PubMed Health⌕ Search

Biomedical subjects

Stéphane Torelli

Publications and source records attributed to Stéphane Torelli.

11 recordsLinked to original sources
PubMed2006

Multifrequency EPR and redox reactivity investigations of a bis(mu-thiolato)-dicopper(II,II) complex.

From a new tripodal ligand [N2SS'H] with mixed N, S(thioether), and S(thiolate) donor set, the corresponding bis(mu-thiolato)dicopper(II) complex has been prepared and characterized. X-ray crystallographic analysis of the complex [Cu2(N2SS')2](ClO4)2.C4H10O (1) demonstrates that the two five-coordinated Cu atoms are bridged by two thiolates leading to a nearly planar Cu2S2 core with a Cu1...Cu1* distance of 3.418(8) A and a large bridging angle Cu1S1Cu1* of 94.92 degrees. X-band (10 GHz), Q-band (34 GHz), and F-Band (115 GHz) EPR spectra of 1 are consistent with a weakly coupled dicopper(II,II) center attributed to an S = 1 state. Simulations for the three frequencies are obtained with a unique set of electronic parameters. The mean values of the spin Hamiltonian parameters for 1 are D = 0.210(3) cm(-1), E = 0.0295(5) cm(-1), |E/D| = 0.140, gx = 2.030(2), gy = 2.032(2), gz = 2.128(2). The electrochemical one-electron reduction of 1 generates the mixed-valent CuIICuI species. EPR and UV-vis spectra are consistent with a type I localized mixed-valent species, while dinuclear CuA centers of native cytochrome c oxidase (CcO)1-3 or nitrous oxide reductase (N2OR)4 have a delocalized CuIICuI mixed-valent state. After reoxidation of the CuIICuI species, the initial complex 1 is regenerated through a reversible interconversion process.

Catalysis↗
PubMed2006

Structural, thermodynamic, and mesomorphic consequences of replacing nitrates with trifluoroacetate counteranions in ternary lanthanide complexes with hexacatenar tridentate ligands.

The promesogenic hexacatenar tridentate ligands L3(Cn) (I shape) and L4(Cn) (V shape) react with trivalent lanthanide trifluoroacetates, Ln((CF3CO2)3, to give either monometallic [Ln(Li(Cn))(CF3CO2)3] or trifluoroacetato-bridged bimetallic [Ln(Li(Cn))(CF3CO2)3]2 complexes in the solid state, as exemplified by the crystal structures of [Lu(L4(CO))(CF3CO2)3(H2O)], [Lu(L4(CO))(CF3CO2)3]2, and [La(L3(C4))(CF3CO2)3]2. Although the dimerization process is influenced by the competiting complexation of anions or solvent molecules, the coordination of CF3CO2- instead of NO3- to Ln(III) produces a significant lengthening of the Ln-N(ligand) bond distances. This translates into a considerable decrease of the affinity of the Li(C12) (i = 3, 4) ligands for Ln(CF3CO2)3 in solution, thus leading to significant dissociation of the [Ln(Li(C12))(CF3CO2)3] complexes at millimolar concentrations. The thermal properties of these complexes also suffer from their limited thermodynamic stability, and the thermotropic liquid crystalline phases produced at high temperatures reflect mixtures of different species. However, a hexagonal columnar organization characterizes the main component in the mesophases obtained with [Ln(L3(C12))(CF3CO2)3] at high temperature. A tentative interpretation of the small-angle X-ray scattering (SAXS) profiles suggests that disklike dimers of [Ln(L3(C12))(CF3CO2)3]2 are packed along the columnar axes. For [Ln(L4(C12))(CF3CO2)3], SAXS profiles are compatible with a lamellar organization in the mesophases originating from the existence of rodlike dimers of [Ln(L4(C12))(CF3CO2)3]2 as the major component in the liquid-crystal state.

Journal Article↗
PubMed2006

Design of iron chelators: syntheses and iron (III) complexing abilities of tripodal tris-bidentate ligands.

