PubMed Health⌕ Search

Biomedical subjects

Svend Erik Mathiassen

Publications and source records attributed to Svend Erik Mathiassen.

11 recordsLinked to original sources
PubMed2006

Diversity and variation in biomechanical exposure: what is it, and why would we like to know?

Trends in global working life suggest that the occurrence of jobs characterized by long-lasting low-level loads or repetitive operations is increasing. More physical "variation" is commonly believed to be a remedy against musculoskeletal disorders in such jobs. One aim of the present paper was to shortly review the validity of this conviction. An examination of the available epidemiologic literature pointed out that the effectiveness of initiatives like job rotation or more breaks is weakly supported by empirical evidence, and only for short-term psychophysical outcomes. Only a limited number of studies have been devoted to physical variation, and concepts and metrics for variation in biomechanical exposure are not well developed. Thus, as a second objective, the paper proposes a framework for investigating and evaluating aspects of exposure variation, based on explicit definitions of variation as "the change in exposure across time" and diversity as "the extent that exposure entities differ". Operational methods for assessing these concepts are also discussed.

Biomechanical Phenomena↗
PubMed2005

On the evolution of task-based analysis of manual materials handling, and its applicability in contemporary ergonomics.

The industrial revolution significantly changed the way work was organized and analyzed by the introduction and widespread implementation of the division of labor philosophy. This philosophy has continued to dominate work design, and has evolved beyond the factory to include many facets of service industries, and even professional occupations. The analysis of manual work, particularly materials handling tasks, remains an active domain of ergonomics research and practice. Many of the task-analytic tools used for workplace analysis are rooted in the philosophy of dividing work into elements, analyzing the individual elements, and synthesizing the results into conclusions about the entire job, including the risk of contracting musculoskeletal disorders (MSDs). The authors discuss the notion that the nature of modern work, which is characterized by multiple tasks in a complex time pattern, and the complex nature of MSDs, which are influenced by biomechanical as well as psychological, political, and economic factors, may limit the effectiveness of classical task analytic techniques in preventing MSDs.

Ergonomics↗
PubMed2005

An evaluation of methods assessing the physical demands of manual lifting in scaffolding.

Four methods assessing the physical demands of manual lifting were compared. The scaffolding job was evaluated and three distinct scaffolding tasks were ranked using: (1) the revised NIOSH lifting equation (NIOSH method), (2) lifting guidelines for the Dutch construction industry (Arbouw method), (3) rapid appraisal of the NIOSH lifting equation (practitioners' method), and (4) systematic observations. For the three first-mentioned methods the same dataset was used; observation took place in a different setting in the same company. At job level, all methods indicated that ergonomic interventions are required to protect scaffolders from an increased risk for low back pain. The NIOSH, Arbouw and practitioners' method resulted in a similar ranking order of tasks (transport>construction>dismantlement). In contrast, the observational method gave transport the lowest ranking. The underlying cause was probably that the observational method is more sensitive to durations of tasks and lifting within tasks than the three other methods.

Adult↗
PubMed2005

An integrated analysis of ergonomics and time consumption in Swedish 'craft-type' car disassembly.

Car disassembly is at the edge of extensive rationalization due to increased legislative demands for recycling. This study focused on (1) assessing current mechanical exposures (physical work loads) for comparison with future rationalised systems, with particular emphasis on time aspects, (2) analysing disassembly work in terms of time consumption and exposures in constituent tasks as defined by a loss analysis technique, and (3) predicting the consequences of car disassembly rationalisation for mechanical exposures. The study showed that disassembly implied pronounced circulatory loads, and that more walking and higher lumbar peak loads were found than in studies of assembly work. Value-adding tasks comprised 30% of the total working time, and implied higher postural exposures for the head, arm, trunk and wrist, as well as less opportunities to recover, as compared to non-value-adding tasks. Organisational-type rationalization can be expected to increase the time spent in value-adding work, thus increasing local exposures for the average worker, while a concurrent increase in mechanization level might reduce circulatory exposures, the amount of walking, and peak lumbar loads.

Automobiles↗
PubMed2005

Task-based estimation of mechanical job exposure in occupational groups.

