PubMed Health⌕ Search

Biomedical subjects

Stephen E Halford

Publications and source records attributed to Stephen E Halford.

At least 19 recordsLinked to original sources
PubMed2006

Protein assembly and DNA looping by the FokI restriction endonuclease.

The FokI restriction endonuclease recognizes an asymmetric DNA sequence and cuts both strands at fixed positions upstream of the site. The sequence is contacted by a single monomer of the protein, but the monomer has only one catalytic centre and forms a dimer to cut both strands. FokI is also known to cleave DNA with two copies of its site more rapidly than DNA with one copy. To discover how FokI acts at a single site and how it acts at two sites, its reactions were examined on a series of plasmids with either one recognition site or with two sites separated by varied distances, sometimes in the presence of a DNA-binding defective mutant of FokI. These experiments showed that, to cleave DNA with one site, the monomer bound to that site associates via a weak protein-protein interaction with a second monomer that remains detached from the recognition sequence. Nevertheless, the second monomer catalyses phosphodiester bond hydrolysis at the same rate as the DNA-bound monomer. On DNA with two sites, two monomers of FokI interact strongly, as a result of being tethered to the same molecule of DNA, and sequester the intervening DNA in a loop.

DNA↗
PubMed2006

Crystal structure of Pseudomonas aeruginosa SPM-1 provides insights into variable zinc affinity of metallo-beta-lactamases.

Metallo-beta-lactamases (mbetals) confer broad-spectrum resistance to beta-lactam antibiotics upon host bacteria and escape the action of existing beta-lactamase inhibitors. SPM-1 is a recently discovered mbetal that is distinguished from related enzymes by possession of a substantial central insertion and by sequence variation at positions that maintain active site structure. Biochemical data show SPM-1 to contain two Zn2+ sites of differing affinities, a phenomenon that is well documented amongst mbetals but for which a structural explanation has proved elusive. Here, we report the crystal structure of SPM-1 to 1.9 A resolution. The structure reveals SPM-1 to lack a mobile loop implicated in substrate binding by related mbetals and to accommodate the central insertion in an extended helical interdomain region. Deleting this had marginal effect upon binding and hydrolysis of a range of beta-lactams. These data suggest that the interactions of SPM-1 with substrates differ from those employed by other mbetals. SPM-1 as crystallised contains a single Zn2+. Both the active site hydrogen-bonding network and main-chain geometry at Asp120, a key component of the binding site for the second zinc ion, differ significantly from previous mbetal structures. We propose that variable interactions made by the Asp120 carbonyl group modulate affinity for a second Zn2+ equivalent in mbetals of the B1 subfamily. We further predict that SPM-1 possesses the capacity to evolve variants of enhanced catalytic activity by point mutations altering geometry and hydrogen bonding in the vicinity of the second Zn2+ site.

Binding Sites↗
PubMed2005

Measurement of the contributions of 1D and 3D pathways to the translocation of a protein along DNA.

Proteins that act at specific DNA sequences bind DNA randomly and then translocate to the target site. The translocation is often ascribed to the protein sliding along the DNA while maintaining continuous contact with it. Proteins also can move on DNA by multiple cycles of dissociation/reassociation within the same chain. To distinguish these pathways, a strategy was developed to analyze protein motion between DNA sites. The strategy reveals whether the protein maintains contact with the DNA as it transfers from one site to another by sliding or whether it loses contact by a dissociation/reassociation step. In reactions at low salt, the test protein stayed on the DNA as it traveled between sites, but only when the sites were <50 bp apart. Transfers of >30 bp at in vivo salt, and over distances of >50 bp at any salt, always included at least one dissociation step. Hence, for this enzyme, 1D sliding operates only over short distances at low salt, and 3D dissociation/reassociation is its main mode of translocation.

DNA↗
PubMed2005

Long-range communications between DNA sites by the dimeric restriction endonuclease SgrAI.

