PubMed Health⌕ Search

Biomedical subjects

Sriram Subramaniam

Publications and source records attributed to Sriram Subramaniam.

12 recordsLinked to original sources

Structure and transport mechanism of the bacterial oxalate transporter OxlT.

Membrane proteins that belong to the major facilitator superfamily (MFS) are found in organisms across the evolutionary spectrum and mediate the transport of a variety of substrates ranging from small metabolites to neurotransmitters. The oxalate transporter (OxlT) is a representative MFS protein, and exchanges formate for oxalate across the cytoplasmic membrane of the organism Oxalobacter formigenes. Here, we present a structural model for the protein conformational changes that occur during oxalate transport by combining a three-dimensional map of the oxalate-bound, "closed" state of OxlT at 6.5 A determined by cryo-electron microscopy with a model of the "open" state of OxlT based on the atomic structures of the related transporters, glycerol-3-phosphate transporter (GlpT) and lactose permease (LacY). We demonstrate that the principal structural change associated with substrate transport is a concerted rocking movement of the two structurally similar halves of the protein relative to each other. Our structural model places two positively charged residues, Arg-272 and Lys-355 in the central cavity, suggesting that electrostatic interactions between these residues and the oxalate anion is a key step in generating the conformational change between the open and closed states of the transporter.

Amino Acid Sequence↗

Three-dimensional electron microscopic imaging of membrane invaginations in Escherichia coli overproducing the chemotaxis receptor Tsr.

Electron tomography is a powerful method for determining the three-dimensional structures of large macromolecular assemblies, such as cells, organelles, and multiprotein complexes, when crystallographic averaging methods are not applicable. Here we used electron tomographic imaging to determine the molecular architecture of Escherichia coli cells engineered to overproduce the bacterial chemotaxis receptor Tsr. Tomograms constructed from fixed, cryosectioned cells revealed that overproduction of Tsr led to formation of an extended internal membrane network composed of stacks and extended tubular structures. We present an interpretation of the tomogram in terms of the packing arrangement of Tsr using constraints derived from previous X-ray and electron-crystallographic studies of receptor clusters. Our results imply that the interaction between the cytoplasmic ends of Tsr is likely to stabilize the presence of the membrane networks in cells overproducing Tsr. We propose that membrane invaginations that are potentially capable of supporting axial interactions between receptor clusters in apposing membranes could also be present in wild-type E. coli and that such receptor aggregates could play an important role in signal transduction during bacterial chemotaxis.

Bacterial Proteins↗

Three-dimensional electron microscopy at molecular resolution.

Emerging methods in cryo-electron microscopy allow determination of the three-dimensional architectures of objects ranging in size from small proteins to large eukaryotic cells, spanning a size range of more than 12 orders of magnitude. Advances in determining structures by "single particle" microscopy and by "electron tomography" provide exciting opportunities to describe the structures of subcellular assemblies that are either too large or too heterogeneous to be investigated by conventional crystallographic methods. Here, we review selected aspects of progress in structure determination by cryo-electron microscopy at molecular resolution, with a particular emphasis on topics at the interface of single particle and tomographic approaches. The rapid pace of development in this field suggests that comprehensive descriptions of the structures of whole cells and organelles in terms of the spatial arrangements of their molecular components may soon become routine.

Cryoelectron Microscopy↗

Structural insights into the mechanism of proton pumping by bacteriorhodopsin.

For over three decades, bacteriorhodopsin has served as a paradigm for the study of the mechanisms underlying ion pumping across biological membranes. It is perhaps among the simplest known ion pumps, which functions by converting light energy into an electrochemical gradient by pumping protons out of the cytoplasm. The combination of spectroscopic, biochemical and crystallographic studies on bacteriorhodopsin provides a unique opportunity to dissect the principal elements underlying the mechanism of transmembrane proton transport. Here, we provide a brief review of recent developments related to the determination of the structural changes during proton transport using crystallographic approaches. Taken together with previous spectroscopic and biochemical investigations, these studies allow the description of a detailed molecular mechanism of the main steps in vectorial proton transport by bacteriorhodopsin.

Bacteriorhodopsins↗

Projection structure of the bacterial oxalate transporter OxlT at 3.4A resolution.

