Biomedical subjects

Suying Wei

Publications and source records attributed to Suying Wei.

3 recordsLinked to original sources

PubMed2005

Photochemically patterned poly(methyl methacrylate) surfaces used in the fabrication of microanalytical devices.

We report here the photochemical surface modification of poly(methyl methacrylate), PMMA, microfluidic devices by UV light to yield pendant carboxylic acid surface moieties. Patterns of carboxylic acid sites can be formed from the micrometer to millimeter scale by exposure of PMMA through a contact mask, and the chemical patterns allow for further functionalization of PMMA microdevice surfaces to yield arrays or other structured architectures. Demonstrated here is the relationship between UV exposure time and PMMA surface wettability, topography, surface functional group density, and electroosmotic flow (EOF) of aqueous buffer solutions in microchannels made of PMMA. It is found that the water contact angle on PMMA surfaces decreases from 70 degrees to 24 degrees after exposure to UV light as the result of the formation of carboxylic acid sites. However, upon rinsing with 2-propanol, the water contact angle increases to approximately 80 degrees , and this increase is attributed to changes in surface roughness resulting from removal of low molecular weight PMMA formed from scission events. In addition, the surface roughness and surface coverage of carboxylic acid groups exhibit a characteristic trend with UV exposure time. Electroosmotic flow (EOF) in PMMA microchannels increases upon UV modification and is pH dependent. The possible photolysis mechanism for formation of carboxylic acid groups on PMMA surfaces under the conditions outlined in this work is discussed.

Carboxylic Acids↗

PubMed2005

Resist-free patterning of surface architectures in polymer-based microanalytical devices.

The ability to form patterns of chemically reactive surface functionalities in microanalytical devices using a simple photopatterning approach without the need for photoresist-based methods is described. Direct UV exposure of the surfaces of poly(methyl methacrylate), PMMA, and poly(carbonate), PC, microfluidic devices through optical masks leads to the production of patterns of near monolayer quantities of surface carboxylic acid groups as determined by surface coverage, X-ray photoelectron spectroscopy, and fluorescence microscopy experiments. Formation of the reactive carboxylic acid groups without significant physical (topographical) damage to the polymer device substrates is achieved by use of low UV fluence and exposure times. Modification of the patterned, surface carboxylic acid groups with metals, thermally responsive polymers, and antibodies results in microfluidic devices possessing metallic interconnects and detection electrodes and the ability to capture intact biological cells and proteins from solution.

Methylmethacrylates↗

PubMed2004

Cell transport via electromigration in polymer-based microfluidic devices.

Electrokinetic transport of Escherichia coli and Saccharomyces cerevisiae (baker's yeast) cells was evaluated in microfluidic devices fabricated in pristine and UV-modified poly(methyl methacrylate)(PMMA) and polycarbonate (PC). Chip-to-chip reproducibility of the cell's apparent mobilities (micro(app)) varied slightly with a RSD of approximately 10%. The highest micro(app) for baker's yeast cells was observed in UV-modified PC with 0.5 mM PBS (pH = 7.4), and the lowest was measured in pristine PMMA with 20 mM PBS (pH = 7.4). Baker's yeast in all devices migrated toward the cathode because of their smaller electrophoretic mobility compared to the EOF. In 0.5 mM and 1 mM PBS, E. coli cells migrated toward the anode in all cases, opposite to the direction of the EOF due to their larger electrophoretic mobility. E. coli cells in 20 mM PBS migrated toward the cathode, which indicated that the electrophoretic mobility of E. coli cells decreased at higher ionic strengths. Observed differential migrations of E. coli and baker's yeast cells in appropriately prepared polymer microchips were used as the basis for selective introduction into microfluidic devices of only one type of cell. As a working model, experiments were performed with E. coli and RBCs (red blood cells). RBCs migrated toward the cathode in pristine PMMA with 1 mM and 20 mM PBS (pH = 7.4), opposite to the direction of the E. coli cells. By judicious choice of the buffer concentration in which the cell suspension was prepared and the polymer material, RBCs or E. coli cells were selectively introduced into the microdevice, which was monitored via laser backscatter signals.

Cells↗