The SgrAI endonuclease displays its maximal activity on DNA with two copies of its recognition sequence, cleaving both sites concertedly. While most restriction enzymes that act concurrently at two sites are tetramers, SgrAI is a dimer in solution. Its reaction at two cognate sites involves the association of two DNA-bound dimers. SgrAI can also bridge cognate and secondary sites, the latter being certain sequences that differ from the cognate by one base-pair. The mechanisms for cognate-cognate and cognate-secondary communications were examined for sites in the following topological relationships: in cis, on plasmids with two sites in a single DNA molecule; on catenanes containing two interlinked rings of DNA with one site in each ring; and in trans, on oligoduplexes carrying either a single site or the DNA termini generated by SgrAI. Both cognate-cognate and cognate-secondary interactions occur through 3-D space and not by 1-D tracking along the DNA. Both sorts of communication arise more readily when the sites are tethered to each other, either in cis on the same molecule of DNA or by the interlinking of catenane rings, than when released from the tether. However, the dimer bound to an oligoduplex carrying either a cognate or a secondary site could be activated to cleave that duplex by interacting with a second dimer bound to the recognition site, provided both duplexes are at least 30 base-pairs long: the second dimer could alternatively be bound to the two duplexes that correspond to the products of DNA cleavage by SgrAI.

Base Sequence↗
PubMed2005

Cleavage of individual DNA strands by the different subunits of the heterodimeric restriction endonuclease BbvCI.

BbvCI cleaves an asymmetric DNA sequence, 5'-CC downward arrow TCAGC-3'/5'-GC downward arrow TGAGG-3', as indicated. While many Type II restriction enzymes consist of identical subunits, BbvCI has two different subunits: R(1), which acts at GC downward arrow TGAGG; and R(2), which acts at CC downward arrow TCAGC. Some mutants of BbvCI with defects in one subunit, either R(1)(-)R(2)(+) or R(1)(+)R(2)(-), cleave only one strand, that attacked by the native subunit. In analytical ultracentrifugation at various concentrations of protein, wild-type and mutant BbvCI enzymes aggregated extensively, but are R(1)R(2) heterodimers at the concentrations used in DNA cleavage reactions. On a plasmid with one recognition site, wild-type BbvCI cleaved both strands before dissociating from the DNA, while the R(1)(-)R(2)(+) and R(1)(+)R(2)(-) mutants acted almost exclusively on their specified strands, albeit at relatively slow rates. During the wild-type reaction, the DNA is cleaved initially in one strand, mainly that targeted by the R(1) subunit. The other strand is then cleaved slowly by R(2) before the enzyme dissociates from the DNA. Hence, the nicked form accumulates as a transient intermediate. This behaviour differs from that of many other restriction enzymes, which cut both strands at equal rates. However, the activities of the R(1)(+) and R(2)(+) subunits in the wild-type enzyme can differ from their activities in the R(1)(+)R(2)(-) and R(1)(-)R(2)(+) mutants. Each active site in BbvCI therefore influences the other.

Base Sequence↗
PubMed2004

One recognition sequence, seven restriction enzymes, five reaction mechanisms.

The diversity of reaction mechanisms employed by Type II restriction enzymes was investigated by analysing the reactions of seven endonucleases at the same DNA sequence. NarI, KasI, Mly113I, SfoI, EgeI, EheI and BbeI cleave DNA at several different positions in the sequence 5'-GGCGCC-3'. Their reactions on plasmids with one or two copies of this sequence revealed five distinct mechanisms. These differ in terms of the number of sites the enzyme binds, and the number of phosphodiester bonds cleaved per turnover. NarI binds two sites, but cleaves only one bond per DNA-binding event. KasI also cuts only one bond per turnover but acts at individual sites, preferring intact to nicked sites. Mly113I cuts both strands of its recognition sites, but shows full activity only when bound to two sites, which are then cleaved concertedly. SfoI, EgeI and EheI cut both strands at individual sites, in the manner historically considered as normal for Type II enzymes. Finally, BbeI displays an absolute requirement for two sites in close physical proximity, which are cleaved concertedly. The range of reaction mechanisms for restriction enzymes is thus larger than commonly imagined, as is the number of enzymes needing two recognition sites.

Base Sequence↗
PubMed2004

How do site-specific DNA-binding proteins find their targets?

