Biomedical subjects
Publications and source records attributed to Stephen J Loeb.
[reaction: see text] Addition of acid and base allows switching between two different structures in a push-pull bis(pyridinium)ethane axle, controlling its ability to form [2]pseudorotaxanes with a dibenzo-24-crown-8 ether wheel.
[2]Rotaxanes based on the 1,2-bis(pyridinium)ethane subset[24]crown-8 ether motif were prepared that contain a terminal terpyridine group for coordination to a transition-metal ion. These rotaxane ligands were utilized in the preparation of a series of heteroleptic [Ru(terpy)(terpy-rotaxane)]2+ complexes. The compounds were characterized by 1D and 2D 1H NMR spectroscopy, X-ray crystallography, and high-resolution electrospray ionization mass spectrometry. The effect of using a rotaxane as a ligand was probed by UV/Vis/NIR absorption and emission spectroscopy of the Ru(II) complexes. In contrast with the parent [Ru(terpy)(2)]2+ complex, at room temperature the examined complexes exhibit a luminescence band in the near infrared region and a relatively long lived triplet metal-to-ligand charge-transfer (3MLCT) excited state, owing to the presence of strong-electron-acceptor pyridinium substituents on one of the two terpy ligands. Visible-light excitation of the Ru-based chromophore in acetonitrile at room temperature causes an electron transfer to the covalently linked 4,4'-bipyridinium unit and the quenching of the MLCT luminescence. The 3MLCT excited state, however, is not quenched at all in rigid matrix at 77 K. The rotaxane structure was found to affect the absorption and luminescence properties of the complexes. In particular, when a crown ether surrounds the cationic axle, the photoinduced electron-transfer process is slowed down by a factor from 2 to 3. Such features, together with the synthetic and structural advantages offered by [Ru(terpy)2]2+-type complexes compared to, for example, [Ru(bpy)3]2+-type compounds, render these rotaxane-metal complexes promising candidates for the construction of photochemical molecular devices with a wire-type structure.
[2]Rotaxanes utilising the 1,2-bis(pyridinium)ethane, 24-crown-8 motif can exist in two distinct co-conformations whose relative abundances are solvent dependent.
Linear 1,2-bis(pyridinium)ethane 'axles' and macrocyclic 24-membered crown ether 'wheels' (, and ) combine to form [2]pseudorotaxanes. These interpenetrated adducts are held together by N+...O ion-dipole interactions, a series of C-H...O hydrogen bonds and pi-stacking between electron-poor pyridinium rings of the axle and electron-rich catechol rings of the wheel. 1H NMR spectroscopy was used to identify the structural details of the interaction and to determine the thermodynamics of the binding process in solution. Analysis of nine of these adducts by single crystal X-ray crystallography allowed a detailed study of the non-covalent interactions in the solid state. A wide variety of structural changes could be made to the system. The versatility and potential of the template for the construction of permanently interlocked structures such as rotaxanes and catenanes is discussed.
[reaction: see text] As a hybrid of the N,N-dibenzylammonium and 1,2-bis(pyridinium)ethane axles, various N-benzylanilinium cations were investigated as suitable axles for the formation of [2]pseudorotaxanes with the 24-membered crown ethers 24C8 and DB24C8. The effect of electron-donating OCH(3) and electron-withdrawing CF(3) groups on both the anilinium and benzyl aromatic rings was studied. Formation constants and structural details were compared to the [2]pseudorotaxanes formed by the two aforementioned dibenzylammonium and 1,2-bis(pyridinium)ethane axles.
Anion complexation studies on a series of platinum(II) tetrakis(pyrrolylpyridine) salts demonstrate the importance of CH-anion hydrogen bonds in coordinating anionic guests in solution and the solid-state.
To investigate the possibility of incorporating the 1,2-bis(pyridinium)ethane[subset or is implied by]24C8 [2]pseudorotaxane motif into dendrimer like macromolecules, a series of branched [n]rotaxanes were prepared employing multiple dibenzo-24-membered crown ether wheels with various aromatic core structures and the 1,2-bis(4,4'-dipyridinium)ethane axle. Yields of branched [2]-, [3]- and [4]rotaxanes were dependent on the size of the core and the relative proximity of the crown ethers arranged around the core unit.
Linear exodentate pyridinium ligands such as 1,2-bis(4,4'-bipyridinium)ethane or its bis N-oxide derivative can be used as axles for the formation of [2]pseudorotaxanes utilising 24-membered crown ethers such as dibenzo-24-crown-8 ether (DB24C8) as the wheel. These [2]pseudorotaxanes can be used to construct coordination networks using transition or lanthanide metal ions as the connecting nodes. 1-, 2- and 3D metal-organic rotaxane frameworks (MORFs) are possible. The resulting materials contain mechanically interlocked units and may be the forerunners of unique solids which contain machine-like components in an ordered array.
