PubMed Health⌕ Search

Biomedical subjects

T E Bunch

Publications and source records attributed to T E Bunch.

12 recordsLinked to original sources

Impact event at the Permian-Triassic boundary: evidence from extraterrestrial noble gases in fullerenes.

The Permian-Triassic boundary (PTB) event, which occurred about 251.4 million years ago, is marked by the most severe mass extinction in the geologic record. Recent studies of some PTB sites indicate that the extinctions occurred very abruptly, consistent with a catastrophic, possibly extraterrestrial, cause. Fullerenes (C60 to C200) from sediments at the PTB contain trapped helium and argon with isotope ratios similar to the planetary component of carbonaceous chondrites. These data imply that an impact event (asteroidal or cometary) accompanied the extinction, as was the case for the Cretaceous-Tertiary extinction event about 65 million years ago.

Animals↗

Fullerenes: an extraterrestrial carbon carrier phase for noble gases.

In this work, we report on the discovery of naturally occurring fullerenes (C60 to C400) in the Allende and Murchison meteorites and some sediment samples from the 65 million-year-old Cretaceous/Tertiary boundary layer (KTB). Unlike the other pure forms of carbon (diamond and graphite), fullerenes are extractable in an organic solvent (e.g., toluene or 1,2,4-trichlorobenzene). The recognition of this unique property led to the detection and isolation of the higher fullerenes in the Kratschmer/Huffmann arc evaporated graphite soot and in the carbon material in the meteorite and impact deposits. By further exploiting the unique ability of the fullerene cage structure to encapsulate and retain noble gases, we have determined that both the Allende and Murchison fullerenes and the KTB fullerenes contain trapped noble gases with ratios that can only be described as extraterrestrial in origin.

Carbon↗

Fullerenes, fulleranes and polycyclic aromatic hydrocarbons in the Allende meteorite.

In this paper, we confirm our earlier observations of fullerenes (C60 and C70) in the Allende meteorite (Becker et al., 1994a, 1995). Fullerene C60 was also detected in two separate C-rich (approximately 0.5-1.0%) dark inclusions (Heymann et al., 1987) that were hand picked from the Allende sample. The amounts of C60 detected were approximately 5 and approximately 10 ppb, respectively, which is considerably less than what was detected in the Allende 15/21 sample (approximately 100 ppb; Becker et al., 1994a, 1995). This suggests that fullerenes are heterogeneously distributed in the meteorite. In addition, we present evidence for fulleranes, (C60Hx), detected in separate samples by laser desorption (reflectron) time-of-flight (TOF) mass spectrometry (LDMS). The LDMS spectra for the Allende extracts were remarkably similar to the spectra generated for the synthetic fullerane mixtures. Several fullerane products were synthesized using a Rh catalyst (Becker et al., 1993a) and separated using high-performance liquid chromatography (HPLC). Polycyclic aromatic hydrocarbons (PAHs) were also observed ppm levels) that included benzofluoranthene and corannulene, a cup-shaped molecule that has been proposed as a precursor molecule to the formation of fullerenes in the gas phase (Pope et al., 1993).

Carbon↗

Fullerenes in the 1.85-billion-year-old Sudbury impact structure.

Fullerenes (C60 and C70) have been identified by laser desorption, laser desorption post-ionization, and high-resolution electron-impact mass spectrometry in shock-produced breccias (Onaping Formation) of the Sudbury impact structure in Ontario, Canada. The C60 isotope is present at a level of a few parts per million. The fullerenes were likely synthesized within the impact plume from the carbon contained in the bolide. The oxidation of the fullerenes during the 1.85 billion years of exposure was apparently prevented by the presence of sulfur in the form of sulfide-silicate complexes associated with the fullerenes.

Carbon↗

Fullerenes in an impact crater on the LDEF spacecraft.

The fullerenes C60 and C70 have been found to occur naturally on Earth and have also been invoked to explain features in the absorption spectra of interstellar clouds. But no definitive spectroscopic evidence exists for fullerenes in space and attempts to find fullerenes in carbonaceous chondrites have been unsuccessful. Here we report the observation of fullerenes associated with carbonaceous impact residue in a crater on the Long Duration Exposure Facility (LDEF) spacecraft. Laser ionization mass spectrometry and Raman spectroscopy indicate the presence of fullerenes in the crater and in adjacent ejecta. Man-made fullerenes survive experimental hypervelocity (approximately 6.1 km s-1) impacts into aluminium targets, suggesting that space fullerenes contained in a carbonaceous micrometeorite could have survived the LDEF impact at velocities towards the lower end of the natural particle encounter range (<13 km s-1). We also demonstrate that the fullerenes were unlikely to have formed as instrumental artefacts, nor are they present as contaminants. Although we cannot specify the origin of the fullerenes with certainty, the most plausible source is the chondritic impactor. If, alternatively, the impact produced the fullerenes in situ on LDEF, then this suggests a viable mechanism for fullerene production in space.

