Biomedical subjects

Subrata Kundu

Publications and source records attributed to Subrata Kundu.

12 recordsLinked to original sources

PubMed2005

Deposition of CTAB-terminated nanorods on bacteria to form highly conducting hybrid systems.

Gold nanorods and nanospheres capped with positively charged CTAB are deposited on the surface of gram-positive bacterium having negatively charged teichoic acid brushes. The deposition rate is more than an order of magnitude faster than that for peptide and nucleic acid capped nanoparticles. For the nanorods, never been reported before, the strong electrostatic attraction causes the rods to bend conformally over the curved bacterium surface in random orientations. This leads to formation of an efficient percolating cluster (i.e., low contact resistance and high radius of gyration) with 104-fold higher current at 3-fold lower coverage compared to a monolayer from nanospheres. The high monolayer conductivity at only approximately 10% coverage for nanorods has potential for fabricating a novel class of bioelectronic devices by coupling electronic "nanocircuitry" at the surface to the biological function of microorganisms.

Bacillus cereus↗

PubMed2005

Synthesis and characterization of N,N-dimethyldodecylamine-capped Aucore-Pdshell nanoparticles in toluene.

In this paper a convenient route for synthesizing Au(core)-Pd(shell) bimetallic nanoparticles in toluene has been reported as a result of co-reduction of gold(III) and palladium(II) precursors in toluene. N,N-Dimethyldodecylamine was used as a capping agent for the core-shell particles, which not only imparts stability to the organosol but also controls morphology of the evolved particles. The particles were characterized using UV-visible, transmission electron microscopy, and X-ray diffraction measurements. All results substantiate the formation of core-shell structure of the synthesized particles.

Journal Article↗

PubMed2005

Size-selective synthesis and stabilization of gold organosol in C(n)TAC: enhanced molecular fluorescence from gold-bound fluorophores.

Gold nanoparticles of variable sizes have been synthesized in toluene employing two-phase (water-toluene) extraction of AuCl4- followed by its reduction with sodium borohydride in the presence of a series of cationic surfactants of a homologous series having the general formula C(n)TAC. The solubility features of the gold particles in the organic solvent have been accounted qualitatively by calculating the van der Waals interaction potential between the particles. The effect of thermal energy and medium dielectric constant on the stability of metal particles has been studied by measuring the surface plasmon resonance. The stabilization of surfactant-mediated gold particles as hydrosol or organosol has been elucidated by considering the double-layer interaction as a function of the dielectric constant of the solvent medium. The influence of the counterion of the phase transfer reagent and stabilizing ligand on the photochemical stability of the gold colloids has been investigated. The fluorescence probe 1-methylaminopyrene (MAP) was considered for the surface functionalization of the gold particles, and it has been found that there is an enhancement of molecular fluorescence from the gold-probe assembly.

Journal Article↗

PubMed2005

Magnetite nanoparticles with tunable gold or silver shell.

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.

Journal Article↗

PubMed2005

Synthesis, characterization, and optical properties of AuSe nanoalloys.

A solution phase approach to synthesize a new metal-semiconductor nanocomposite, AuSe nanoalloy has been reported. The synthesis has been achieved through UV-photoactivation of preformed Au and Se nanoparticles in micelle. Non-ionic surfactant Triton X-100 was exploited as a micellar medium for effective fusion of gold and selenium particles under UV. Both physical and chemical studies have been performed to characterize the composition and morphology of the particles. UV-visible, TEM, SEM, XPS and AFM analyses were done for characterization purpose. The optical properties of nanocomposites have been substantiated through their interaction with a fluorescent probe, eosin in aqueous solution. The spectroscopic investigation of dye-metal-semiconductor assembly has been examined critically. It has been found that the dye experiences J and H types of aggregation on the surfaces of gold and selenium nanoparticles respectively. Again, the composition dependent change of the emission profile of the probe on different nanocomposite surfaces has been rationalized in accordance with the molecular dimerization of the dye.

Alloys↗

PubMed2004

Immobilization and recovery of au nanoparticles from anion exchange resin: resin-bound nanoparticle matrix as a catalyst for the reduction of 4-nitrophenol.

The immobilization of gold nanoparticles in anion exchange resin and their quantitative retrieval by means of a cationic surfactant, cetylpyridinium chloride, is studied. The resin-bound gold nanoparticles (R-Au) have been used successfully as a solid-phase catalyst for the reduction of 4-nitrophenol by sodium borohydride. At the end of the reaction, the solid matrix remains activated and separated from the product. The recycling of catalyst particles after the quantitative reduction of 4-nitrophenol and the recovery of gold nanoparticles with unaffected particle morphology from the resin-bound gold nanoparticle entity have been reported.

Journal Article↗

PubMed2004

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates.

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.