The interest in synthetic siderophore mimics includes therapeutic applications (iron chelation therapy), the design of more effective agents to deliver Fe to plants and the development of new chemical tools in order to study iron metabolism and iron assimilation processes in living systems. The design of ligands needs a rational approach for the understanding of the metal ion complexing abilities. The octahedral arrangement of donor atoms is the most favourable geometry, allowing the maximum possible distance between their formal or partial negative charges. Hexadentate chelators, usually of the tris-bidentate type, can accommodate the metal coordination sphere and are well-suited to obtain high pFe values. The first part of this review is dedicated to selected synthetic routes, taking into account (i) the nature of the chelating subunits, connecting groups and spacers, (ii) the water-solubility and hydrophilic/lipophilic balance, (iii) the chirality and (iv) the possibility of grafting probes or vectors. In the second part, we discuss the role of the molecular design on complexing abilities (thermodynamics and kinetics). The bidentate 8-hydroxyquinoline moiety offers an alternative to the usual coordinating hydroxamic acids, catechols and/or alpha-hydroxycarboxylic acids groups encountered in natural siderophores. The promizing results obtained with the tris-hydroxyquinoline-based ligand O-TRENSOX are summarized. O-TRENSOX exhibits a high and selective affinity for Fe(III) complexation. Its efficiency in delivering Fe to plants, iron mobilization, cell protection, and antiproliferative effects has been evidenced. Other chelators derived from O-TRENSOX (mixed catechol/8-hydroxyquinoline ligands, lipophilic ligands) are also described. Some results question the relevance of partition coefficients to foresee the activity of iron chelators. The development of probes (fluorescent, radioactive, spin labelled) based on the O-TRENSOX backbone is in progress in order to get insights in the complicated iron metabolism processes.

Drug Design↗
PubMed2005

Tuning the decay time of lanthanide-based near infrared luminescence from micro- to milliseconds through d-->f energy transfer in discrete heterobimetallic complexes.

Inert and optically active pseudo-octahedral Cr(III)N6 and Ru(II)N6 chromophores have been incorporated by self-assembly into heterobimetallic triple-stranded helicates HHH-[CrLnL3]6+ and HHH-[RuLnL3]5+. The crystal structures of [CrLnL(3)](CF(3)SO(3))(6) (Ln=Nd, Eu, Yb, Lu) and [RuLnL3](CF3SO3)5 (Ln=Eu, Lu) demonstrate that the helical structure can accommodate metal ions of different sizes, without sizeable change in the intermetallic MLn distances. These systems are ideally suited for unravelling the molecular factors affecting the intermetallic nd-->4f communication. Visible irradiation of the Cr(III)N6 and Ru(II)N6 chromophores in HHH-[MLnL3]5/6+ (Ln=Nd, Yb, Er; M=Cr, Ru) eventually produces lanthanide-based near infrared (NIR) emission, after directional energy migration within the complexes. Depending on the kinetic regime associated with each specific d-f pair, the NIR luminescence decay times can be tuned from micro- to milliseconds. The origin of this effect, together with its rational control for programming optical functions in discrete heterobimetallic entities, are discussed.

Amides↗
PubMed2005

Molecular control of macroscopic cubic, columnar, and lamellar organizations in luminescent lanthanide-containing thermotropic liquid crystals.

The connection of lipophilic gallic acid derivatives at the 5,5'- or 6,6'-positions of the rigid 2,6-bis(1-ethyl-benzimidazol-2-yl)pyridine core provides two pro-mesogenic tridentate ligands L10 and L12, whose molecular shapes, anisometries, and directional intermolecular pi-stacking can be tuned. X-ray diffraction data in the crystalline state, combined with solution 1H NMR measurements, show that complexation with trivalent lanthanides, Ln(III), produces the neutral hemi-disklike complexes [Ln(Li)(NO3)3] (i = 10, 12), which dimerize to give the rodlike bimetallic complexes [Ln2(Li)2(NO3)6] at lower temperature. The relevant thermodynamic parameters for the latter process depend on the nature of the ligand, the size of the metal ion, and the strength of the intermolecular interactions involved in the condensed phase. These three-dimensional models obtained for the complexes in the crystals and in solution are eventually confronted with small-angle XRD profiles recorded in the intermediate thermotropic liquid crystalline phase, in which the rigidity of the packed polyaromatic cores is maintained, while the alkyl chains are molten. According to the specific geometries and nuclearities of the molecular complexes, three types of mesophases (lamellar, columnar, and cubic) can be induced, which provides a direct correlation between the microscopic arrangements and the macroscopic ordering in lanthanide-containing metallomesogens.

