PubMed Health⌕ Search

Biomedical subjects

Suk Bong Hong

Publications and source records attributed to Suk Bong Hong.

7 recordsLinked to original sources
PubMed2006

Preparation, crystal structure, and thermal stability of the cadmium sulfide nanoclusters Cd6S44+ and Cd2Na2S4+in the sodalite cavities of zeolite A (LTA).

The crystal structure and thermal stability of two cadmium sulfide nanoclusters prepared in zeolite A (LTA) have been studied by XPS, TGA, and single-crystal and powder XRD. The crystal structures of Cd2.4Na3.2(Cd6S4)0.4(Cd2Na2S)0.6(H2O)> or =5.8[Si12Al12O48]-LTA (a = 12.2919(7) A, crystal 1 (hydrated)) and /Cd4Na2(Cd2O)(Na2O)/[Si12Al12O48]-LTA (a = 12.2617(4) A, crystal 2 (dehydrated)) were determined by single-crystal methods in the cubic space group Pm3m at 294(1) K. Crystal 1 was prepared by ion exchange of Na12-LTA in an aqueous stream 0.05 M in Cd2+, followed by washing in a stream of water, followed by reaction in an aqueous stream 0.05 M in Na2S. Crystal 2 was made by dehydrating crystal 1 at 623 K and 1 x 10(-6) Torr for 3 days. In crystal 1, Cd6S4(4+) nanoclusters were found in and extending out of about 40% of the sodalite cavities. Central to each Cd6S4(4+) cluster is a Cd4S4 unit (interpenetrating Cd2+ and S2- tetrahedra with near Td symmetry, Cd-S = 2.997(24) A, Cd-S-Cd = 113.8(12) degrees, and S-Cd-S = 58.1(24) degrees). Each of the two remaining Cd2+ ions bonds radially through a 6-ring of the zeolite framework to a sulfide ion of this Cd4S4 unit (Cd-S = 2.90(8) A). In each of the remaining 60% of the sodalite cavities of crystal 1, a planar Cd2Na2S4+ cluster was found (Cd-S/Na-S = 2.35(5)/2.56(14) A and Cd-S-Cd/Na-S-Na = 122(5)/92(7) degrees). Cd6S4(4+) and Cd2Na2S4+ are stable within the zeolite up to about 700 K in air. Upon vacuum dehydration at 623 K, all sulfur was lost (crystal 2). Instead as anions, only two oxide ions remain per sodalite unit. One bridges between two Cd2+ ions (Cd2O2+, Cd-O = 2.28(3) A) and the other between two Na+ ions (Na2O, Na-O = 2.21(10) A).

Journal Article↗
PubMed2006

Complex zeolite structure solved by combining powder diffraction and electron microscopy.

Many industrially important materials, ranging from ceramics to catalysts to pharmaceuticals, are polycrystalline and cannot be grown as single crystals. This means that non-conventional methods of structure analysis must be applied to obtain the structural information that is fundamental to the understanding of the properties of these materials. Electron microscopy might appear to be a natural approach, but only relatively simple structures have been solved by this route. Powder diffraction is another obvious option, but the overlap of reflections with similar diffraction angles causes an ambiguity in the relative intensities of those reflections. Various ways of overcoming or circumventing this problem have been developed, and several of these involve incorporating chemical information into the structure determination process. For complex zeolite structures, the FOCUS algorithm has proved to be effective. Because it operates in both real and reciprocal space, phase information obtained from high-resolution transmission electron microscopy images can be incorporated directly into this algorithm in a simple way. Here we show that by doing so, the complexity limit can be extended much further. The power of this approach has been demonstrated with the solution of the structure of the zeolite TNU-9 (|H9.3|[Al9.3Si182.7O384]; ref. 10) with 24 topologically distinct (Si,Al) atoms and 52 such O atoms. For comparison, ITQ-22 (ref. 11), the most complex zeolite known to date, has 16 topologically distinct (Si,Ge) atoms.

Journal Article↗
PubMed2006

Molecular conformations of protonated dipropylamine in AlPO4-11, AlPO4-31, SAPO-34, and AlPO4-41 molecular sieves.

The host-guest interactions in AlPO4-11, AlPO4-31, SAPO-34, and AlPO4-41 molecular sieves prepared using the same organic structure-directing agent, i.e., dipropylamine, are investigated by a combination of Raman, 13C and 1H MAS NMR, and computer modeling studies. It was found that the organic molecules trapped within the pores of these four AlPO4-based materials exist as their protonated form and adopt distinct conformations in order to fit well with the pore structure of each host. In particular, the presence of two different types of conformations of protonated dipropylamine in the circular 12-ring channels of AlPO4-31 has been ascertained.

Aluminum Compounds↗
PubMed2005

Si distribution in silicoaluminophosphate molecular sieves with the LEV topology: a solid-state NMR study.

The solid-state NMR evidence that Si atoms are not randomly distributed in microporous SAPO-35 materials with the LEV topology and their distribution is governed by the Si content in synthesis mixtures is presented. It is also shown that the extraction pattern of Si atoms from the two distinct tetrahedral sites of the SAPO-35 framework during the calcination step at elevated temperatures occurs in a nonrandom manner, which can be rationalized by considering the expected strain on each topologically distinct site. The overall results of this study reveal that, when the level of Si substitution in SAPO-35 materials is high enough to produce various heterogeneous Si environments other than Si(4Al) species having P atoms only as second-nearest T-atom neighbors, the oxide composition of the domain preferentially created is aluminosilicate rather than pure silica in nature.

Journal Article↗
PubMed2004

In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology.

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.

Journal Article↗
PubMed2004

Synthesis, structure solution, characterization, and catalytic properties of TNU-10: a high-silica zeolite with the STI topology.

A high-silica zeolite (Si/Al = 7.1) with the STI framework topology, denoted TNU-10, has been synthesized in the presence of 1,4-bis(N-methylpyrrolidinium)butane and Na(+) cations as structure-directing agents, and its structure in the proton form has been refined against laboratory powder X-ray data in space group Fmmm (a = 13.533(1) A, b = 17.925(2) A, c = 17.651(2) A). The space group symmetry is supported by electron diffraction and energy minimization studies. The as-made and proton form of TNU-10 are extensively characterized by elemental and thermal analyses, scanning electron microscopy, N(2) adsorption, multinuclear solid-state NMR, IR, and temperature-programmed desorption of ammonia, and the location of the organic structure-directing agent in the channel system is determined by molecular modeling. The catalytic properties of H-TNU-10 and Co-TNU-10 are evaluated for the skeletal isomerization of 1-butene to isobutene and the selective reduction of NO with methane, respectively. When compared to H-ferrierite, a low selectivity to isobutene is observed for H-TNU-10. However, it is found that Co-TNU-10 exhibits a maximum NO conversion of 93% at 823 K under conditions of high concentrations of methane (16,000 ppm) and water vapor (10%) and in the presence of 2.6% O(2), which is considerable higher than even the value (74%) obtained from Co-ferrierite, known as the best catalyst for this reaction, under the identical conditions.

Journal Article↗