Journal Article↗

PubMed2004

Emission behavior of 1-methylaminopyrene in aqueous solution of anionic surfactants.

A new fluorescent probe, methylamino derivative of pyrene, has been considered to characterize the concentration dependent emission behavior of an aqueous solution of anionic surfactants, viz., SDS, DSS, and SDBS. It was found that the emission of the probe is uniquely sensitive to the changes in surfactant (anionic) concentration due to the functional group effect of the probe over the parent moiety, pyrene. Here, 1-methylaminopyrene (MAP) showed significant quenching of emission well below the critical micellar concentration (cmc) of the surfactant. Excimer emission of the probe due to the formation of premicellar aggregates of the surfactant solutions at a concentration close to but below the cmc and again an enhanced emission of the probe above the cmc were observed as a consequence of definite MAP-surfactant interactions. These observations assisted the possible quantification ofsurfactant concentrations and their chain length dependent premicellar aggregate formations. Significant monomer emission in relation to probe distribution in micelle was analytically authenticated. Dynamic light scattering (DLS) studies revealed the incorporation of the probe molecules in the micellar core. The fluorophore emission showed nonlinear behavior when the surfactant concentration was far above the cmc. Abrupt changes in the emission characteristics in relation to the micellar concentration led to the determination of the cmc of the surfactants.

Anions↗

PubMed2004

Photochemical deposition of SERS active silver nanoparticles on silica gel and their application as catalysts for the reduction of aromatic nitro compounds.

We report an impregnation technique for immobilization of silver(I) gelatin complex on silica gel. Subsequent UV exposure of the dry impregnated silica gel deposited silver nanoparticles on the solid matrix. Conventional techniques (UV-visible spectroscopy, TEM, EDAX, and thermal analysis) have been used to identify and characterize silver particles on silica surfaces. The photoproduced silver particles have shown unique SERS activity that authenticates the presence of silver nanoclusters in the silica matrix. Hence, the surface of the silica matrix remains SERS-active for months. This surface activity of the silica matrix inspired us to successfully study the catalytic reduction of nitro-compounds in aqueous, organic, and three different micellar media. Different thermodynamic parameters for the reduction processes have also been evaluated. Catalytic activity of the particles in micelles is explained in the light of hydrophobic and electrostatic interactions between the substrate and the micelles.

Journal Article↗

PubMed2004

Removal of arsenic using hardened paste of Portland cement: batch adsorption and column study.

Hardened paste of Portland cement (HPPC) has been used as a low-cost adsorbent for the removal of arsenic from water environment. Results from the batch experiments, conducted at an initial concentration of 0.2 ppm of arsenate, suggest arsenate removal up to 95%. Kinetic profiles were developed for various conditions. Effects of adsorbent dose, common ions such as Ca(2+), Mg(2+), Fe(3+), Fe(2+), Cl(-), SO(4)(2-), NO(3)(-), PO(4)(3-) and of pH were studied in detail. Adsorption isotherm studies revealed that the Freundlich isotherm was followed with a better correlation than the Langmuir isotherm. Arsenite could also be removed up to approximately 88% using the same material, HPPC. Finally, column studies were undertaken involving the new HPPC to check the suitability of the material for the removal of total arsenic content from water body. Kinetic experiments for the removal of arsenic by column studies revealed a film diffusion mechanism.

Adsorption↗

PubMed2004

Hardened paste of Portland cement--a new low-cost adsorbent for the removal of arsenic from water.

Portland cement has been used as a low-cost adsorbent for the removal of arsenic from the water environment. In the batch experiments conducted at an initial concentration of 0.2 ppm of arsenate, it was found that arsenate could be removed up to 95%. Kinetic profiles were developed for various conditions. Effect of adsorbent dose. effects of common ions such as Ca(2+), Mg(2+), Fe(3+)/Fe(2+), Cl(-), SO4(2-), NO3(-), PO4(3-), and the effect of pH was studied. Adsorption isotherm studies were performed and it was observed that the Freundlich isotherm was followed with a better correlation than the Langmuir isotherm. Arsenite could also be removed up to approximately 88% using the same material. A new detection method for arsenate/arsenite was developed for routine analysis of arsenic and used during the entire study.

Adsorption↗

PubMed2003

Wet chemical method for synthesis of superparamagnetic alloyed Ni--Pd and Ni--Pt nanomagnets in micelles.

The evolution of sphere- and rod-shaped superparamagnetic Ni--Pd and Ni--Pt nanoparticles by wet chemical methods is reported. It has been shown that increased CTAB (cetyltrimethylammonium bromide) concentration at room temperature promotes the formation of a higher proportion of rod-shaped nanomagnets over spherical particles. Temperature-dependent magnetic properties, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electron dispersive X-ray (EDX) studies reveal the superparamagnetic behavior, size distribution, and percentage composition of the alloyed structures.

Journal Article↗