PubMed Health⌕ Search

Biomedical subjects

T Atkinson

Publications and source records attributed to T Atkinson.

At least 109 records · Page 6Linked to original sources

A specific, highly active malate dehydrogenase by redesign of a lactate dehydrogenase framework.

Three variations to the structure of the nicotinamide adenine dinucleotide (NAD)-dependent L-lactate dehydrogenase from Bacillus stearothermophilus were made to try to change the substrate specificity from lactate to malate: Asp197----Asn, Thr246----Gly, and Gln102----Arg). Each modification shifts the specificity from lactate to malate, although only the last (Gln102----Arg) provides an effective and highly specific catalyst for the new substrate. This synthetic enzyme has a ratio of catalytic rate (kcat) to Michaelis constant (Km) for oxaloacetate of 4.2 x 10(6)M-1 s-1, equal to that of native lactate dehydrogenase for its natural substrate, pyruvate, and a maximum velocity (250 s-1), which is double that reported for a natural malate dehydrogenase from B. stearothermophilus.

Binding Sites↗

Effect of bile salts and of fusidic acid on HIV-1 infection of cultured cells.

Bile salts completely inactivated human immunodeficiency virus type 1 (HIV-1) in vitro and, unexpectedly, completely destroyed all the cultured persistently HIV-1 infected T cells. Fusidic acid, which likewise possesses the properties of an anionic surfactant, inactivated HIV-1 only at concentrations toxic to uninfected cultured cells. Bile salts or their derivatives, and other anionic surfactants, could be of therapeutic value in HIV-1 infections.

Acquired Immunodeficiency Syndrome↗

An investigation of the contribution made by the carboxylate group of an active site histidine-aspartate couple to binding and catalysis in lactate dehydrogenase.

The influence of aspartate-168 on the proton-donating and -accepting properties of histidine-195 (the active site acid/base catalyst in lactate dehydrogenase) was evaluated by use of site-directed mutagenesis to change the residue to asparagine and to alanine. Despite the fact that asparagine could form a hydrogen bond to histidine while alanine could not, the two mutant enzymes have closely similar catalytic and ligand-binding properties. Both bind pyruvate and its analogue (oxamate) 200 times more weakly than the wild-type enzyme but show little disruption in their binding of lactate and its unreactive analogue, trifluorolactate. Neither mutation alters the binding of coenzymes (NADH and NAD+) or the pK of the histidine-195 residue in the enzyme-coenzyme complex. We conclude that a strong histidine-aspartate interaction is only formed when both coenzyme and substrate are bound. Deletion of the negative charge of aspartate shifts the equilibrium between enzyme-NADH-pyruvate (protonated histidine) and enzyme-NAD+-lactate (unprotonated histidine) toward the latter. In contrast to the wild-type enzyme, the rate of catalysis in both directions in the mutants is limited by a slow hydride ion transfer step.

Aspartic Acid↗

The use of genetically engineered tryptophan to identify the movement of a domain of B. stearothermophilus lactate dehydrogenase with the process which limits the steady-state turnover of the enzyme.

A general technique for monitoring the intramolecular motion of a protein is described. Genetic engineering is used to replace all the natural tryptophan residues with tyrosine. A single tryptophan residue is then inserted at a specific site within the protein where motion is then detected from the fluorescence characteristics of this fluorophore. This technique has been used in B. stearothermophilus lactate dehydrogenase mutant (W80Y, W150Y, W203Y, G106W) to correlate the slow closure of a surface loop of polypeptide (residues 98-110) with the maximum catalytic velocity of the enzyme.

Genetic Engineering↗

Determination of protein size in chromatography column eluants by on-line photon correlation spectroscopy.

The dynamic light scattering technique of photon correlation spectroscopy has been used to determine biomacromolecule hydrodynamic radius in solutions flowing at rates similar to those experienced in liquid chromatographic separation systems. Such analyses can be performed rapidly (less than 5 s). The potential of the technique as an on-line noninvasive monitor for liquid chromatography is discussed.

Light↗

The engineering of a more thermally stable lactate dehydrogenase by reduction of the area of a water-accessible hydrophobic surface.

A site-directed mutant of Bacillus stearothermophilus lactate dehydrogenase (lactate:NAD+ oxidoreductase, EC 1.1.1.27) has been engineered in which the conserved hydrophobic residue isoleucine-250 has been replaced by the more hydrophilic residue asparagine. This isoleucine forms a large part of a water-accessible, hydrophobic surface in the active site of the apo-enzyme which is covered by the B-face of the nicotinamide ring when coenzymes are bound. Reduction in the area of this hydrophobic surface results in the mutant tetramer being more thermally stable than the wild-type enzyme.

Binding Sites↗

Rational construction of a 2-hydroxyacid dehydrogenase with new substrate specificity.

