PubMed Health⌕ Search

Biomedical subjects

Simon N Twigger

Publications and source records attributed to Simon N Twigger.

11 recordsLinked to original sources
PubMed2006

The Rat Genome Database, update 2007--easing the path from disease to data and back again.

The Rat Genome Database (RGD, http://rgd.mcw.edu) is one of the core resources for rat genomics and recent developments have focused on providing support for disease-based research using the rat model. Recognizing the importance of the rat as a disease model we have employed targeted curation strategies to curate genes, QTL and strain data for neurological and cardiovascular disease areas. This work has centered on rat but also includes data for mouse and human to create 'disease portals' that provide a unified view of the genes, QTL and strain models for these diseases across the three species. The disease curation efforts combined with normal curation activities have served to greatly increase the content of the database, particularly for biological information, including gene ontology, disease, pathway and phenotype ontology annotations. In addition to improving the features and database content, community outreach has been expanded to demonstrate how investigators can leverage the resources at RGD to facilitate their research and to elicit suggestions and needs for future developments. We have published a number of papers that provide additional information on the ontology annotations and the tools at RGD for data mining and analysis to better enable researchers to fully utilize the database.

Animals↗
PubMed2005

A new method for identifying informative genetic markers in selectively bred rats.

Microsatellite length polymorphisms are useful for the mapping of heritable traits in rats. Over 4000 such microsatellites have been characterized for 48 inbred rat strains and used successfully to map phenotypes that differ between strains. At present, however, it is difficult to use this microsatellite database for mapping phenotypes in selectively bred rats of unknown genotype derived from outbred populations because it is not immediately obvious which markers might differ between strains and be informative. We predicted that markers represented by many alleles among the known inbred rat strains would also be most likely to differ between selectively bred strains derived from outbred populations. Here we describe the development and successful application of a new genotyping tool (HUMMER) that assigns "heterozygosity" (Het) and "uncertainty" (Unc) scores to each microsatellite marker that corresponds to its degree of heterozygosity among the 48 genotyped inbred strains. We tested the efficiency of HUMMER on two rat strains that were selectively bred from an outbred Sprague-Dawley stock for either high or low activity in the forced swim test (SwHi rats and SwLo rats, respectively). We found that the markers with high Het and Unc scores allowed the efficient selection of markers that differed between SwHi and SwLo rats, while markers with low Het and Unc scores typically identified markers that did not differ between strains. Thus, picking markers based on Het and Unc scores is a valuable method for identifying informative microsatellite markers in selectively bred rodent strains derived from outbred populations.

Animals↗
PubMed2005

Tools and strategies for physiological genomics: the Rat Genome Database.

The broad goal of physiological genomics research is to link genes to their functions using appropriate experimental and computational techniques. Modern genomics experiments enable the generation of vast quantities of data, and interpretation of this data requires the integration of information derived from many diverse sources. Computational biology and bioinformatics offer the ability to manage and channel this information torrent. The Rat Genome Database (RGD; http://rgd.mcw.edu) has developed computational tools and strategies specifically supporting the goal of linking genes to their functional roles in rat and, using comparative genomics, to human and mouse. We present an overview of the database with a focus on these unique computational tools and describe strategies for the use of these resources in the area of physiological genomics.

Animals↗
PubMed2005

DeNovoID: a web-based tool for identifying peptides from sequence and mass tags deduced from de novo peptide sequencing by mass spectroscopy.

One of the core activities of high-throughput proteomics is the identification of peptides from mass spectra. Some peptides can be identified using spectral matching programs like Sequest or Mascot, but many spectra do not produce high quality database matches. De novo peptide sequencing is an approach to determine partial peptide sequences for some of the unidentified spectra. A drawback of de novo peptide sequencing is that it produces a series of ordered and disordered sequence tags and mass tags rather than a complete, non-degenerate peptide amino acid sequence. This incomplete data is difficult to use in conventional search programs such as BLAST or FASTA. DeNovoID is a program that has been specifically designed to use degenerate amino acid sequence and mass data derived from MS experiments to search a peptide database. Since the algorithm employed depends on the amino acid composition of the peptide and not its sequence, DeNovoID does not have to consider all possible sequences, but rather a smaller number of compositions consistent with a spectrum. DeNovoID also uses a geometric indexing scheme that reduces the number of calculations required to determine the best peptide match in the database. DeNovoID is available at http://proteomics.mcw.edu/denovoid.

Algorithms↗
PubMed2005

Simultaneous quantification and identification using 18O labeling with an ion trap mass spectrometer and the analysis software application "ZoomQuant".