OBJECTIVES: This study examined the validity of a common belief in epidemiology with respect to work-related musculoskeletal disorders, that individual mechanical job exposure is better estimated from tasks performed in the job than from the mean exposure of the occupational group. METHODS: Whole-day recordings of upper trapezius electromyography were obtained from 24 cleaners and 23 office workers. Trapezius activity was analyzed in the level (gap time) and frequency (jerk time) dimensions. On the same day, the job of each person was divided into periods of active work and breaks by means of continuous observations. The bootstrap re-sampling technique was used with this database to compare task-based job exposure estimates with estimates based on the occupational mean. For a particular person, the task-based estimate was obtained by combining the average work and break exposures in the occupation with the personal time proportions of the two tasks in the job. RESULTS: The task-based estimates were, in general, equivalent to, or less correct than, occupation-based estimates for both exposure parameters in both occupations and for individual exposures, as well as for group means. This was the result in spite of significant and consistent exposure differences between work and breaks, in particular among the cleaners. CONCLUSIONS: Even if task exposure contrasts are large, task-based estimates of job exposures can be less correct than estimates based on the occupational mean. Since collecting and processing task information is costly, it is recommended that task-based modeling of mechanical exposure be implemented in studies only after careful examination of its possible benefits.

Bias↗
PubMed2004

Job enlargement and mechanical exposure variability in cyclic assembly work.

Cyclic assembly work is known to imply a high risk for musculoskeletal disorders. To have operators rotate between work tasks is believed to be one way of decreasing this risk, since it is expected to increase variation in mechanical and psychological exposures (physical and mental loads). This assumption was investigated by assessing mechanical exposure variability in three assembly tasks in an electronics assembly plant, each on a separate workstation, as well as in a 'job enlargement' scenario combining all three stations. Five experienced operators worked for 1 h on each station. Data on upper trapezius and forearm extensor muscle activity were obtained by means of electromyography (EMG), and working postures of the head and upper arms were assessed by inclinometry. The cycle-to-cycle variance of parameters representing the three exposure dimensions: level, frequency and duration was estimated using ANOVA algorithms for each workstation separately as well as for a balanced combination of all three. For a particular station, the variability of trapezius EMG activity levels relative to the mean was higher than for extensor EMG: between-cycles coefficients of variation (CV) about 0.15 and 0.10, respectively. A similar relationship between CV applied to the parameter describing frequency of EMG activity. Except for head inclination levels, the between-cycles CV was larger for posture parameters than for EMG. The between-cycles variance increased up to six fold in the job enlargement scenario, as compared to working at only one station. The difference in mean exposure between workstations was larger for trapezius EMG parameters than for forearm extensor EMG and postures, and hence the effect of job enlargement on exposure variability was more pronounced for the trapezius. For some stations, job enlargement even implied less cycle-to-cycle variability in forearm extensor EMG parameters than working at that station only. Whether the changes in exposure variability associated with job enlargement were sufficient to imply a decreased risk for musculoskeletal disorders is not known.

Adult↗
PubMed2004

Work above shoulder level and degenerative alterations of the rotator cuff tendons: a magnetic resonance imaging study.

OBJECTIVE: To determine whether work performed with the arms in a highly elevated position is associated with alterations in the rotator cuff tendons as assessed by magnetic resonance imaging (MRI). METHODS: A cross-sectional study was performed in a historical cohort of male machinists, car mechanics, and house painters. The participants were right-handed, ages 40-50 years, and had been employed in their trades for not less than 10 years. Seventy-one percent of invited subjects participated (136 of 192). Lifetime upper arm elevation was assessed by direct measurements combined with individual work histories obtained by questionnaire and from registry data. Supraspinatus tendinopathy was evidenced by MRI signal intensity changes and morphologic alterations. Infraspinatus and subscapularis tendinopathy were also assessed. Additional outcomes were acromioclavicular joint degeneration and humeral head cysts. The MRI findings were evaluated by radiologists who were blinded to exposure status and symptoms. RESULTS: An exposure-response relationship was found between lifetime upper arm elevation and supraspinatus tendinopathy, with an age-adjusted odds ratio of 1.27 (95% confidence interval 1.02-1.60) for a 5-month increase in the total number of full-time working months spent with the arm elevated >90 degrees . CONCLUSION: Work with the arms in a highly elevated position is associated with MRI-diagnosed alterations in the supraspinatus tendon. By demonstrating the first part of a possible biologic pathway, the study corroborates the work-relatedness of rotator cuff disorders.

