Biomedical subjects
Sotaro Miyano
Publications and source records attributed to Sotaro Miyano.
Sulfinylcalix[4]arene-impregnated amberlite XAD-7 resin for the separation of niobium(V) from tantalum(V).
Amberlite XAD-7 resin was impregnated with p-tert-butylsulfinylcalix[4]arene. Niobium(V) was collected on the impregnated resin in yields of more than 90% around pH 5.4, whereas tantalum(V) was negligibly collected. The collected niobium(V) was desorbed with 9 M sulfuric acid nearly quantitatively, hence the separation of niobium(V) from tantalum(V) was successfully achieved.
Two-dimensional supramolecular arrangements of enantiomers and racemic modification of 1,1'-binaphthyl-2,2'-dicarboxylic acid.
Formation of adlayers of the optically active compound 1,1'-binaphthyl-2, 2'-dicarboxylic acid (BINAC) on iodine-modified Au (111) surfaces in perchloric acid was investigated by in situ scanning tunneling microscopy (STM). Highly ordered arrays formed on the surfaces via simple spontaneous adsorption from a solution of enantiomers or the racemic BINAC, in spite of the fact that BINAC has a three-dimensionally complex stereochemical structure. Adlayers of both enantiomers essentially shared the same enantiomorphous structure. Observed parameters of the rectangular unit cell lattice for arrays of both enantiomers of BINAC were a = 2.3 +/- 0.2 nm and b = 0.7 +/- 0.2 nm. On the other hand, racemic modification formed an entirely different adlayer, which consisted of an alternate alignment of the two enantiomers, with an oblique unit cell lattice with parameters of a = 1.2 +/- 0.2 nm, b = 0.8 +/- 0.1 nm, and 74 +/- 3 degrees . No domain composed of a single enantiomer was observed. The stronger hetero-intermolecular interactions of enantiomer couples led to the formation of an alternate arrangement in the array prepared by racemic modification.
Epimerization of diastereomeric alpha-amino nitriles to single stereoisomers in the solid state.
[reaction: see text] A diastereomeric mixture of the alpha-amino nitrile prepared by the Strecker reaction of benzaldehyde, (1S,2R)-1-aminoindan-2-ol, and cyanotrimethylsilane thermally epimerizes in the solid state to give a single diastereomer with an (S)-configuration at the alpha position to the nitrile moiety. This shows a sharp contrast to the reaction conducted in DMSO at room temperature, which gives a 1:1 mixture of (S)- and (R)-isomers. Several other alpha-amino nitriles also epimerize in the solid-state toward single diastereomers.
Preconcentration of copper, cadmium, and lead with a thiacalix[4]arenetetrasulfonate-loaded Sephadex A-25 anion-exchanger for graphite-furnace atomic-absorption spectrometry.
A rapid column-adsorption method has been developed for concentrating traces of copper, cadmium, and lead in water prior to their determinations by graphite-furnace atomic-absorption spectrometry. The adsorbent used was prepared by loading a strongly basic anion-exchanger QAE-Sephadex A-25 (50 mg) with thiacalix[4]arenetetrasulfonate (20 micromol). Two-hundredfold preconcentration of the analyte elements was achieved by passing 100 mL of sample solution (pH 8.0) through a column packed with the adsorbent (6 mm i.d. x 7 mm high) at a flow rate of 10 mL min(-1) and by the subsequent elution with 500 microL of aqueous nitric acid solution (1 mol L(-1)). The practical applicability of the proposed method was evaluated by analyzing certified reference seawater samples.
Octalanthanide wheels supported by p-tert-butylsulfonylcalix[4]arene.
Explore the source record for details and available documents.
Stereoselective dialkylation of the proximal hydroxy groups of calix- and thiacalix[4]arenes.
Treatment of p-tert-butylcalix[4]arene (C1) and its sulfur-bridged analog T1 with 1,3-dichloro-1,1,3,3-tetraisopropyldisiloxane in the presence of imidazole gives proximally O,O'-disiloxane-1,3-diyl-bridged calixarenes C2 and T2 in excellent yields, respectively. Subsequent base-catalyzed etherification of the remaining hydroxy groups with alkyl halides gives syn- and anti-O'',O'''-dialkylated products, the stereoselectivity of which varies depending on the nature of the macrocycle, as well as the metal cation of the base employed. Thus, conventional calixarene C2 preferentially affords syn compounds of 1,2-alternate conformation (C3) with the aid of tert-BuOK and K(2)CO(3) and anti counterparts of partial-cone conformation (C4) with Cs(2)CO(3). On the other hand, thiacalixarene T2 affords syn compounds of 1,2-alternate conformation (T3) with any of the bases. The disiloxanediyl bridge of the resulting products can readily be removed by treatment with tetrabutylammonium fluoride. Thus, the net process provides an efficient method for the regio- and stereoselective synthesis of proximally dialkylated calix[4]arenes.
Rapid metal ions shuttling through 1,3-alternate Thiacalix[4]crown tubes.
Several new thiacalix[4]monocrown and thiacalix[4]biscrown compounds were synthesized. Their metal ion extractabilities are found to be lower than those of conventional calix[4]crowns. By use of X-ray crystal structures and (1)H NMR spectroscopy, this result is explained by weaker electrostatic interactions of the polyether ring oxygen atoms with the metal ions and diminished pi-metal ion interactions between the metal ions and the aromatic rings of the thiacalix[4]crowns. Temperature-dependent (1)H NMR spectroscopic measurements reveal coalescence temperatures T(c)(intra) and T(c)(inter) for metal ion exchange. In one case, this exchange was rationalized as metal ion shuttling through a thiacalix[4]biscrown tube. Since the metal ions are less tightly complexed by the polyether units in thiacalix[4]biscrowns than in conventional calix[4]biscrowns, more facile metal ion exchange between the two polyether units takes place in the former.