Stable isotope labeling with (18)O is a promising technique for obtaining both qualitative and quantitative information from a single differential protein expression experiment. The small 4 Da mass shift produced by incorporation of two molecules of (18)O, and the lack of available methods for automated quantification of large data sets has limited the use of this approach with electrospray ionization-ion trap (ESI-IT) mass spectrometers. In this paper, we describe a method of acquiring ESI-IT mass spectrometric data that provides accurate calculation of relative ratios of peptides that have been differentially labeled using(18)O. The method utilizes zoom scans to provide high resolution data. This allows for accurate calculation of (18)O/(16)O ratios for peptides even when as much as 50% of a (18)O labeled peptide is present as the singly labeled species. The use of zoom scan data also provides sufficient resolution for calculating accurate ratios for peptides of +3 and lower charge states. Sequence coverage is comparable to that obtained with data acquisition modes that use only MS and MS/MS scans. We have employed a newly developed analysis software tool, ZoomQuant, which allows for the automated analysis of large data sets. We show that the combination of zoom scan data acquisition and analysis using ZoomQuant provides calculation of isotopic ratios accurate to approximately 21%. This compares well with data produced from (18)O labeling experiments using time of flight (TOF) and Fourier transform-ion cyclotron resonance (FT-ICR) MS instruments.

Amino Acid Sequence↗
PubMed2005

ZoomQuant: an application for the quantitation of stable isotope labeled peptides.

The main goal of comparative proteomics is the quantitation of the differences in abundance of many proteins between two different biological samples in a single experiment. By differentially labeling the peptides from the two samples and combining them in a single analysis, relative ratios of protein abundance can be accurately determined. Protease catalyzed (18)O exchange is a simple method to differentially label peptides, but the lack of robust software tools to analyze the data from mass spectra of (18)O labeled peptides generated by common ion trap mass spectrometers has been a limitation. ZoomQuant is a stand-alone computational tool that analyzes the mass spectra of (18)O labeled peptides from ion trap instruments and determines relative abundance ratios between two samples. Starting with a filtered list of candidate peptides that have been successfully identified by Sequest, ZoomQuant analyzes the isotopic forms of the peptides using high-resolution zoom scan spectrum data. The theoretical isotope distribution is determined from the peptide sequence and is used to deconvolute the peak areas associated with the unlabeled, partially labeled, and fully labeled species. The ratio between the labeled and unlabeled peptides is then calculated using several different methods. ZoomQuant's graphical user interface allows the user to view and adjust the parameters for peak calling and quantitation and select which peptides should contribute to the overall abundance ratio calculation. Finally, ZoomQuant generates a summary report of the relative abundance of the peptides identified in the two samples.

Animals↗
PubMed2004

ProMoST (Protein Modification Screening Tool): a web-based tool for mapping protein modifications on two-dimensional gels.

ProMoST is a flexible web tool that calculates the effect of single or multiple posttranslational modifications (PTMs) on protein isoelectric point (pI) and molecular weight and displays the calculated patterns as two-dimensional (2D) gel images. PTMs of proteins control many biological regulatory and signaling mechanisms and 2D gel electrophoresis is able to resolve many PTM-induced isoforms, such as those due to phosphorylation, acetylation, deamination, alkylation, cysteine oxidation or tyrosine nitration. These modifications cause changes in the pI of the protein by adding, removing or changing titratable groups. Proteins differ widely in buffering capacity and pI and therefore the same PTMs may give rise to quite different patterns of pI shifts in different proteins. It is impossible by visual inspection of a pattern of spots on a gel to determine which modifications are most likely to be present. The patterns of PTM shifts for different proteins can be calculated and are often quite distinctive. The theoretical gel images produced by ProMoST can be compared to the experimental 2D gel results to implicate probable PTMs and focus efforts on more detailed study of modified proteins. ProMoST has been implemented as cgi script in Perl available on a WWW server at http://proteomics.mcw.edu/promost.

Algorithms↗
PubMed2004

Of rats and men.

Explore the source record for details and available documents.

Animals↗
PubMed2004

Integrative genomics: in silico coupling of rat physiology and complex traits with mouse and human data.

Integration of the large variety of genome maps from several organisms provides the mechanism by which physiological knowledge obtained in model systems such as the rat can be projected onto the human genome to further the research on human disease. The release of the rat genome sequence provides new information for studies using the rat model and is a key reference against which existing and new rat physiological results can be aligned. Previously, we described comparative maps of the rat, mouse, and human based on EST sequence comparisons combined with radiation hybrid maps. Here, we use new data and introduce the Integrated Genomics Environment, an extensive database of curated and integrated maps, markers, and physiological results. These results are integrated by using VCMapview, a java-based map integration and visualization tool. This unique environment allows researchers to relate results from cytogenetic, genetic, and radiation hybrid studies to the genome sequence and compare regions of interest between human, mouse, and rat. Integrating rat physiology with mouse genetics and clinical results from human by using the respective genomes provides a novel route to capitalize on comparative genomics and the strengths of model organism biology.

Animals↗
PubMedDate not supplied

Peptide identification using peptide amino acid attribute vectors.

We describe the theoretical basis for a peptide identification method wherein peptides are represented as vectors based on their amino acid composition and grouped into clusters. Unknown peptides are identified by finding the database cluster and peptide entries with the shortest Euclidian distance. We demonstrate that the amino acid composition of peptides is virtually as informative as the sequence and allows rapid peptide identification more accurately than peptide mass alone.

Algorithms↗