Biomedical subjects

Sridhar Krishnaswamy

Publications and source records attributed to Sridhar Krishnaswamy.

3 recordsLinked to original sources

PubMed2002

Photoacoustic probes for nondestructive testing and biomedical applications.

Fiber-optic photoacoustic sources for nondestructive testing and biomedical applications are described. The photoacoustic sources consist of a pulsed laser, a fiber-optic cable, and a generation head. The generation head is a miniature hermetically sealed chamber, which can be embedded into solid structures or immersed in liquid media. The face of the chamber acts as a target for laser irradiation. Bulk ultrasonic waves generated inside of the target are transmitted into the medium. The proposed systems offer wide ultrasonic range (0.5-15 MHz), easy control over directivity of the ultrasonic beam, high efficiency of generation, and the ability to operate in a harsh environment. Sources with different radiation patterns with respect to the optical axis of the fiber, such as normal, sideways, as well as focused, have been devised. We present a proof-of-concept experiment using these sources in combination with fiber-optic ultrasonic receivers.

Equipment Design↗

PubMed2002

Intrinsic fiber-optic ultrasonic sensor array using multiplexed two-wave mixing interferometry.

An intrinsic multiplexed laser interferometer is presented that allows for the simultaneous detection of acoustic waves by an array of fiber-optic sensors. The phase-modulated signals from each sensor are demodulated by use of an adaptive two-wave mixing setup. The light from each sensing fiber in the array is mixed with a reference beam in a single photorefractive crystal (PRC), and the output beams from the PRC are imaged onto separate photodetectors to create a multiplexed two-wave mixing (MTWM) system. The sensing fibers are embedded in graphite-epoxy composite panels, and detection of both acoustic emission and ultrasonic signals in these materials is demonstrated. The intrinsic MTWM system is an effective tool for the simultaneous demodulation of signals from a large fiber sensor array. Also, the adaptive nature of the MTWM setup obviates the need for active stabilization against ambient noise.

Journal Article↗

PubMed2002

Mass spring lattice modeling of the scanning laser source technique.

The scanning laser source (SLS) technique is a promising new laser ultrasonic tool for the detection of small surface-breaking defects. The SLS approach is based on monitoring the changes in laser generated ultrasound as a laser source is scanned over a defect. Changes in amplitude and frequency content have been observed for ultrasound generated by the laser over uniform and defective areas. In this paper, the SLS technique is simulated numerically using the mass spring lattice model. Thermoelastic laser generation of ultrasound in an elastic material is modeled using a shear dipole distribution. The spatial and temporal energy distribution profiles of typical pulsed laser sources are used to model the laser source. The amplitude and spectral variations in the laser generated ultrasound as the SLS scans over a large aluminum block containing a small surface-breaking crack are observed. The experimentally observed SLS amplitude and spectral signatures are shown to be captured very well by the model. In addition, the possibility of utilizing the SLS technique to size surface-breaking cracks that are sub-wavelength in depth is explored.

Aluminum↗