Adult↗
PubMed2003

Variability in mechanical exposure within and between individuals performing a highly constrained industrial work task.

Data on exposure variability is an important remedy for designing and interpreting studies of occupational ergonomics. The present study aimed at retrieving the within- and between-subjects variance of several mechanical exposure parameters in a repeated, short-cycle task. Seven experienced operators repeatedly secured joints using two types of hand-held nutrunners. The joints were placed in three different locations on a rack, simulating automotive assembly. Bilateral muscle activity from the upper trapezius and the lower arm extensors, as well as head and upper arm inclination was continuously monitored. Exposure levels and their variance components were assessed in several data subsets using ANOVA. The results were interpreted in terms of statistical precision and power, and discussed as markers of important ergonomic qualities. A substantial exposure variability was found within and between subjects in all joint locations and for both tools. For mixed work across tools and locations, the necessary number of subjects to arrive at a group mean exposure with 95% confidence limits corresponding to +/- 10% of the mean ranged between 8 and 158, with posture recordings tending to require smaller populations than muscle activity recordings. Within-subject variance increased 2- to 37-fold, depending on exposure parameter, when work was 'enlarged' from securings with a specified location and tool to a mix of all locations and tools. Systematic differences between subjects in variability and responsiveness to 'work enlargement' indicated individualized motor control strategies. The results illustrate the importance of exposure variability data to the design of proper measurement strategies. They also suggest that the sizes of exposure variability per se can be interpreted as operational indices of what is thought to be important ergonomic risk indicators, such as the 'sameness' of repeated operations and the allowance for flexible working techniques.

Adult↗
PubMed2002

Statistical power and measurement allocation in ergonomic intervention studies assessing upper trapezius EMG amplitude. A case study of assembly work.

The present study aimed at exploring the statistical power of ergonomic intervention studies using electromyography (EMG) from the upper trapezius muscle. Data from a previous study of cyclic assembly work were reanalyzed with respect to exposure variability between subjects, between days, and within days. On basis of this information, the precision and power of different data collection strategies were explored. A sampling strategy comprising four registrations of about two min each (i.e. two work cycles) for one day per subject resulted in coefficients of variation between subjects on the 10-, 50-, and 90-APDF-percentiles of 0.44, 0.31, and 0.29, respectively. The corresponding necessary numbers of subjects in a study aiming at detecting a 20% exposure difference between two independent groups of equal size were 154, 78, and 68, respectively (p< or = 0.05, power 0.80). Multiple measurement days per subject would improve power, but only to a marginal extent beyond 4 days of recording. Increasing the number of recordings per day would have minor effects. Bootstrap resampling of the data set revealed that estimates of variability and power were associated with considerable uncertainty. The present results in combination with an overview of other occupational studies showed that common-size investigations using trapezius EMG percentiles are at great risk of suffering from insufficient statistical power, even if the expected intervention effect is substantial. The paper suggests a procedure of how to retrieve and use exposure variability information as an aid when studies are planned, and how to allocate measurements efficiently.

Data Interpretation, Statistical↗
PubMedDate not supplied

Efficient one-day sampling of mechanical job exposure data--a study based on upper trapezius activity in cleaners and office workers.

This ergonomics exposure assessment study compared the efficiency of eight 1-day-only strategies, that is, the relationship between the number of data collected per subject and the precision of the resulting mean exposure estimate. Whole-day electromyographic recordings from the right upper trapezius muscle in 24 cleaners and 23 office workers were processed to give minute-by-minute values of gap time and jerk time-parameters representing the level and frequency dimensions of muscle activation, respectively. On-site observations provided data on time spent in each of eight exhaustive task categories in the job, seven of which were associated with activities during work, and the last comprising breaks. On average, sampling at fixed intervals without regard to tasks doubled efficiency as compared with random sampling, which in turn was several times as efficient as consecutive sampling. Stratified sampling according to the two broad categories, work and breaks, increased efficiency for random and fixed-interval sampling, but the gain was distinct only among cleaners (about 20%). The commonly used strategy in ergonomic studies of sampling consecutively for short periods within tasks was highly inefficient. Further classification of work into the seven subcategories resulted in marginal additional increases in efficiency; on average less than 2%. A decision algorithm is given for determining appropriate sampling strategies in different types of jobs.

Adult↗