Essentially all the biological functions of DNA depend on site-specific DNA-binding proteins finding their targets, and therefore 'searching' through megabases of non-target DNA. In this article, we review current understanding of how this sequence searching is done. We review how simple diffusion through solution may be unable to account for the rapid rates of association observed in experiments on some model systems, primarily the Lac repressor. We then present a simplified version of the 'facilitated diffusion' model of Berg, Winter and von Hippel, showing how non-specific DNA-protein interactions may account for accelerated targeting, by permitting the protein to sample many binding sites per DNA encounter. We discuss the 1-dimensional 'sliding' motion of protein along non-specific DNA, often proposed to be the mechanism of this multiple site sampling, and we discuss the role of short-range diffusive 'hopping' motions. We then derive the optimal range of sliding for a few physical situations, including simple models of chromosomes in vivo, showing that a sliding range of approximately 100 bp before dissociation optimizes targeting in vivo. Going beyond first-order binding kinetics, we discuss how processivity, the interaction of a protein with two or more targets on the same DNA, can reveal the extent of sliding and we review recent experiments studying processivity using the restriction enzyme EcoRV. Finally, we discuss how single molecule techniques might be used to study the dynamics of DNA site-specific targeting of proteins.

DNA↗
PubMed2004

Dynamics of DNA loop capture by the SfiI restriction endonuclease on supercoiled and relaxed DNA.

The SfiI endonuclease is a prototype for DNA looping. It binds two copies of its recognition sequence and, if Mg(2+) is present, cuts both concertedly. Looping was examined here on supercoiled and relaxed forms of a 5.5 kb plasmid with three SfiI sites: sites 1 and 2 were separated by 0.4 kb, and sites 2 and 3 by 2.0 kb. SfiI converted this plasmid directly to the products cut at all three sites, though DNA species cleaved at one or two sites were formed transiently during a burst phase. The burst revealed three sets of doubly cut products, corresponding to the three possible pairings of sites. The equilibrium distribution between the different loops was evaluated from the burst phases of reactions initiated by adding MgCl(2) to SfiI bound to the plasmid. The short loop was favored over the longer loops, particularly on supercoiled DNA. The relative rates for loop capture were assessed after adding SfiI to solutions containing the plasmid and MgCl(2). On both supercoiled and relaxed DNA, the rate of loop capture across 0.4 kb was only marginally faster than over 2.0 kb or 2.4 kb. The relative strengths and rates of looping were compared to computer simulations of conformational fluctuations in DNA. The simulations concurred broadly with the experimental data, though they predicted that increasing site separations should cause a shallower decline in the equilibrium constants than was observed but a slightly steeper decline in the rates for loop capture. Possible reasons for these discrepancies are discussed.

Computer Simulation↗
PubMed2004

Generation of the BfiI restriction endonuclease from the fusion of a DNA recognition domain to a non-specific nuclease from the phospholipase D superfamily.

The BfiI endonuclease cleaves DNA at fixed positions downstream of an asymmetric sequence. Unlike other restriction enzymes, it functions without metal ions. The N-terminal half of BfiI is similar to Nuc, an EDTA-resistant nuclease from Salmonella typhimurium that belongs to the phosphoplipase D superfamily. Nuc is a dimer with one active site at its subunit interface, as is BfiI, but it cuts DNA non-specifically. BfiI was cleaved by thermolysin into an N-terminal domain, which forms a dimer with non-specific nuclease activity, and a C-terminal domain, which lacks catalytic activity but binds specifically to the recognition sequence as a monomer. On denaturation with guanidinium, BfiI underwent two unfolding transitions: one at a relatively low concentration of guanidinium, to a dimeric non-specific nuclease; a second at a higher concentration, to an inactive monomer. The isolated C-terminal domain unfolded at the first (relatively low) concentration, the isolated N-terminal at the second. Hence, BfiI consists of two physically separate domains, with catalytic and dimerisation functions in the N terminus and DNA recognition functions in the C terminus. It is the first example of a restriction enzyme generated by the evolutionary fusion of a DNA recognition domain to a phosphodiesterase from the phospholipase D superfamily. BfiI may consist of three structural units: a stable central core with the active site, made from two copies of the N-terminal domain, flanked by relatively unstable C-terminal domains, that each bind a copy of the recognition sequence.

Bacterial Proteins↗
PubMed2004

Enzyme-mediated DNA looping.