Using site-directed mutagenesis on the lactate dehydrogenase gene from Bacillus stearothermophilus, three amino acid substitutions have been made at sites in the enzyme which we suggest in part determine specificity toward different hydroxyacids (R-CHOH-COOH). To change the preferred substrates from the pyruvate/lactate pair (R = -CH3) to the oxaloacetate/malate pair (R = -CH2-COO-), the volume of the active site was increased (thr 246----gly), an acid was neutralized (asp-197----asn) and a base was introduced (gln-102 - greater than arg). The wild type enzyme has a catalytic specificity for pyruvate over oxaloacetate of 1000 whereas the triple mutant has a specificity for oxaloacetate over pyruvate of 500. Despite the severity and extent of these active site alterations, the malate dehydrogenase so produced retains a reasonably fast catalytic rate constant (20 s-1 for oxaloacetate reduction) and is still allosterically controlled by fructose-1,6-bisphosphate.

Alcohol Oxidoreductases↗

A strong carboxylate-arginine interaction is important in substrate orientation and recognition in lactate dehydrogenase.

Using site-directed mutagenesis, Arginine-171 at the substrate-binding site of Bacillus stearothermophilus, lactate dehydrogenase has been replaced by lysine. In the closely homologous eukaryotic lactate dehydrogenase, this residue binds the carboxylate group of the substrate by forming a planar bifurcated bond. The mutation diminishes the binding energy of pyruvate, alpha-ketobutyrate and alpha-ketovalerate (measured by kcat/Km) by the same amount (about 6 kcal/mol). For each additional methylene group on the substrate, there is a loss of about 1.5 kcal/mol of binding energy in both mutant and wild-type enzymes. From these parallel trends in the two forms of enzyme, we infer that the mode of productive substrate binding is identical in each, the only difference being the loss of a strong carboxylate-guanidinium interaction in the mutant. In contrast to this simple pattern in kcat/Km, the Km alone increases with substrate-size in the wild-type enzyme, but decreases in the mutant. These results can be most simply explained by the occurrence of relatively tight unproductive enzyme-substrate complexes in the mutant enzyme as the substrate alkyl chain is extended. This does not occur in the wild-type enzyme, because the strong orienting effect of Arg-171 maximizes the frequency of substrates binding in the correct alignment.

Arginine↗

The inhibition of glucokinase and glycerokinase from Bacillus stearothermophilus by the triazine dye Procion Blue MX-3G.

Glucokinase from Bacillus stearothermophilus was irreversibly inactivated by the reactive dichlorotriazinyl dye Procion Blue MX-3G at pH 8.0. The enzyme was protected from inactivation by the substrate MgATP. Kinetic data implied that the dye occupied the MgATP-binding site. The apparent Km values for MgATP and D-glucose were found to be 70 microM and 210 microM respectively, and the Kd of the pure reactive dye was 16 microM; 1 mol of the pure reactive dye bound to 1 mol of glucokinase subunit. The dye was shown to have potential as an affinity probe for glucokinase. Glycerokinase from the same bacterium was inactivated by Procion Blue MX-3G at high concentrations (5 mM), but only after a period of increased enzyme activity. Kinetic data indicated that the dye preferentially attacked the glycerol-binding site. The apparent Km values for MgATP and glycerol were found to be 38 microM and 13 microM respectively, and 4 mol of reactive dye could be bound to 1 mol of glycerokinase subunit. This was surprising in view of the MgATP-dependent elution of glycerokinase from immobilized Procion Blue MX-3G.

Binding Sites↗

The importance of arginine 171 in substrate binding by Bacillus stearothermophilus lactate dehydrogenase.

A variant of lactate dehydrogenase from Bacillus stearothermophilus has been engineered by site-directed mutagenesis in which an active-site arginine residue at position 171 in the protein sequence is replaced by lysine. Replacement of this arginine by lysine has no effect on co-enzyme binding, a relatively small effect on the rate of turnover of the enzyme, but causes a 2000-fold increase in the Michaelis constant for pyruvate, a 6000-fold increase in the dissociation constant for oxamate and results in a Michaelis constant for lactate which is too high to measure. The decrease in binding energy for these carboxylate-containing substrates caused by this mutation is very large, around 5.5 kcal.mol-1 and in part, is explained by the small increase in the distance of a lysine-substrate carboxylate interaction at this site and the absence of the additional hydrogen bond from a two-point arginine-carboxylate interaction. Consistent with this last observation, the ability of this mutant enzyme to stabilize an NAD+-sulphite compound in its active site (an alternative enzyme-substrate complex which does not involve bifurcated bonding to arginine) is only reduced 14-fold.

Amino Acid Sequence↗

Amino acid sequence of the L-lactate dehydrogenase of Bacillus caldotenax deduced from the nucleotide sequence of the cloned gene.