OxlT is a bacterial transporter protein with 12 transmembrane segments that belongs to the Major Facilitator Superfamily of transporters. It facilitates the exchange of oxalate and formate across the membrane of the Gram-negative bacterium Oxalobacter formigenes. From an electron crystallographic analysis of two-dimensional, tube-like crystals of OxlT, we have previously determined the three-dimensional structure of this transporter at 6.5 A resolution. Here, we report conditions to obtain crystalline, two-dimensional sheets of OxlT with diameters exceeding 2 microm. Images of the crystalline sheets were recorded at liquid nitrogen temperatures on a transmission electron microscope equipped with a field-emission gun, operated at 300 kV. Computed optical diffraction patterns from the best images display measurable reflections to about 3.4A, and electron diffraction patterns show spots to about 3.2 A resolution in the best cases. As in the case of the tube-like crystals, the new crystalline sheets also belong to the p22(1)2(1) symmetry group. However, the unit cell dimensions of 102.7A x 67.3 A are significantly smaller in one direction than those previously observed with the tube-like crystals that display unit cell dimensions of 100.3A x 79.0 A. Different regions of OxlT are involved in intermolecular contacts in the two types of crystals, and the improved resolution of the sheet crystals appears to be mainly attributable to this tighter packing of the monomers within the unit cell.

Bacterial Proteins↗

A core-weighted fitting method for docking atomic structures into low-resolution maps: application to cryo-electron microscopy.

Cryo-electron microscopy of "single particles" is a powerful method to analyze structures of large macromolecular assemblies that are not amenable to investigation by traditional X-ray crystallographic methods. A key step in these studies is to obtain atomic interpretations of multiprotein complexes by fitting atomic structures of individual components into maps obtained from electron microscopic data. Here, we report the use of a "core-weighting" method, combined with a grid-threading Monte Carlo (GTMC) approach for this purpose. The "core" of an individual structure is defined to represent the part where the density distribution is least likely to be altered by other components that comprise the macromolecular assembly of interest. The performance of the method has been evaluated by its ability to determine the correct fit of (i) the alpha-chain of the T-cell receptor variable domain into a simulated map of the alphabeta complex at resolutions between 5 and 40 A, and (ii) the E2 catalytic domain of the pyruvate dehydrogenase into an experimentally determined map, at 14 A resolution, of the icosahedral complex formed by 60 copies of this enzyme. Using the X-ray structures of the two test cases as references, we demonstrate that, in contrast to more traditional methods, the combination of the core-weighting method and the grid-threading Monte Carlo approach can identify the correct fit reliably and rapidly from the low-resolution maps that are typical of structures determined with the use of single-particle electron microscopy.

Animals↗

Automated image acquisition and processing using a new generation of 4K x 4K CCD cameras for cryo electron microscopic studies of macromolecular assemblies.

We have previously reported the development of AutoEM, a software package for semi-automated acquisition of data from a transmission electron microscope. In continuing efforts to improve the speed of structure determination of macromolecular assemblies by electron microscopy, we report here on the performance of a new generation of 4 K CCD cameras for use in cryo electron microscopic applications. We demonstrate that at 120 kV, and at a nominal magnification of 67000 x, power spectra and signal-to-noise ratios for the new 4 K CCD camera are comparable to values obtained for film images scanned using a Zeiss scanner to resolutions as high as approximately 1/6.5A(-1). The specimen area imaged for each exposure on the 4 K CCD is about one-third of the area that can be recorded with a similar exposure on film. The CCD camera also serves the purpose of recording images at low magnification from the center of the hole to measure the thickness of vitrified ice in the hole. The performance of the camera is satisfactory under the low-dose conditions used in cryo electron microscopy, as demonstrated here by the determination of a three-dimensional map at 15 A for the catalytic core of the 1.8 MDa Bacillus stearothermophilus icosahedral pyruvate dehydrogenase complex, and its comparison with the previously reported atomic model for this complex obtained by X-ray crystallography.

Automation↗

Electron microscopic analysis of membrane assemblies formed by the bacterial chemotaxis receptor Tsr.

The serine receptor (Tsr) from Escherichia coli is representative of a large family of transmembrane receptor proteins that mediate bacterial chemotaxis by influencing cell motility through signal transduction pathways. Tsr and other chemotaxis receptors form patches in the inner membrane that are often localized at the poles of the bacteria. In an effort to understand the structural constraints that dictate the packing of receptors in the plane of the membrane, we have used electron microscopy to examine ordered assemblies of Tsr in membrane extracts isolated from cells engineered to overproduce the receptor. Three types of assemblies were observed: ring-like "micelles" with a radial arrangement of receptor subunits, two-dimensional crystalline arrays with approximate hexagonal symmetry, and "zippers," which are receptor bilayers that result from the antiparallel interdigitation of cytoplasmic domains. The registration among Tsr molecules in the micelle and zipper assemblies was sufficient for identification of the receptor domains and for determination of their contributions to the total receptor length. The overall result of this analysis is compatible with an atomic model of the receptor dimer that was constructed primarily from the X-ray crystal structures of the periplasmic and cytoplasmic domains. Significantly, the micelle and zipper structures were also observed in fixed, cryosectioned cells expressing the Tsr receptor at high abundance, suggesting that the modes of Tsr assembly found in vitro are relevant to the situation in the cell.