Synthesis, resolution, and absolute stereochemistry of (-)-blestriarene C.
A naturally occurring 1,1'-biphenanthrene, blestriarene C (1), was prepared in 13 steps and 30% overall yield. The key steps are the ester-mediated nucleophilic aromatic substitution on 2,6-di-tert-butyl-4-methoxyphenyl 5-isopropoxy-2-methoxybenzoate (4) by 2-methoxy-4-methoxymethoxy-6-methylphenylmagnesium bromide (5) and a novel intramolecular cyclization of the resulting 4-isopropoxy-2'-methoxy-4'-methoxymethoxy-6'-methylbiphenyl-2-carboxylic ester 14 to 7-isopropoxy-4-methoxy-2-(methoxymethoxy)phenanthren-9-ol (15). The racemic blestriarene C was optically resolved by chiral HPLC on a preparative scale to give several 10-mg yields of both the enantiomers in up to 95% ee. The absolute stereochemistry was determined to be S(a)-(-) by the axial chirality recognition method, which was based on the stereospecific formation of a 12-membered cyclic diester containing two biaryl-o,o'-diyl unites joined by ester -CO(2)- linkages. The validity of the method was confirmed by an X-ray crystallographic analysis and ab initio conformational analyses of such 12-membered cyclic diesters. It was found that blestriarene C and its 7,7'-diisopropyl ether 2 underwent rapid photoracemization even under ambient light exposure.
Synthesis of all stereoisomers of sulfinylcalix[4]arenes.
All four stereoisomers of p-tert-butylsulfinylcalix[4]arene [4(rccc), 4(rcct), 4(rctt), and 4(rtct)], arising from the disposition of the four sulfinyl groups with respect to the mean plane of the four bridging sulfur atoms, have been prepared via oxidation of p-tert-butylthiacalix[4]arene (2) or its tetra-O-benzyl ethers 5 of defined conformations. Thus, treatment of 2 with 4.4 molar equiv of NaBO(3).4H(2)O gave the rtct and rctt isomers in 27% and 17% yields, respectively, while oxidation of cone 5 (5(C)) and partial cone 5 (5(PC)) proceeded stereoselectively to give, after debenzylation of the resulting tetrasulfoxides 12 and 15, the rccc and rcct isomers in 56% and 28% yields, respectively, based on 5. The sulfinylcalix[4]arenes 4 were treated with iodomethane in the presence of a base to give the corresponding tetramethyl ethers 16, the structures of which in regard to the disposition of the sulfinyl groups and the conformation of the phenol units were determined by X-ray crystallography. Also reported is the synthesis of all four conformational isomers of tetra-O-benzyl ether of 2 (5(C), 5(PC), 5(1,2-A), and 5(1,3-A)).
Inclusion behavior of water-soluble thiacalix- and calix[4]arenes towards substituted benzenes in aqueous solution.
Inclusion abilities of thiacalix- and calix[4]arenetetrasulfonate (3 and 4) towards mono-substituted benzenes were investigated in neutral aqueous solution. In general, the hosts regioselectively encapsulated the guests from the aromatic moiety except the complexation of toluene by 4, in which the guest penetrated from either the aromatic or the methyl group. Stabilities of the inclusion complexes increased with the electron-withdrawing ability of the substituent on the guest, suggesting pi-pi electronic interaction between the host and guest. In spite of the lower electron density of the aromatic ring, thiacalix[4]arene 3 showed higher inclusion ability than calix[4]arene 4, suggesting that the size rather than the electron density of the calix framework is a more important factor in determining the inclusion ability.
First determination of the absolute stereochemistry of a naturally occurring 1,1'-biphenanthrene, (--)-blestriarene C, and its unexpected photoracemization.
A naturally occurring 1,1'-biphenanthrene, blestriarene C, was prepared and its absolute stereochemistry was determined to be Sa-(-) by an empirical method, during which the compound was found to undergo rapid photoracemization even under ambient light exposure.
Synthesis, structure, and ferromagnetic behavior of decacopper(II) cluster complex supported by hexaanionic p-tert-butylthiacalix[6]arene.
A nanosized decacopper(II) cluster complex was synthesized using p-tert-butylthiacalix[6]arene as a ligand. In the complex, the calixarene assumes a "pinched cone" conformation and acts as an undecadentate ligand via six phenoxy oxygen and five sulfur atoms. The resulting pentacopper(II) subunits are connected by two hydroxo and two oxo groups to form decacappoer(II) cluster core. The core structure remains intact in alcoholic solution as shown by ESI MS. The temperature dependence of chimT clearly shows ferromagnetic behavior of the core due to orthogonality between two adjoining magnetic orbitals of copper(II) ions.
'Thiacalix[4]aniline' as a highly specific extractant for Au(III) and Pd(II) ions.
Thiacalix[4]aniline (4), a cyclic tetramer of p-tert-butylaniline bridged with four sulfides, extracted Au(III) and Pd(II) ions specifically from acidic solutions among 41 metal ions including soft metal ions such as Hg(II), Cd(II), Zn(II), Pb(II), and Cu(II).
Inclusion behavior of thiacalix[4]arenetetrasulfonate toward water-miscible organic molecules studied by salting-out and X-ray crystallography.
[reaction: see text] Inclusion ability of thiacalix[4]arenetetrasulfonate (TCAS) toward water-miscible organic molecules such as alcohols, ketones, cyclic ethers, and so on was studied by salting-out of the inclusion complex. NMR spectra of the recovered precipitates showed size selectivity to include the guest molecules. X-ray crystallographic analyses of TCAS salts including acetone and 1,4-dioxane suggested that guests are retained with the aid of cation coordination and H-bonding.