The Bacillus caldotenax L-lactate dehydrogenase gene (lct) has been cloned into Escherichia coli, using the Bacillus stearothermophilus lct gene as a hybridisation probe, and its complete nucleotide sequence determined. The lct structural gene consists of an open reading frame of 951 base pairs commencing with an ATG start codon and followed by a TAA stop codon. Upstream of the gene are putative transcriptional promoter -35 and -10 regions; a ribosome binding site with a predicted delta G of -66.9 kJ/mol is also present six base pairs upstream of the ATG start codon. The B. caldotenax lct gene is highly homologous to the B. stearothermophilus lct gene displaying a DNA sequence homology of 89.7%. Examination of the DNA sequence 3' of the lct gene revealed the presence of two further open reading frames. This suggests that the lct gene may be the first gene of an operon. The deduced amino acid sequence of the L-lactate dehydrogenase (LDH) from B. caldotenax predicted a protein of 317 amino acid residues; comparison with the B. stearothermophilus enzyme revealed only 30 amino acid differences between the two enzymes; thus the enzymes are 90.4% homologous. These amino acid differences must account for the different thermostabilities of the two enzymes. The B. caldotenax lct gene was efficiently expressed in E. coli and the original lct-containing plasmid construct isolated (pKD1) induced the synthesis of LDH at a level of 4.5% of the E. coli soluble cell protein whilst a SmaI subfragment of this clone, (pKD2) produced LDH at a level of 6.9% of the E. coli soluble cell protein. LDH isolated from E. coli cells had the same thermal stability properties as LDH isolated from B. caldotenax cells.

Amino Acid Sequence↗

The use of site-directed mutagenesis and time-resolved fluorescence spectroscopy to assign the fluorescence contributions of individual tryptophan residues in Bacillus stearothermophilus lactate dehydrogenase.

Site-directed mutagenesis has been used to generate two mutant Bacillus stearothermophilus lactate dehydrogenases: in one, Trp-150 has been replaced with a tyrosine residue and, in the other, both Trp-150 and -80 are replaced with tyrosines. Both enzymes are fully catalytically active and their affinities for substrates and coenzymes, and thermal stabilities are very similar to those of the native enzyme. Time-resolved fluorescence measurements using a synchrotron source have shown that all three tryptophans in the native enzyme fluoresce. By comparing the mutant and native enzymes it was possible, for the first time, to assign, unambiguously, lifetimes to the individual tryptophans: Trp-203 (7.4 ns), Trp-80 (2.35 ns) and Trp-150 (less than 0.3 ns). Trp-203 is responsible for 75-80% of the steady-state fluorescence emission, Trp-80 for 20%, and Trp-150 for less than 2%.

Animals↗

A single amino acid substitution deregulates a bacterial lactate dehydrogenase and stabilizes its tetrameric structure.

We have engineered a variant of the lactate dehydrogenase enzyme from Bacillus stearothermophilus in which arginine-173 at the proposed regulatory site has been replaced by glutamine. Like the wild-type enzyme, this mutant undergoes a reversible, protein-concentration-dependent subunit assembly, from dimer to tetramer. However, the mutant tetramer is much more stable (by a factor of 400) than the wild type and is destabilized rather than stabilized by binding the allosteric regulator, fructose 1,6-biphosphate (Fru-1,6-P2). The mutation has not significantly changed the catalytic properties of the dimer (Kd NADH, Km pyruvate, Ki oxamate and kcat), but has weakened the binding of Fru-1,6-P2 to both the dimeric and tetrameric forms of the enzyme and has almost abolished any stimulatory effect. We conclude that the Arg-173 residue in the wild-type enzyme is directly involved in the binding of Fru-1,6-P2, is important for allosteric communication with the active site, and, in part, regulates the state of quaternary structure through a charge-repulsion mechanism.

Allosteric Regulation↗

The isolation of a peptide from the catalytic domain of Bacillus stearothermophilus tryptophyl-tRNA synthetase. The interaction of Brown MX-5BR with tyrosyl-tRNA synthetase.

Tryptophyl-tRNA synthetase is irreversibly inactivated by Procion Brown MX-5BR with an apparent dissociation constant (KD) of 8.8 microM and maximum rate of inactivation k3 0.192 s-1. The specificity of the interaction is supported by two previously reported observations. Firstly, Brown MX-5BR inactivation of tryptophyl-tRNA synthetase is inhibited by substrates, and secondly, the animated derivative of Brown MX-5BR is a competitive inhibitor of tryptophyl-tRNA synthetase with a Ki of 2 X 10(-4) M with respect to both tryptophan and ATP. Tryptic digestion of the dye-affinity-labelled enzyme and subsequent resolution of the peptides by h.p.l.c. yielded one major dye-peptide peak. Amino acid sequence analysis resulted in the identification of the dye-binding domain centred on lysine-178. Tyrosyl-tRNA synthetase is also inactivated by Procion Brown MX-5BR, and this inactivation is prevented by ATP but not by tyrosine. The interaction of tyrosyl-tRNA synthetase with hydroxylated Brown MX-5BR exhibited non-competitive kinetics with respect to the amino acid-binding site and competitive kinetics against ATP with a Ki of 6 X 10(-6) M.

Amino Acid Sequence↗