Most reactions on DNA are carried out by multimeric protein complexes that interact with two or more sites in the DNA and thus loop out the DNA between the sites. The enzymes that catalyze these reactions usually have no activity until they interact with both sites. This review examines the mechanisms for the assembly of protein complexes spanning two DNA sites and the resultant triggering of enzyme activity. There are two main routes for bringing together distant DNA sites in an enzyme complex: either the proteins bind concurrently to both sites and capture the intervening DNA in a loop, or they translocate the DNA between one site and another into an expanding loop, by an energy-dependent translocation mechanism. Both capture and translocation mechanisms are discussed here, with reference to the various types of restriction endonuclease that interact with two recognition sites before cleaving DNA.

Binding Sites↗
PubMed2003

DNA supercoiling enables the type IIS restriction enzyme BspMI to recognise the relative orientation of two DNA sequences.

Many proteins can sense the relative orientations of two sequences at distant locations in DNA: some require sites in inverted (head-to-head) orientation, others in repeat (head-to-tail) orientation. Like many restriction enzymes, the BspMI endonuclease binds two copies of its target site before cleaving DNA. Its target is an asymmetric sequence so two sites in repeat orientation differ from sites in inverted orientation. When tested against supercoiled plasmids with two sites 700 bp apart in either repeated or inverted orientations, BspMI had a higher affinity for the plasmid with repeated sites than the plasmid with inverted sites. In contrast, on linear DNA or on supercoiled DNA with sites 1605 bp apart, BspMI interacted equally with repeated or inverted sites. The ability of BspMI to detect the relative orientation of two DNA sequences thus depends on both the topology and the length of the intervening DNA. Supercoiling may restrain the juxtaposition of sites 700 bp apart to a particular alignment across the superhelical axis, but the juxtaposition of sites in linear DNA or far apart in supercoiled DNA may occur without restraint. BspMI can therefore act as a sensor of the conformational dynamics of supercoiled DNA.

Binding Sites↗
PubMed2003

How the BfiI restriction enzyme uses one active site to cut two DNA strands.

Unlike other restriction enzymes, BfiI functions without metal ions. It recognizes an asymmetric DNA sequence, 5'-ACTGGG-3', and cuts top and bottom strands at fixed positions downstream of this sequence. Many restriction enzymes are dimers of identical subunits, with one active site for each DNA strand. Others, like FokI, dimerize transiently during catalysis. BfiI is also a dimer but it has only one active site, at the dimer interface. We show here that BfiI remains a dimer as it makes double-strand breaks in DNA and that its single active site acts sequentially, first on the bottom and then the top strand. Hence, after cutting the bottom strand, a rearrangement of either the protein and/or the DNA in the BfiI-DNA complex must switch the active site to the top strand. Low pH values selectively block top-strand cleavage, converting BfiI into a nicking enzyme that cleaves only the bottom strand. The switch to the top strand may depend on the ionization of the cleaved 5' phosphate in the bottom strand. BfiI thus uses a mechanism for making double-strand breaks that is novel among restriction enzymes.

Base Sequence↗
PubMed2003

Subunit assembly for DNA cleavage by restriction endonuclease SgrAI.

The SgrAI endonuclease usually cleaves DNA with two recognition sites more rapidly than DNA with one site, often converting the former directly to the products cut at both sites. In this respect, SgrAI acts like the tetrameric restriction enzymes that bind two copies of their target sites before cleaving both sites concertedly. However, by analytical ultracentrifugation, SgrAI is a dimer in solution though it aggregates to high molecular mass species when bound to its specific DNA sequence. Its reaction kinetics indicate that it uses different mechanisms to cleave DNA with one and with two SgrAI sites. It cleaves the one-site DNA in the style of a dimeric restriction enzyme acting at an individual site, mediating neither interactions in trans, as seen with the tetrameric enzymes, nor subunit associations, as seen with the monomeric enzymes. In contrast, its optimal reaction on DNA with two sites involves an association of protein subunits: two dimers bound to sites in cis may associate to form a tetramer that has enhanced activity, which then cleaves both sites concurrently. The mode of action of SgrAI differs from all restriction enzymes characterised previously, so this study extends the range of mechanisms known for restriction endonucleases.