Journal Article↗
PubMed2005

Dioxygen binding to complexes with Fe(II)2(mu-OH)2 cores: steric control of activation barriers and O2-adduct formation.

A series of complexes with [Fe(II)(2)(mu-OH)(2)] cores has been synthesized with N3 and N4 ligands and structurally characterized to serve as models for nonheme diiron(II) sites in enzymes that bind and activate O(2). These complexes react with O(2) in solution via bimolecular rate-limiting steps that differ in rate by 10(3)-fold, depending on ligand denticity and steric hindrance near the diiron center. Low-temperature trapping of a (mu-oxo)(mu-1,2-peroxo)diiron(III) intermediate after O(2) binding requires sufficient steric hindrance around the diiron center and the loss of a proton (presumably that of a hydroxo bridge or a yet unobserved hydroperoxo intermediate). The relative stability of these and other (mu-1,2-peroxo)diiron(III) intermediates suggests that these species may not be on the direct pathway for dioxygen activation.

Crystallography, X-Ray↗
PubMed2004

Structural insights into nonheme alkylperoxoiron(III) and oxoiron(IV) intermediates by X-ray absorption spectroscopy.

Transient mononuclear low-spin alkylperoxoiron(III) and oxoiron(IV) complexes that are relevant to the activation of dioxygen by nonheme iron enzymes have been generated from synthetic iron(II) complexes of neutral tetradentate (TPA) and pentadentate (N4Py, Bn-TPEN) ligands and structurally characterized by means of Fe K-edge X-ray absorption spectroscopy (XAS). Notable features obtained from fits of the EXAFS region are Fe-O bond lengths of 1.78 A for the alkylperoxoiron(III) intermediates and 1.65-1.68 A for the oxoiron(IV) intermediates, reflecting different strengths in the Fe-O pi interactions. These differences are also observed in the intensities of the 1s-to-3d transitions in the XANES region, which increase from 4 units for the nearly octahedral iron(II) precursor to 9-15 units for the alkylperoxoiron(III) intermediates to 25-29 units for the oxoiron(IV) species.

Biomimetic Materials↗
PubMed2004

Ruthenium(II) as a novel "labile" partner in thermodynamic self-assembly of heterobimetallic d-f triple-stranded helicates.

