drinking water.

Animals↗

PubMed2006

Evaluating fugacity models for trace components in landfill gas.

A fugacity approach was evaluated to reconcile loadings of vinyl chloride (chloroethene), benzene, 1,3-butadiene and trichloroethylene in waste with concentrations observed in landfill gas monitoring studies. An evaluative environment derived from fictitious but realistic properties such as volume, composition, and temperature, constructed with data from the Brogborough landfill (UK) test cells was used to test a fugacity approach to generating the source term for use in landfill gas risk assessment models (e.g. GasSim). SOILVE, a dynamic Level II model adapted here for landfills, showed greatest utility for benzene and 1,3-butadiene, modelled under anaerobic conditions over a 10 year simulation. Modelled concentrations of these components (95,300 microg m(-3); 43 microg m(-3)) fell within measured ranges observed in gas from landfills (24,300-180,000 microg m(-3); 20-70 microg m(-3)). This study highlights the need (i) for representative and time-referenced biotransformation data; (ii) to evaluate the partitioning characteristics of organic matter within waste systems and (iii) for a better understanding of the role that gas extraction rate (flux) plays in producing trace component concentrations in landfill gas.

Air Pollutants↗

PubMed2006

Identifying source correlation parameters for hydrocarbon wastes using compound-specific isotope analysis.

A preliminary evaluation of compound-specific isotope analysis (CSIA) as a novel, alternative method for identifying source correlation compounds in soils contaminated with residual heavy or weathered petroleum wastes is presented. Oil-contaminated soil microcosms were established using soil (sandy-loam, non-carbonaceous cley) amended with ballast-, crude- or No.6 fuel oil. Microcosms were periodically sampled over 256 days and delta(13)C values (which express the ratio of (13)C to (12)C) determined at each time point for five n-alkanes and the isoprenoid norpristane using gas chromatography-isotope ratio mass spectrometry (GC-IRMS). Although some temporal variation was observed, no significant temporal shifts in the delta(13)C values for the five n-alkanes were measured in all three oils. Isoprenoid isotope ratios (delta(13)C) appeared to be least affected by biotransformation, especially in the No.6 fuel oil. The research suggests that the delta(13)C of isoprenoids such as norpristane, may be of use as source correlation parameters.

Biodegradation, Environmental↗

PubMed2005

Spray irrigation of landfill leachate: estimating potential exposures to workers and bystanders using a modified air box model and generalised source term.

Generalised source term data from UK leachates and a probabilistic exposure model (BPRISC(4)) were used to evaluate key routes of exposure from chemicals of concern during the spraying irrigation of landfill leachate. Risk estimates secured using a modified air box model are reported for a hypothetical worker exposed to selected chemicals within a generalised conceptual exposure model of spray irrigation. Consistent with pesticide spray exposure studies, the key risk driver is dermal exposure to the more toxic components of leachate. Changes in spray droplet diameter (0.02-0.2 cm) and in spray flow rate (50-1000 l/min) have little influence on dermal exposure, although the lesser routes of aerosol ingestion and inhalation are markedly affected. The risk estimates modelled using this conservative worst case exposure scenario are not of sufficient magnitude to warrant major concerns about chemical risks to workers or bystanders from this practice in the general sense. However, the modelling made use of generic concentration data for only a limited number of potential landfill leachate contaminants, such that individual practices may require assessment on the basis of their own merits.

Aerosols↗

PubMed2004

Characterisation of weathered hydrocarbon wastes at contaminated sites by GC-simulated distillation and nitrous oxide chemical ionisation GC-MS, with implications for bioremediation.

An extended analytical characterisation of weathered hydrocarbons isolated from historically contaminated sites in Alberta is presented. The characterisation of soil extracts, chromatographically separated into component classes, by GC-simulated distillation and nitrous oxide (N2O) chemical ionisation (CI) GC-MS provides new insights into the composition of the residual oil at these sites, the principal partition medium for risk critical components. The combined polar and asphaltene content of representative soil extracts ranged from 40% w/w to 70% w/w of the oils encountered. An abundance of C14-C22 2-4 ring alicyclics, alkylbenzenes and benzocycloparaffins is prevalent within the saturate fractions of site soils. Implications for the partitioning of risk critical compounds at sites with weathered hydrocarbons and the practical application of bioremediation technologies are discussed.

Alberta↗

PubMed2004

Characterizing environmental harm: developments in an approach to strategic risk assessment and risk management.

Environmental policymakers and regulators are often in the position of having to prioritize their actions across a diverse range of environmental pressures to secure environmental protection and improvements. Information on environmental issues to inform this type of strategic analysis can be disparate; it may be too voluminous or even absent. Data on a range of issues are rarely presented in a common format that allows easy analysis and comparison. Nevertheless, judgments are required on the significance of various environmental pressures and on the inherent uncertainties to inform strategic assessments such as "state of the environment" reports. How can decisionmakers go about this type of strategic and comparative risk analysis? In an attempt to provide practical tools for the analysis of environmental risks at a strategic level, the Environment Agency of England and Wales has conducted a program of developmental research on strategic risk assessment since 1996. The tools developed under this program use the concept of "environmental harm" as a common metric, viewed from technical, social, and economic perspectives, to analyze impacts from a range of environmental pressures. Critical to an informed debate on the relative importance of these perspectives is an understanding and analysis of the various characteristics of harm (spatial and temporal extent, reversibility, latency, etc.) and of the social response to actual or potential environmental harm from a range of hazards. Recent developments in our approach, described herein, allow a presentation of the analysis in a structured fashion so as to better inform risk-management decisions.

Environment↗