Biomedical subjects

Stefan Ulvenlund

Publications and source records attributed to Stefan Ulvenlund.

8 recordsLinked to original sources

PubMed2005

Interactions between charged polypeptides and nonionic surfactants.

The influence of molecular characteristics on the mutual interaction between peptides and nonionic surfactants has been investigated by studying the effects of surfactants on amphiphilic, random copolymers of alpha-L-amino acids containing lysine residues as the hydrophilic parts. The hydrophobic residues were either phenylalanine or tyrosine. The peptide-surfactant interactions were studied by means of circular dichroism spectroscopy and binding isotherms, as well as by 1D and 2D NMR. The binding of surfactant to the peptides was found to be a cooperative process, appearing at surfactant concentrations just below the critical micellar concentration. However, a certain degree of peptide hydrophobicity is necessary to obtain an interaction with nonionic surfactant. When this prerequisite is fulfilled, the peptide mainly interacts with self-assembled, micelle-like surfactant aggregates formed onto the peptide chain. Therefore, the peptide-surfactant complex is best described in terms of a necklace model, with the peptide interacting primarily with the palisade region of the micelles via its hydrophobic side chains. The interaction yields an increased amount of alpha-helix conformation in the peptide. Surfactants that combine small headgroups with a propensity to form small, nearly spherical micelles were shown to give the largest increase in alpha-helix content.

Ions↗

PubMed2005

Thermotropic phase behaviour of long-chain alkylmaltosides.

The thermotropic phase behaviour and phase structure of crystalline and non-crystalline n-tetradecyl-beta-D-maltoside (C14G2) and n-hexadecyl-beta-D-maltoside (C16G2) have been investigated by means of differential scanning calorimetry and X-ray techniques. Upon lyophilisation, both compounds form a solid, lamellar phase comprising disordered head groups and hexagonally packed alkyl chains that are suggested to be tilted and interdigitated. This ordered lamellar phase melts into a metastable lamellar liquid crystal, which re-crystallises to a high-temperature crystalline polymorph comprising interdigitated, non-tilted alkyl chains. Remarkably, the high-temperature polymorph of C14G2 has the same melting point as that of C16G2, namely 105 degrees C for both surfactants. A low-temperature polymorph of anhydrous C14G2 crystallises from water at room temperature, whereas the hemihydrate of C14G2 crystallises at 6 degrees C from water, or from chloroform containing trace water. X-ray data suggest both these crystalline modifications to comprise interdigitated and tilted alkyl chains.

Alkanes↗

PubMed2005

Solid-state phase behaviour of dodecylglycosides.

The solid-state phase behaviour of lyophilised n-dodecyl-beta-D-glucoside (beta-C(12)G(1)), n-dodecyl-beta-D-maltoside (beta-C(12)G(2)) and n-dodecyl-beta-D-maltotrioside (beta-C(12)G(3)) has been investigated by differential scanning calorimetry (DSC) and X-ray techniques. For beta-C(12)G(1), lyophilisation results in a formation of a crystalline anhydrate. The lamellar spacing (37 Angstroms) is consistent with an alkyl chain packing in which the chains are not interdigitated. At 80 degrees C, the material melts into a lamellar liquid crystal with a lamellar spacing of 32 Angstroms, which suggests that the non-interdigitated chain packing of the crystalline state is retained in the liquid crystal. In contrast, lyophilisation of beta-C(12)G(2) and beta-C(12)G(3) results in the formation of a glassy state, best described as a frozen version of the lamellar liquid crystal. For beta-C(12)G(2), the lamellar spacing in the glass and liquid crystal suggests interdigitation of the alkyl chains. The glass transition temperature was found to be 65 degrees C for beta-C(12)G(2) and 100 degrees C for beta-C(12)G(3), which compares favourably with the glass transition of the parent carbohydrates. A second crystalline modification of beta-C(12)G(1) was prepared by precipitation from an aqueous solution at temperatures below the Krafft point (38 degrees C). For this modification, the lamellar distance (24 Angstroms) is consistent with interdigitated alkyl chains. At 50 degrees C, the crystalline material melts into a liquid crystalline phase. The material also readily loses water and rapidly re-crystallises to the anhydrate. The amount of water lost upon drying is consistent with the idea that the material is a monohydrate of beta-C(12)G(1). The drying and re-crystallisation processes give rise to 'pre-transitions' in the DSC thermograms and illustrate the importance of careful control of water in any analysis of the phase behaviour of alkylglycosides.

