PubMed Health⌕ Search

Biomedical subjects

Stephen C Parker

Publications and source records attributed to Stephen C Parker.

14 recordsLinked to original sources

Molecular dynamics simulations of electrolyte solutions at the (100) goethite surface.

Molecular dynamics simulations of electrolyte solutions in contact with a neutral (100) goethite (alpha-FeOOH) surface were used to probe the structure of the mineral-water interface and gain insight into the adsorption properties of monovalent ions. Three electrolyte solutions were considered: NaCl, CsCl, and CsF. The electrolyte ions were chosen to cover a range of ionic sizes and affinities for the aqueous phase. The molecular dynamics simulations indicate the presence of a structured interfacial region resulting from the strong interaction of water with the mineral surface. The specific arrangement and preferred orientation of water that arise from this interaction create adsorption sites in the interfacial region, i.e., as far as 15 A away from the surface, and hence give rise to a strong correlation between the water and ion distributions. The structure of the hydrated ion, its effect on the water arrangement at the interface, and the strength of the ion-water bond are found to be key factors that determine the location and extent of ion adsorption at the interface. Additionally, in all simulations, we find a build up of positive charges near the surface due to cation adsorption, which is compensated by an accumulation of anions in the next few angströms. This creates an excess of negative charges, which is in turn compensated by an excess of positive charges, and so on. As we modeled a neutral surface, the structure of the electrolyte distribution arises from the complex interplay of the interactions between the surface, water, and the electrolyte ions rather than from the need to neutralize a surface charge. In addition, our simulations indicate that the electrolyte distribution does not resemble that of a classical electrical double layer. Indeed, our calculations predict the presence of several condensed layers and oscillations in the net charge away from the surface.

Journal Article↗

Surface structure of (10(-)10) and (11(-)20) surfaces of ZnO with density functional theory and atomistic simulation.

We have calculated the stability of two of the low-index surfaces known to dominate the morphology of ZnO as a function of stoichiometry. These two surfaces are (10(-)10) and (11(-)20). In each case, two terminations only are stable for a significant range of oxygen and hydrogen chemical potential: the pure stoichiometric surface and a surface covered in a monolayer of water. The mode by which the water adsorbs is however different for the two surfaces considered. On the (10(-)10) surface the close proximity of the water molecules means hydrogen bonding can occur between adjacent chemiabsorbed water molecules and hence there is little difference in the stability of the hydrated and hydroxylated surface, and in fact the most stable surface occurs with a combination of dissociated and undissociated water adsorption. In the case of the (11(-)20) surface, it is only when full dissociation has occurred that a hydrogen-bonding network can form. Our results also show good agreement between DFT and atomistic simulations, suggesting that potential based methods can usefully be applied to ZnO.

Journal Article↗

Reduction of NO2 on ceria surfaces.

Cerium dioxide, CeO2, plays an important role in catalysis, due to its ability to store and release oxygen depending on the conditions present in the catalyst environment. To understand the role of ceria in catalytic reactions, we need to study the details of the interaction of ceria surfaces with environmentally sensitive molecules. In this work, we examine the adsorption of the NO2 molecule onto defective (reduced) surfaces of ceria using density functional theory with a correction for on-site Coulomb interactions (DFT+U), which allows for a consistent description of pure and reduced ceria. The interaction of NO2 with defective (111), (110), and (100) surfaces gives an adsorbate-surface structure in which the bond lengths around one Ce(III) ion from the reduced surface shorten, while one N-O bond lengthens. Analysis of the electronic structure and spin density distributions demonstrates that one Ce(III) has been reoxidized to Ce(IV), with the formation of adsorbed NO2-. Finally, we discuss the energetics of the interaction of NO2 with ceria.

Journal Article↗

CeO2 catalysed conversion of CO, NO2 and NO from first principles energetics.

First principles calculations using density functional theory with corrections for on-site Coulomb interactions (DFT + U) are presented in which we compute the energy for the conversion of CO to CO(2), NO(2) to NO and NO to N(2) over ceria surfaces. The surface sensitivity is discussed on the basis of the vacancy formation energies.

Carbon Monoxide↗

Ab initio surface phase diagram of the {104} calcite surface.

Electronic structure calculations, performed at the density functional theory level, were employed to study the surface termination of the {104} calcite surface in contact with a gaseous phase containing water and carbon dioxide. A surface phase diagram was generated to investigate the change in surface termination as a function of temperature, pressure, and gas-phase composition. This diagram revealed that a nonstoichiometric termination could occur in atmospheric conditions at high relative humidity, hence suggesting that nonstoichiometric surfaces can play a major role in the chemistry of calcite surfaces.

Calcium Carbonate↗

Oxidising CO to CO2 using ceria nanoparticles.