Binding Sites↗
PubMed2003

Protein motion from non-specific to specific DNA by three-dimensional routes aided by supercoiling.

DNA-binding proteins are generally thought to locate their target sites by first associating with the DNA at random and then translocating to the specific site by one-dimensional (1D) diffusion along the DNA. We report here that non-specific DNA conveys proteins to their target sites just as well when held near the target by catenation as when co-linear with the target. Hence, contrary to the prevalent view, proteins move from random to specific sites primarily by three-dimensional (3D) rather than 1D pathways, by multiple dissociation/re-association events within a single DNA molecule. We also uncover a role for DNA supercoiling in target-site location. Proteins find their sites more readily in supercoiled than in relaxed DNA, again indicating 3D rather than 1D routes.

Anthracenes↗
PubMed2003

The metal-independent type IIs restriction enzyme BfiI is a dimer that binds two DNA sites but has only one catalytic centre.

BfiI is a novel type IIs restriction endonuclease that, unlike all other restriction enzymes characterised to date, cleaves DNA in the absence of Mg(2+). The amino acid sequence of the N-terminal part of BfiI has some similarities to Nuc of Salmonella typhimurium, an EDTA-resistant nuclease akin to phospholipase D. The dimeric form of Nuc contains a single active site composed of residues from both subunits. To examine the roles of the amino acid residues of BfiI that align with the catalytic residues in Nuc, a set of alanine replacement mutants was generated by site-directed mutagenesis. The mutationally altered forms of BfiI were all catalytically inactive but were still able to bind DNA specifically. The active site of BfiI is thus likely to be similar to that of Nuc. BfiI was also found by gel-filtration to be a dimer in solution. Both gel-shift and pull-down assays indicated that the dimeric form of BfiI binds two copies of its recognition sequence. In reactions on plasmids with either one or two copies of its recognition sequence, BfiI cleaved the DNA with two sites more rapidly than that with one site. Yet, when bound to two copies of its recognition sequence, the BfiI dimer cleaved only one phosphodiester bond at a time. The dimer thus seems to contain two DNA-binding domains but only one active site.

Amino Acid Sequence↗
PubMed2002

How to get from A to B: strategies for analysing protein motion on DNA.

Essentially all genetic events require proteins to move from one location in a DNA polymer to another location in the same chain. A protein will seldom bind to a specific site in the DNA by colliding directly with that site. Instead, the protein will almost always collide first with a random site anywhere in the DNA and then migrate to the specific site by a facilitated-diffusion process that is constrained to the zone of that DNA molecule. Thereafter, many proteins bound to their target sites translocate in a specified direction along the DNA by a energy-dependent vectorial mechanism. This review will discuss some of the strategies that have been developed to analyse the motion of proteins on DNA, with respect to both the random diffusion processes involved in target-site location by DNA-binding proteins and the vectorial processes involved in unidirectional translocation along DNA.

DNA↗
PubMed2002

Communications between catalytic sites in the protein-DNA synapse by the SfiI endonuclease.

The SfiI endonuclease is a tetrameric protein with two DNA-binding clefts. It has to bind two copies of its recognition sequence, one at each cleft, before it cleaves DNA. While SfiI binds cooperatively to two cognate sites, it binds only one non-cognate DNA molecule at a time and the resultant complex is precluded from binding cognate DNA at the vacant cleft. To examine the communications between separate binding sites in a protein that synapses two segments of DNA, SfiI was tested with oligonucleotide duplexes containing its recognition sequence but with either R(p) or S(p) phosphorothioate linkages at the scissile bonds. Though SfiI has low activity on the R(p) and none against the S(p) diastereoisomer, it bound these duplexes in the same cooperative manner as oxyester duplexes, though with a reduced affinity for the S(p) derivative. It also formed complexes with one phosphorothioate-duplex and one oxyester-duplex but, when Mg(2+) was added to the hybrid complexes, the phosphorothioate moiety at one DNA-binding cleft prevented the enzyme from cleaving the oxyester duplex at the other cleft. SfiI is thus restrained from catalytic action until it recognises the correct nucleotide sequence at two DNA loci and the correct phosphodiester functions at both loci.

Base Sequence↗