Bacterial Proteins↗

Structural model for 12-helix transporters belonging to the major facilitator superfamily.

The major facilitator superfamily includes a large collection of evolutionarily related proteins that have been implicated in the transport of a variety of solutes and metabolites across the membranes of organisms ranging from bacteria to humans. We have recently reported the three-dimensional structure, at 6.5 A resolution, of the oxalate transporter, OxlT, a representative member of this superfamily. In the oxalate-bound state, 12 helices surround a central cavity to form a remarkably symmetrical structure that displays a well-defined pseudo twofold axis perpendicular to the plane of the membrane as well as two less pronounced, mutually perpendicular pseudo twofold axes in the plane of the membrane. Here, we combined this structural information with sequence information from other members of this protein family to arrive at models for the arrangement of helices in this superfamily of transport proteins. Our analysis narrows down the number of helix arrangements from about a billion starting possibilities to a single probable model for the relative spatial arrangement for the 12 helices, consistent both with our structural findings and with the majority of previous biochemical studies on members of this superfamily.

Amino Acid Sequence↗

Molecular architecture and mechanism of an icosahedral pyruvate dehydrogenase complex: a multifunctional catalytic machine.

Electron cryo-microscopy of 'single particles' is a powerful method to determine the three-dimensional (3D) architectures of complex cellular assemblies. The pyruvate dehydrogenase multi-enzyme complex couples the activity of three component enzymes (E1, E2 and E3) in the oxidative decarboxylation of pyruvate to generate acetyl-CoA, linking glycolysis and the tricarboxylic acid cycle. We report here a 3D model for an 11 MDa, icosahedral pyruvate dehydrogenase sub-complex, obtained by combining a 28 A structure derived from electron cryo-microscopy with previously determined atomic coordinates of the individual E1 and E2 components. A key feature is that the E1 molecules are located on the periphery of the assembly in an orientation that allows each of the 60 mobile lipoyl domains tethered to the inner E2 core to access multiple E1 and E2 active sites from inside the icosahedral complex. This unexpected architecture provides a highly efficient mechanism for active site coupling and catalytic rate enhancement by the motion of the lipoyl domains in the restricted annular region between the inner core and outer shell of the complex.

Catalysis↗

From structure to mechanism: electron crystallographic studies of bacteriorhodopsin.

Bacteriorhodopsin is a protein found in cell membranes of the organism H. salinarum, where it functions as an efficient light-driven proton pump. Because bacteriorhodopsin is one of the simplest ion pumps known in biology, it has been the subject of intensive investigations over the last three decades, using methods spanning the range from femtosecond spectroscopy and crystallography to biochemistry and molecular biology. Here, we focus on the structural basis for the function of this protein, with primary emphasis on the contributions of electron microscopy and crystallography towards unravelling the mechanism of vectorial proton pumping.

Bacteriorhodopsins↗

Three-dimensional structure of a bacterial oxalate transporter.

The major facilitator superfamily (MFS) represents one of the largest classes of evolutionarily related membrane transporter proteins. Here we present the three-dimensional structure at 6.5 A resolution of a bacterial member of this superfamily, OxlT. The structure, derived from an electron crystallographic analysis of two-dimensional crystals, reveals that the 12 helices in the OxlT molecule are arranged around a central cavity, which is widest at the center of the membrane. The helices divide naturally into three groups: a peripheral set comprising helices 3, 6, 9 and 12; a second set comprising helices 2, 5, 8 and 11 that faces the central substrate transport pathway across most of the length of the membrane; and a third set comprising helices 1, 4, 7 and 10 that participate in the pathway either on the cytoplasmic side (4 and 10) or on the periplasmic side (1 and 7). Overall, the architecture of the protein is remarkably symmetric, providing a compelling molecular explanation for the ability of such transporters to carry out bi-directional substrate transport.

Bacterial Proteins↗