Aluminum↗

Secondary processing of chondrules and refractory inclusions (CAIs) by gasdynamic heating.

A theoretical model of aerodynamic heating of a meteoric particle upon entry into a parent body atmosphere is presented. The model includes the effects of melting, vaporization, and heat conduction into the particle interior. Properties of chondrule rims are interpreted in the context of the model. We conclude that the formation of true melt rims by atmospheric entry requires that a low-melting-temperature component be fractionated in the outer part of the chondrule prior to rim formation, and that the range of thermal alteration effects observed in UOC chondrites reflects the variety of encounter conditions and chondrite types. Further tests of the model are suggested.

Atmosphere↗

Are some chondrule rims formed by impact processes? Observations and experiments.

Observations and experimental evidence are presented to support the hypothesis that high-speed impact into a parent body regolith can best explain certain textures and compositions observed for rims on some chondrules. A study of 19 interclastic rimmed chondrules in the Weston (H 3/4) ordinary chondrite shows that two main rim types are present on porphyritic olivine-pyroxene (POP) and porphyritic pyroxene (PP) chondrules: granular and opaque rims. Granular rims are composed of welded, fine-grained host chondrule fragments. Bulk compositions of granular rims vary among chondrules, but each rim is compositionally dependent on that of the host chondrule. Opaque rims contain mineral and glass compositions distinctly different from those of the host, partially reacted chondrule mantle components, and some matrix grains. Opaque rims are greatly enriched in FeO (up to 63 wt%). The original chondrule pyroxene compositional zonation patterns and euhedral grain outlines are discontinuous at the chondrule/rim interface. Opaque rims are dominated by fayalitic olivine (Fa92-56), with high Al2O3 content (0.78-3.15%), which makes them distinctly different from primary olivine, but similar to Fe-olivine in chondrule rims of other meteorites. Thin zones of chondrule minerals adjacent to the present rims are intermediate in FeO content between the Mg-rich interior and the Fe-rich rim, which indicates a reaction relationship. Regardless of conclusions drawn regarding other types of rims, granular and opaque rim characteristics appear to be inconsistent with nebular condensation, in that host and matrix fragments are included within the rim. We have initiated a series of experiments, using the Ames two-stage light gas gun, to investigate the hypothesis that the Weston chondrule rims are the result of thermal and mechanical alteration upon impact into a low-density medium. Clusters of approximately 200-micron-sized silicate particles were fired into aerogel (density = 0.1 g cm-3) at velocities of 5.6, 4.7, and 2.2 km sec-1. Recovered grains show characteristics that range from fragmented projectile grains mixed with melted aerogel that nearly rim the grains to grains that have melted aerogel clumps mixed with partially melted projectile. These experimental results demonstrate that rim-like thermal and mechanical alteration of projectiles can result from a high-velocity encounter with a low-density target. Therefore, experiments using appropriately chosen projectile and target materials can provide a test of the hypothesis that chondrule rims common to Weston and possibly other ordinary chondrites were formed by such a process.

Astronomical Phenomena↗

Processing of refractory meteorite inclusions (CAIs) in parent-body atmospheres.

The refractory meteorite inclusions known as CAIs (calcium-aluminum rich inclusions) display melted rims that were produced by thermal events of only a few seconds duration. We show that gas dynamic deceleration in a temporary atmosphere around an accreting parent body, produced by gas release during accretion, could provide a regime of sufficiently high gas density and small scale height to achieve partial melting of the CAIs. In addition, the presence of dust in the atmosphere would increase the gradient of pressure with height (i.e., effectively reduce the scale height), lower the rate of blowoff (thus keeping more gas around the body), as well as allow dust particles to become trapped in the partially melted material as is observed in some cases. Thus, CAIs may be regarded as probes of a primitive atmosphere by virtue of the thermal and mineralogical alteration that occurred upon their passage through the atmosphere.

Aluminum↗

The nature and origin of interstellar diamond.

Microscopic diamond was recently discovered in oxidized acid residues from several carbonaceous chondrite meteorites (for example, the C delta component of the Allende meteorite). Some of the reported properties of C delta seem in conflict with those expected of diamond. Here we present high spatial resolution analytical data which may help to explain such results. The C delta diamond is an extremely fine-grained (0.5-10 nm) single-phase material, but surface and interfacial carbon atoms, which may comprise as much as 25% of the total, impart an 'amorphous' character to some spectral data. These data support the proposed high-pressure conversion of amorphous carbon and graphite into diamonds due to grain-grain collisions in the interstellar medium although a low-pressure mechanism of formation cannot be ruled out.

Carbon↗