Explore the source record for details and available documents.
A triethylphosphonium group attached to a pyridinium ethane moiety can be used as an axle for the self-assembly of [2]pseudorotaxanes and [2]rotaxanes. Although [2]pseudorotaxane formation is limited due to the bulk of the PR4+ group, [2]rotaxanes can be formed utilising 24-crown-8 ether, benzo-24-crown-8 ether and naphtho-24-crown-8 ether. The synthesis of these [2]rotaxanes and the X-ray structure of the [2]rotaxane containing a 24-crown-8 ether wheel are described. When the crown ether contains an aromatic group two possible conformational isomers exist; these are identified at low temperature by 1H and 31P NMR spectroscopy.
A new class of synthetic receptors for anions can be prepared by arranging urea hydrogen-bond donor groups on a simple metal-organic scaffold. The complex cation [PtL4]2+ (L = 8-(n-butylurea)iso-quinoline) can adopt four conformations reminiscent of calix[4]arene-based receptors; "cone", "partial cone", "1,2-alternate", or "1,3-alternate". 1H NMR solution data and solid-state X-ray structures show that a "1,2-alternate" conformation is used to bind spherical halide ions while a "cone" conformation is involved in strong binding with the tetrahedral oxy-anions such as the sulfate ion; even in a strongly competitive solvent such as DMSO.
Formation of a [3]catenane containing dibenzo-24-crown ether wheels and a large dipyridiniumethane ring is templated by formation of a host-guest adduct between the [3]catenane and the external crown ether.
The reaction of 4, 7-phenanthroline (1) with aqueous transitionmetal complexes [Mn(H2O)6][NO3]2, [Co(H2O)6][NO3]2, [Ni(H2O)6[NO3]2, [Mn(H2O)6][ClO4]2, and [Co(H2O)6][ClO4]2 does not produce coordination complexes between these metal cations and the N-donor ligand as expected. Instead, supramolecular hydrogenbonded networks are formed between the nitrogen donor atoms of 4, 7-phenanthroline and the OH groups of coordinated water molecules: M-O-H...N interactions. This motif of second-sphere coordination for 1 can be exploited as a tool for crystal engineering. As a demonstration of the generality of this new interaction as a supramolecular building block, five X-ray crystal structures are reported that utilise this hydrogen bonding scheme; [Co(H2O)4(NO3)2].(1)2 (2a), [Co(MeCN)2(H2O)4][ClO4]2.(1)2 (2b), [Ni(H2O)4(NO3)2].(1)2 (3a), [Mn(H2O)4(NO3)2].(1)2 (4a), and [Mn(H2O)6][ClO4]2.(1)(4).4H2O (4b). Each network involves complete saturation of the hydrogen-bond donor sets between the aqua complex and 1 using primarily M-O-H...N(1) and M-O-H...O(anion), interactions. Thermogravimteric analysis shows these materials to have stabililities similar to coordination polymers involving metal-ligand bonds; this demonstrates that second-sphere hydrogen bonding has potential for the construction of polymeric metal-containing materials.
The compound 2,11-dithia[3.3]orthocyclophane (L) is a mesocyclic dithioether that can act as a bidentate ligand in different conformations. In the ionic heteroleptic complexes [PtL(eta(4)-cod)][CF(3)SO(3)](2) (1), [RhL(eta(4)-cod)][CF(3)SO(3)] (2), and [IrL(eta(4)-cod)][CF(3)SO(3)] (3) (cod = 1,5-cyclooctadiene), L is coordinated in the anti I conformation both in solution and in the solid state, as revealed by an X-ray diffraction study of complex 1. However, in complexes [PdL(PPh(3))(2)][SO(3)CF(3)](2) (4) and [PtL(PPh(3))(2)][SO(3)CF(3)](2) (5), L exhibits two different conformations: anti I and anti II in a 40:60 ratio, as observed by (1)H and (31)P NMR spectroscopy, with no exchange up to 90 degrees C. The homoleptic complexes [PdL(2)][SO(3)CF(3)](2) (6) and [PtL(2)][SO(3)CF(3)](2) (7), with two ligands bound to the metal, display two isomers in solution, one of them with L in conformations anti I-anti II and the other with conformations anti II-anti II with a 75:25 ratio. The X-ray structure of 6 showed only the presence of the anti II-anti II isomer in the solid state. All complexes were synthesized by the reaction of a suitable chloride complex with 2 equiv of silver triflate and 1 equiv of L.
Protonated 1,2-bis(4,4'-bipyridinium)ethane axles and dibenzo-24-crown-8 ether wheels thread to form [2]pseudorotaxanes which associate in the solid state to form pseudopolyrotaxanes by hydrogen bonding or pi-stacking.