Butanols↗

PubMed2005

Comparison of the helix-coil transition of a titrating polypeptide in aqueous solutions and at the air-water interface.

The transition from alpha-helix to random coil of the titrating polyamino acid co-poly-L-(lysine, phenylalanine), (p-(Lys,Phe)), has been investigated as a function of pH and ionic strength in aqueous solution and at the air-water interface by means of circular dichroism (CD) spectroscopy and the Langmuir surface film balance technique. The results strongly suggest that the helix-coil transition for peptides at the air-water interface can be determined by using the two-dimensional Flory exponent, nu, to express the pH dependent peptide surface conformation. The helix-coil titration curve of p-(Lys,Phe) shifts approximately 2.5 pH units towards lower pH at the air-water interface, as compared with the bulk solution. This finding is of relevance for the understanding of conformation and conformational changes of membrane-transporting and membrane penetrating peptides as well as for the use of peptides in molecular devices.

Air↗

PubMed2005

Effects of temperature, salt, and deuterium oxide on the self-aggregation of alkylglycosides in dilute solution. 2. n-Tetradecyl-beta-D-maltoside.

The effects of salt, temperature, and deuterium oxide on the self-aggregation of n-tetradecyl-beta-d-maltoside (C(14)G(2)) in dilute solution have been investigated by static light scattering, dynamic light scattering (DLS), small-angle neutron scattering (SANS), tensiometry, and capillary viscometry. SANS data show that the micelles can be described as relatively flexible polymer-like micelles with an elliptical cross section, at least at temperatures between 35 and 50 degrees C. The micelles grow in one dimension with increasing temperature and concentration. DLS and viscometry data suggest that the micelle size reaches a maximum at 60-70 degrees C. Comparison of DLS data in D(2)O and H(2)O shows that the micelles are larger in the former case. The effect of salt on the micelle size was found to follow the Hofmeister series. Thus, at constant salt concentration, the micelle size decreases according to the sequence SO(4)(2)(-) > Cl(-) > NO(3)(-) > I(-) > SCN(-), where I(-) and SCN(-) act as salting-in anions. From tensiometric data, it can be concluded that the temperature effects on micelle morphology do not correlate directly with those on unimer solubility. Rather, the temperature effect on the hydrocarbon chain conformation seems to be decisive for the micelle morphology. At constant temperature, on the other hand, the effect of salt and deuterium isotope is attributable to changes in effective headgroup area, including intermolecular interactions and water of hydration.

Alkylation↗

PubMed2005

Correlation between epithelial toxicity and surfactant structure as derived from the effects of polyethyleneoxide surfactants on caco-2 cell monolayers and pig nasal mucosa.

The cell toxic effects of nonionic surfactants were investigated by means of two in vitro models, namely pig nasal mucosa mounted in horizontal Ussing chambers, and Caco-2 cell monolayers. A series of homologous polyethyleneoxide (PEO) surfactants with a wide span in hydrophilic head-group size and hydrophobic chain lengths were screened for concentration-dependent effects on the transepithelial electrical resistance (TEER) and mannitol permeability across Caco-2 cell monolayers. Trends in effects on permeability in the presence of increasing surfactant concentration coincided with the effects seen on TEER. Correlation of surfactant molecular structure with cell toxicity showed the size of the PEO group to be a more critical parameter than the size of the hydrocarbon chain. More specifically, the presence of very long PEO groups (>30 EO units) were found to lead to a decrease in cell toxicity. Similar trends were observed in the studies of the effects of PEO surfactants on pig nasal mucosa mounted in horizontal Ussing chambers. However, the nasal mucosa was somewhat more tolerant towards high surfactant concentrations than the Caco-2 cells. The relation between surfactant molecular structure and cell toxic effects is discussed in terms of micellar surface adsorption and micellar solubilization. The effect of the surfactants on the solubility of budesonide was investigated at two different surfactant concentrations (0.01 and 1 mg/mL). At the lower concentration, the solubilizing capacity of all of the surfactants was marginal, and there was no correlation between solubilizing capacity and cmc. At the higher concentration, on the other hand, all surfactants substantially increased the solubility of budesonide. The C18 PEO-ester with 40 EO units in the head group was found to be an efficient micellar solubilizer for budesonide, without causing adverse effects on the Caco-2 cell monolayers.