We calculate, using simulated amorphisation and recrystallisation (A&R), that ceria (CeO2) nanoparticles, about 8 nm in diameter, comprise a high concentration of labile surface oxygen species, which we suggest will help promote the oxidation of CO to CO2. In particular, the ceria nanoparticle contains a high proportion of reactive {100} surfaces, surface steps and corner sites. When reduced to CeO1.95, the associated Ce3+ species and oxygen vacancies decorate step, corner and {100} sites in addition to plateau positions on {111}. The energetics of CO oxidation to CO2, catalysed by a ceria nanoparticle, is calculated to be lower compared with CO oxidation associated with the lowest energy surface (i.e. CeO2(111)) of the corresponding 'bulk' material. Our calculated morphologies for the ceria nanoparticles are in accord with experiment.

Carbon Dioxide↗

Atomistic simulation of charged iron oxyhydroxide surfaces in contact with aqueous solution.

Molecular dynamics simulations of aqueous solution/goethite interfaces show that the classical models of the electrical double layer do not accurately describe the distribution of ions near the surface (such a distribution is present even when the surface is neutral) and that the explicit treatment of solvent molecules is essential to capture the effects of the surface on the liquid phase.

Journal Article↗

Free energy of adsorption of water and metal ions on the [1014] calcite surface.

We calculated the free energy profiles of water and three metal ions (magnesium, calcium, and strontium) adsorbing on the [1014] calcite surface in aqueous solution. The approach uses molecular dynamics with parametrized equations to describe the interatomic forces. The potential model is able to reproduce the interactions between water and the metal ions regardless of whether they are at the mineral surface or in bulk water. The simulations predict that the free energy of adsorption of water is relatively small compared to the enthalpy of adsorption calculated in previous papers. This suggests a large change in entropy associated with the water adsorption on the surface. We also demonstrate that the free energy profile of a metal ion adsorbing on the surface correlates with the solvent density and that the rate of formation of an innersphere complex depends on overcoming a large free energy barrier, which is mainly electrostatic in nature. Furthermore, comparison among the rates of desorption of magnesium, calcium, and strontium from the calcite surface suggests that magnesium has a much lower rate of desorption due to its strong interactions with both water and the surface.

Journal Article↗

Free energy of adsorption of water and calcium on the [10 1 4] calcite surface.

Molecular dynamics simulations of the calcite-water interface have shown that the free energy of adsorption of water is relatively small compared to the previously calculated enthalpy of adsorption implying a large entropy change and that the free energy profile of a calcium adsorbing on the surface correlates with the solvent density; these calculations allow us to begin to address the rates of adsorption and desorption which are essential for studying growth and dissolution.

Journal Article↗

Encapsulated oxide nanoparticles: the influence of the microstructure on associated impurities within a material.

Simulation techniques have been used to explore how the microstructure of a material influences the nature of associated impurities embedded therein. We illustrate this by exploring four systems: BaO and CaO nanoparticles encapsulated within a ("perfect") MgO host lattice and SrO and MgO nanoparticles encapsulated within a ("microstructural") BaO lattice, which comprises a network of screw-edge dislocations. This study uses annealing techniques to generate energetically feasible nanoparticle structures and morphologies, dislocation networks, interfacial boundaries, and strain profiles. Specifically, the different encapsulated nanoparticles exhibit a range of morphologies, expose a variety of facets at the nanoparticle/host lattice interface, and are observed to rotate within the cavity they occupy inside the host lattice. The structure and nature of the nanoparticles reflect the lattice misfit between the nanoparticle and the host lattice. The study suggests also that there exists a "critical nanoparticle size", above which dislocations evolve.

Journal Article↗

Modelling inorganic solids and their interfaces: a combined approach of atomistic and electronic structure simulation techniques.

We are seeking to combine the reliability of the structures and energies obtained from quantum mechanical methods with the insights given by larger scale simulations, which are better able to search configurational space. We will discuss our recent work using quantum mechanical methods, based on DFT, which have been applied to the study of a number of solids. Al2O3, CeO2, MnO2 and CaCO3, and compare these with results using atomistic simulation where the forces between atoms are modelled using interatomic potentials. The results show that such quantum methods can be used successfully to screen the different potential models and where necessary, provide sufficient data to allow us to re-consider the potential models. In addition, we show examples where the quantum based methods can give further insights into the reactivity, particularly of surfaces. However, it still remains computationally expensive to search all possible configurations and by using the atomistic simulations to search through different configurations we can identify new structures which can be verified with the quantum based simulations.

Journal Article↗

The effect of size-dependent nanoparticle energetics on catalyst sintering.

Calorimetric measurements of metal adsorption energies directly provide the energies of metal atoms in supported metal nanoparticles. As the metal coverage increases, the particles grow, revealing the dependence of this energy on particle size, which is found to be much stronger than predicted with the usual Gibbs-Thompson relation. It is shown that this knowledge is crucial to accurately model long-term sintering rates of metal nanoparticles in catalysts.

Journal Article↗