Unsymmetrical substituted bidentate benzimidazol-2-ylpyridine ligands L2 and L3 react with [Ru(dmso)(4)Cl(2)] in ethanol to give statistical 1:3 mixtures of fac-[Ru(Li)(3)](2+) and mer-[Ru(Li)(3)](2+) (i=2, 3; DeltaGtheta(isomerisation)=-2.7 kJ mol(-1)). In more polar solvents (acetonitrile, methanol), the free energy of the facial<=>meridional isomerisation process favours mer-[Ru(Li)(3)](2+), which is the only isomer observed in solution at the equilibrium (DeltaGtheta(isomerisation)< or = -11.4 kJ mol(-1)). Since the latter process takes several days for [Ru(L2)(3)](2+), fac-[Ru(L2)(3)](2+) and mer-[Ru(L2)(3)](2+) have been separated by chromatography, but the 28-fold increase in velocity observed for [Ru(L3)(3)](2+) provides only mer-[Ru(L3)3](ClO(4))2 after chromatography (RuC(60)H(51)N(9)O(8)Cl(2), monoclinic, P2(1)/n, Z=4). The facial isomer can be stabilised when an appended tridentate binding unit, connected at the 5-position of the benzimidazol-2-ylpyridine unit in ligand L1, interacts with nine-coordinate lanthanides(III). The free energy of the facial<=>meridional isomerisation is reversed (DeltaGtheta(isomerisation)> or =11.4 kJ mol(-1)), and the Ru--N bonds are labile enough to allow the quantitative thermodynamic self-assembly of HHH-[RuLu(L1)(3)]5+ within hours ([RuLu(L1)3](CF(3)SO(3))(4.5)Cl(0.5)(CH(3)OH)(2.5): RuLuC(106)H(109)Cl(0.5)N(21)O(19)S(4.5)F(13.5), triclinic, P(-)1, Z=2). Electrochemical and photophysical studies show that the benzimidazol-2-ylpyridine units in L1-L3 display similar pi-acceptor properties to, but stronger pi-donor properties than, those found in 2,2'-bipyridine. This shifts the intraligand pi-->pi* and the MLCT transitions toward lower energies in the pseudo-octahedral [Ru(Li)(3)](2+) (i=2, 3) chromophores. The concomitant short lifetime of the (3)MLCT excited state points to efficient, thermally activated quenching via low-energy Ru-centred d-d states, a limitation which is partially overcome by mechanical coupling in HHH-[RuLu(L1)(3)]5+.

Journal Article↗
PubMed2003

Thermically and electrochemically induced isomerization of a (bis(ferrocene)-cyclam)copper(II) complex.

The new bis(ferrocene)-cyclam macrocycle 1,8-bis(ferrocenylmethyl)-1,4,8,11-tetraazacyclotetradecane, denoted L, has been synthesized. Two Cu(II) complexes with L have been isolated and characterized from X-ray structure determination and electrochemical studies. These two LCu(II) complexes correspond to the type I (ferrocenyl subunits in the same side of the cyclam plane) and type III (ferrocenyl subunits above and below the cyclam plane) isomers. The type I LCu(II) complex was synthesized from L and a Cu(2+) salt, while the type III isomer was obtained by oxidation in air or by comproportionation of the Cu(I) complex. The interconversion between type I and type III LCu(II) complexes is negligible in acetonitrile and slow in dimethyl sulfoxide but fast via an electrochemical reduction-reoxidation cycle. According to UV-vis and electrochemical characterizations, the type III isomer is thermodynamically more stable and the type I isomer is kinetically favored. A type III LNi(II) complex was also isolated and characterized by X-ray diffraction analysis and from electrochemical studies.

Journal Article↗
PubMed2002

Substrate binding in catechol oxidase activity: biomimetic approach.

A series of dicopper(II) complexes have been investigated as model systems for the catechol oxidase active site enzyme, regarding the binding of catechol substrate in the first step of the catalytic cycle. The [Cu(2)(L(R))(mu-OH)](ClO(4))(2) and [Cu(2)(L(R))(H(2)O)(2)](ClO(4))(3) complexes are based on the L(R) ligands (2,6-bis[(bis(2-pyridylmethyl)amino)methyl]-4-R-substituted phenol) with -R = -OCH(3), -CH(3), or -F. Binding studies of diphenol substrates were investigated using UV-vis and EPR spectroscopy, electrochemistry, and (19)F NMR (fluorinated derivatives). All the complexes are able to bind two ortho-diphenol substrates (tetrachlorocatechol and 3,5-di-tert-butylcatechol). Two successive fixation steps, respectively fast and slower, were evidenced for the mu-OH complexes (the bis(aqua) complexes are inactive in catalysis) by stopped-flow measurement and (19)F NMR. From the mu-OH species, the 1:1 complex/substrate adduct is the catalytically active form. In relation with the substrate specificity observed in the enzyme, different substrate/inhibitor combinations were also examined. These studies enabled us to propose that ortho-diphenol binds monodentately one copper(II) center with the concomitant cleavage of the OH bridge. This hydroxo ligand appears to be a key factor to achieve the complete deprotonation of the catechol, leading to a bridging catecholate.

Binding Sites↗