Adrenergic beta-Antagonists↗

PubMed2004

Effects of temperature, salt, and deuterium oxide on the self-aggregation of alkylglycosides in dilute solution. 1. n-nonyl-beta-D-glucoside.

The influence of salt, temperature, and deuterium oxide on the self-aggregation of n-nonyl-beta-D-glucoside (beta-C9G1) in dilute solution has been investigated by static and dynamic light scattering, neutron scattering, and tensiometry. Scattering data show that the micelles can be described as relatively stiff, elongated structures with a circular cross section. With a decrease of temperature, the micelles grow in one dimension, which makes it surprising that the critical micelle concentration (cmc) shows a concomitant increase. On the other hand, substitution of D2O for H2O causes a large increase in micelle size at low temperatures, without any appreciable effect on cmc. With increasing temperature, the deuterium effect on the micelle size diminishes. The effects of salt on the micelle size and cmc were found to follow the Hofmeister series. Thus, at constant salt concentration, the micelle size decreased according to the sequence SO4(2-) > Cl- > Br- > NO3- > I- > SCN-, whereas the effect on cmc displays the opposite trend. Here, I- and SCN are salting-in anions. Similarly, the effects of cations decrease with increasing polarizability in the sequence Li+ > Na+ > K+ > Cs+. At high ionic strength, the systems separate into two micellar phases. The results imply that the size of beta-C9G1 micelles is extremely sensitive to changes in the headgroup size. More specifically, temperature and salt effects on effective headgroup size, including intermolecular interactions and water ofhydration, are suggested to be more decisive for the micelle morphology than the corresponding effects on unimer solubility.

Adsorption↗

PubMed1996

Structural and Quantum Chemical Study of Bi(5)(3+) and Isoelectronic Main-Group Metal Clusters. The Crystal Structure of Pentabismuth(3+) Tetrachlorogallate(III) Refined from X-ray Powder Diffraction Data and Synthetic Attempts on Its Antimony Analogue.

Pentabismuth(3+) tetrachlorogallate(III), (Bi(5)(3+))(GaCl(4)(-))(3), has been synthesized by reducing a BiCl(3)-GaCl(3) melt with bismuth metal and the crystal structure refined from X-ray (Cu Kalpha(1)) powder diffraction data. The structure was found to belong to space group R-3c, with the lattice parameters a = 11.871(2) Å and c = 30.101(3) Å (Z = 6). It is isostructural with the previously characterized Bi(5)(AlCl(4))(3). An attempt to synthesise the antimony analogue Sb(5)(GaCl(4))(3) by reducing a SbCl(3)-GaCl(3) mixture with gallium metal produced a black solid phase. The gallium content of this phase is consistent with the stoichiometry Sb(5)(GaCl(4))(3), and the Raman spectrum of the phase dissolved in SbCl(3)-GaCl(3) comprises strong, low-frequency bands attributable to Sb-Sb stretch vibrations in Sb(5)(3+) or another reduced antimony species. Quantum chemical analyses have been performed for the isoelectronic, trigonal pyramidal closo-clusters Sn(5)(2-), Sb(5)(3+), Tl(5)(7-), Pb(5)(2-), and Bi(5)(3+), both with extended Hückel (eH) and Hartree-Fock (HF) methods. The HF calculations were performed with and without corrections for the local electron-electron correlation using second-order Møller-Plesset perturbation theory (MP2). All theoretical results are compared and evaluted with respect to experimental cluster structures and vibrational frequencies. The results from the calculations agree well with available experimental data for the solid-state structures and vibrational spectra of these cluster ions, except for the Tl(5)(7-) ion. Isolated Tl(5)(7-) is suggested to be electronically unstable because of the high charge density. The Sb(5)(3+) cluster ion is indicated to be stable. According to the calculations, Sn(5)(2-) and Pb(5)(2-) may be described in terms of edge-localized bonds without substantial electron density between the equatorial atoms, whereas Sb(5)(3+) and Bi(5)(3+) have electron density evenly distributed over all M-M vectors. Furthermore, the theoretical results give no support for a D(3h) --> C(4v) fluxionality of these clusters.

Journal Article↗