Biomedical subjects

Stephanie T Lopina

Publications and source records attributed to Stephanie T Lopina.

7 recordsLinked to original sources

PubMed2006

In vitro enzymatic stability of dendritic peptides.

PEGylated polyamidoamine (PAMAM) dendrimers as drug carriers have been a topic of interest because of their biomedically favorable features, including minimal toxicity, reduced immunogenicity, and excellent solubility in aqueous and most organic solutions. A PEG shell on dendrimer surface may provide steric hindrance, known as stealth properties of PEG, to stabilize drug molecules to be delivered. In this article, the effects of PEG and coupling sequence of drug, PEG, and dendrimer in modulating the stability of delivered drug molecules were evaluated. N-succinyl-Ala-Ala-Pro-Phe-p-nitroanilide was chosen as a model peptide. Dendritic peptides, that is, peptide-dendrimer, peptide-PAMAM-PEG, and peptide-PEG-dendrimer, were constructed based on Starbursttrade mark G3.0 PAMAM dendrimer and characterized by (1)H-NMR spectroscopy. Hydrolysis of dendritic peptides was catalyzed by alpha-chymotrypsin in pH 7.4 PBS buffer containing 5% DMF (v/v) at room temperature. The enzymatic stability of dendritic peptides was peptide-PAMAM-PEG > peptide-PAMAM > free peptide > peptide-PEG-PAMAM. The ratio of PEG/peptide could be reduced for increasing peptide loading while maintaining the delivered peptides' relatively high enzymatic stability. The quantitative analysis of dendritic peptide/enzyme interactions provided the understandings of the molecular structure/stability relationships of dendrimer/drug for the design of an optimal PEGylated dendrimer-based drug-delivery system.

Biocompatible Materials↗

PubMed2005

Extended release of a novel antidepressant, venlafaxine, based on anionic polyamidoamine dendrimers and poly(ethylene glycol)-containing semi-interpenetrating networks.

The multiple daily administration of venlafaxine, a novel third-generation antidepressant, was reduced based on polyamidoamine and polyethylene glycol (PEG)-containing semi-interpenetrating network (IPN), respectively. Venlafaxine was covalently linked to water-soluble G2.5 anionic polyamidoamine dendrimer via a hydrolyzable ester bond. Semi-IPN hydrogels were prepared by crosslinking acrylamide in the presence of PEG, and venlafaxine with predetermined amounts was loaded in situ. Dendrimer-venlafaxine conjugate and semi-IPNs were characterized by proton nuclear magnetic resonance and Fourier transform infrared, respectively. The effect of PEG concentration and molecular weight was studied and discussed for an optimal controlled release.

Acrylamide↗

PubMed2004

Polyethylene glycol-polyamidoamine dendritic micelle as solubility enhancer and the effect of the length of polyethylene glycol arms on the solubility of pyrene in water.

Unimolecular dendritic micelles designed as solubility enhancers were obtained by coupling polyethylene glycol (PEG) to Starburst polyamidoamine (PAMAM) dendrimers. Micelles-750, -2000, and -5000 have a generation 3.0 dendrimer core (32 primary amine end groups) and PEG arms with molecular weights of 750, 2000, and 5000, respectively. The conjugate of dendrimer core and PEG was characterized by MALDI-TOF MS and 1H NMR. 1H NMR was also used to estimate the average number of PEG arms on each dendrimer molecule. A typical hydrophobic compound, pyrene, was sonicated in an excess amount together with micelles at 50 degrees C for 6 h to produce its saturated water solution. The change of the solubility of pyrene was monitored at 334 nm, its maximum adsorption wavelength, by UV-VIS spectra. Concentrated micelles tended to dissolve more pyrene. However, there is no obvious linear relationship between micelle type and the amount of pyrene entrapped within micelles. Micelle-2000 could solubilize more pyrene than micelle-750. It is hypothesized that micelle-5000 did not solubilize more pyrene than micelle-2000 because of the PEG shell disruption by adjacent interpenetration of individual micelles when PEG arm length increased.

Dendrites↗

PubMed2004

Modeling of drug release from polymeric delivery systems--a review.

