Biomedical subjects
Publications and source records attributed to Sudipa Panigrahi.
Coinage metal chalcogenides in their nanoregime have been synthesized in aqueous medium at room temperature by mixing the nanoparticles of silver or copper with selenium nanoparticles which are authenticated by UV-vis, XRD and TEM analyses.
A new solid-phase catalyst has been designed and reported here for the catalytic reduction of o-nitrobenzoic acid to anthranilic acid. Electrostatic field force helps immobilization, in turn deposition of silver nanoparticles onto solid resin surfaces and reduction of o-nitrobenzoic acid through effective catalysis. While characterization of catalyst particles has been performed by different physical methods (XRD, XPS, SEM, TEM, and EDX) in a worthwhile fashion, selective reduction of o-nitrobenzoic acid has also been achieved conveniently (approximately 95%). Different thermodynamic parameters for the reduction reaction have been presented from varied experimental conditions. Novelty of this work lies with the catalytic efficiency of nanometer size silver particles immobilized solid-phase matrix for one step synthesis of anthranilic acid over bulk silver.
Silver nanoparticle aggregates were synthesized in large scale using resorcinol under alkaline condition to obtain an assembly of silver clusters. Stable dispersion of the cluster in aqueous medium has been examined out of resorcinol-capped silver nanoparticle assemblies. The UV-vis spectroscopy during the particle evolution has been studied in detail. From the high-resolution TEM (HRTEM) image and XRD pattern it was confirmed that the particles are made of pure silver only. The capping action of resorcinol has been authenticated from the FTIR spectra. UV-vis spectroscopy and TEM images reveal that the temperature, effect of vibrational energy, heat shock, and time-dependent particle evolution have unique bearing on the stability and surface properties of the clusters. The concentrations of silver nitrate, resorcinol, and NaOH have important influence on the particle evolution and its size. TEM images incite us to examine the aggregates to capitulate surface-enhanced Raman scattering (SERS) to the single molecular level using crystal violet (CV) and cresyl fast violet (CFV) as molecular probes. The SERS intensity of CV increases with increasing the size of the silver aggregate.
This article reports the reduction of methylene blue (MB) by thiocyanate ions (SCN(-)) in aqueous and micellar solutions. Thiocyanate ions are found to be an effective reducing agent for the decolorization of methylene blue under ambient condition. Effects of salting-in and salting-out agents have been investigated for real-time application in the reduction process. The salting-in agent urea has been found to uniquely enhance the rate of the reduction of MB by thiocyanate ion in the presence of micelles. Again, the catalytic activity of nanoparticles in the reduction of MB has also been studied. Detailed kinetic and thermodynamic aspects have been considered to realize the interaction between methylene blue and thiocyanate. Kinetic studies revealed that the reaction is reversible and follows first-order reaction kinetics.
Bimetallic nanoshells on functionalized polystyrene beads have been fabricated through a layer-by-layer deposition technique exploiting electrostatic interaction. The synthesis has been achieved through the immobilization and successive reduction of the corresponding precursor ions. It has been shown that the thickness of the shell can be controlled by a number of cyclic depositions of respective metals onto the surface of the polystyrene beads.
In this paper a convenient route for synthesizing Au(core)-Pd(shell) bimetallic nanoparticles in toluene has been reported as a result of co-reduction of gold(III) and palladium(II) precursors in toluene. N,N-Dimethyldodecylamine was used as a capping agent for the core-shell particles, which not only imparts stability to the organosol but also controls morphology of the evolved particles. The particles were characterized using UV-visible, transmission electron microscopy, and X-ray diffraction measurements. All results substantiate the formation of core-shell structure of the synthesized particles.
Gold nanoparticles of variable sizes have been synthesized in toluene employing two-phase (water-toluene) extraction of AuCl4- followed by its reduction with sodium borohydride in the presence of a series of cationic surfactants of a homologous series having the general formula C(n)TAC. The solubility features of the gold particles in the organic solvent have been accounted qualitatively by calculating the van der Waals interaction potential between the particles. The effect of thermal energy and medium dielectric constant on the stability of metal particles has been studied by measuring the surface plasmon resonance. The stabilization of surfactant-mediated gold particles as hydrosol or organosol has been elucidated by considering the double-layer interaction as a function of the dielectric constant of the solvent medium. The influence of the counterion of the phase transfer reagent and stabilizing ligand on the photochemical stability of the gold colloids has been investigated. The fluorescence probe 1-methylaminopyrene (MAP) was considered for the surface functionalization of the gold particles, and it has been found that there is an enhancement of molecular fluorescence from the gold-probe assembly.
Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.
In this report, selenious acid (H2SeO3) has been exploited to study the decolorization of a cationic dye, dimethylmethylene blue (DMMB) with UV-light. Micelles have effectively been employed as organized media to promote the rate of decolorization of the dye molecules. Micellar catalysis has been explained as a consequence of electrostatic, hydrophobic and charge transfer interactions. It has also been shown that strong charge transfer and electrostatic interaction lead to an appreciable enhancement of the reaction rate in micelle, whereas, weak hydrophobic interaction is of marginal importance. Existence of monomer-dimer equilibrium for the dye molecules under certain selective environments has been identified spectrophotometrically. Then the shift of dimer-monomer equilibrium of the dye has been successfully studied in aqueous and micellar environments exploiting photodecolorization process for the dye in solution. 'Salting-in' and 'salting-out' agents were introduced into the reaction mixture to examine the viability of the dye decolorization process for dye contaminated water samples.
A solution phase approach to synthesize a new metal-semiconductor nanocomposite, AuSe nanoalloy has been reported. The synthesis has been achieved through UV-photoactivation of preformed Au and Se nanoparticles in micelle. Non-ionic surfactant Triton X-100 was exploited as a micellar medium for effective fusion of gold and selenium particles under UV. Both physical and chemical studies have been performed to characterize the composition and morphology of the particles. UV-visible, TEM, SEM, XPS and AFM analyses were done for characterization purpose. The optical properties of nanocomposites have been substantiated through their interaction with a fluorescent probe, eosin in aqueous solution. The spectroscopic investigation of dye-metal-semiconductor assembly has been examined critically. It has been found that the dye experiences J and H types of aggregation on the surfaces of gold and selenium nanoparticles respectively. Again, the composition dependent change of the emission profile of the probe on different nanocomposite surfaces has been rationalized in accordance with the molecular dimerization of the dye.
Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.
Portland cement has been used as a low-cost adsorbent for the removal of arsenic from the water environment. In the batch experiments conducted at an initial concentration of 0.2 ppm of arsenate, it was found that arsenate could be removed up to 95%. Kinetic profiles were developed for various conditions. Effect of adsorbent dose. effects of common ions such as Ca(2+), Mg(2+), Fe(3+)/Fe(2+), Cl(-), SO4(2-), NO3(-), PO4(3-), and the effect of pH was studied. Adsorption isotherm studies were performed and it was observed that the Freundlich isotherm was followed with a better correlation than the Langmuir isotherm. Arsenite could also be removed up to approximately 88% using the same material. A new detection method for arsenate/arsenite was developed for routine analysis of arsenic and used during the entire study.