Polymeric drug delivery platforms have been receiving increasing attention in the past decade. The pharmaceutical industry is evaluating modes of delivery for their prized therapeutics at every step of the design cycle. Not only can the drug delivery platform transport drug molecules effectively, it can also improve patient compliance, offer greater patient convenience, and extend product lifecycles as patents expire. A large number of successful drug delivery systems have been developed as a result of an almost arbitrary selection of constituents and configurations. However, the development of advanced drug delivery systems relies on a judicious and careful selection of components, configurations, and geometries, which can be facilitated through mathematical modeling of controlled release systems. Mathematical modeling aids in predicting the drug release rates and diffusion behavior from these systems by the solution of an appropriate model, thereby reducing the number of experiments needed. It also aids in understanding the physics of a particular drug transport phenomenon, thus facilitating the development of new pharmaceutical products. The objective of this article is to review the spectrum of mathematical models that have been developed to describe drug release from polymeric controlled release systems. The mathematical models presented in this article have been grouped under diffusion controlled systems, swelling controlled systems, and erosion controlled systems as proposed by Langer and Peppas. Simple empirical or semi-empirical models and complex mechanistic models that consider diffusion, swelling, and erosion processes simultaneously are presented.

Chemistry, Pharmaceutical↗

PubMed2003

Penicillin V-conjugated PEG-PAMAM star polymers.

Starburst PAMAM dendrimers are potential carriers for drug delivery due to their unique structure. Drug-delivery scaffolds were designed and built up based on the polyethylene glycolpolyamidoamine (PEG-PAMAM) star polymer. Penicillin V was used as a model carboxylic group containing drug to conjugate with full- and half-generation PAMAM dendrimers. G2.5 PAMAM (with 32 carboxylic groups on the surface) dendrimers and G3.0 (with 32 primary amine groups on the surface) were typically chosen. There are two strategies given in the paper where a drug carrying a carboxylic group (e.g. penicillin V) was coupled to star polymer via amide and ester bonds, respectively. FT-IR, UV-Vis and 1H-NMR were used to characterize the intermediates and drug-star polymer conjugates. A single-strain bacterium, Staphylococcus aureus, was grown up for penicillin-conjugated PEG-PAMAM (G3.0) star polymer activity test. The result verified the bioavailability of modified penicillin after the ester bond was cleaved.

Anti-Bacterial Agents↗

PubMed2003

Polyphosphates and other phosphorus-containing polymers for drug delivery applications.

Poly(phosphate ester)s, polyphosphonates, and polyphosphazenes are three classes of phosphorus-containing polymers that have received wide attention over the past decade for their utility in biomedicine and tissue engineering. These three families of polymers can lead to a number of subclasses of polymers with varied properties. Significant research in this area has led to niche polymers with morphologies ranging from viscous gels to amorphous microparticles for utility in drug delivery. Furthermore, the pentavalency of phosphorus offers the potential for covalent linking of the drug. The classes of polymers discussed in this review are being explored in human clinical trials for vaccine delivery as well as delivery of oncolytic and CNS therapeutics. More applications in the areas of DNA delivery and tissue engineering are also being explored.

Delayed-Action Preparations↗

PubMed2002

L-tyrosine-based backbone-modified poly(amino acids).

Tyrosine-based pseudo-peptide polymers, first introduced in 1987 by Kohn and Langer, have been identified for potential biomaterial applications. These materials combine the desired polypeptide properties of biocompatibility, biodegradability, non-toxicity, and non-immunogenicity with good processing properties including solubility, thermal stability, and moldability which arise from alternating non-amide bonds along the polymer backbone. This paper focuses on the analysis of two such polymers based on the natural amino acid L-tyrosine. Starting from L-tyrosine and its deaminated analogue, 3-(4-para-hydroxy)-phenylpropionic acid, a diphenolic structure containing an amide linkage, was synthesized following standard procedures of peptide synthesis. This diphenolic structure was then used as a monomer to synthesize a polyiminocarbonate using a cyanogen bromide-initiated reaction and a polycarbonate using a triphosgene-initiated reaction. The polyiminocarbonate has iminocarbonate linkages and the polycarbonate has carbonate linkages alternating with amide linkages in the respective polymer backbone. Analytical studies were performed regarding the feasibility of the reaction procedures, the physical properties of the polymers, and their degradation processes, to gain insight into the potential biomaterial applications of these polymers. These results independently reaffirm the studies published by Kohn et al. working on similar polymeric systems.

Biocompatible Materials↗