PubMed Health⌕ Search

Biomedical subjects

T E Cowan

Publications and source records attributed to T E Cowan.

13 recordsLinked to original sources
PubMed2006

Dynamics of mass transport and magnetic fields in low-wire-number-array Z pinches.

The dynamics of mass transport were observed in a wire array implosion with multiframe laser probing. Plasma bubbles arise at breaks in the wires. Interferometry shows that the leading edge of the bubbles brings material to the axis of the array. The speed of this material was measured to be > or =3 x 10(7) cm/s during the wire array implosion. A shock was observed during the collision of the bubbles with the precursor. The Faraday effect indicates current flowing in breaks on the wires. The current switches from the imploding mass to the on-axis plasma column at the beginning of the x-ray pulse.

Journal Article↗
PubMed2005

Ultraintense laser-produced fast-electron propagation in gas jets.

We study the propagation of fast electrons in a gas at different densities. A large relativistic electron current is produced by focusing a short-pulse ultrahigh-intensity laser on a metallic target. It then propagates in a gas jet placed behind the foil. Shadowgraphy in the gas shows an electron cloud moving at sub-relativistic average velocities. The experiment shows (i) the essential role of the density of background material for allowing propagation of fast electrons, (ii) the importance of the ionization phase which produces free electrons available for the return current, and (iii) the effect of electrostatic fields on fast-electron propagation.

Journal Article↗
PubMed2005

Comparison of laser ion acceleration from the front and rear surfaces of thin foils.

The comparative efficiency and beam characteristics of high-energy ions generated by high-intensity short-pulse lasers (approximately 1-6 x 10(19) W/cm2) from both the front and rear surfaces of thin metal foils have been measured under identical conditions. Using direct beam measurements and nuclear activation techniques, we find that rear-surface acceleration produces higher energy particles with smaller divergence and a higher efficiency than front-surface acceleration. Our observations are well reproduced by realistic particle-in-cell simulations, and we predict optimal criteria for future applications.

Journal Article↗
PubMed2004

Plasma devices to guide and collimate a high density of MeV electrons.

The development of ultra-intense lasers has facilitated new studies in laboratory astrophysics and high-density nuclear science, including laser fusion. Such research relies on the efficient generation of enormous numbers of high-energy charged particles. For example, laser-matter interactions at petawatt (10(15) W) power levels can create pulses of MeV electrons with current densities as large as 10(12) A cm(-2). However, the divergence of these particle beams usually reduces the current density to a few times 10(6) A cm(-2) at distances of the order of centimetres from the source. The invention of devices that can direct such intense, pulsed energetic beams will revolutionize their applications. Here we report high-conductivity devices consisting of transient plasmas that increase the energy density of MeV electrons generated in laser-matter interactions by more than one order of magnitude. A plasma fibre created on a hollow-cone target guides and collimates electrons in a manner akin to the control of light by an optical fibre and collimator. Such plasma devices hold promise for applications using high energy-density particles and should trigger growth in charged particle optics.

Journal Article↗
PubMed2004

Ultralow emittance, multi-MeV proton beams from a laser virtual-cathode plasma accelerator.

The laminarity of high-current multi-MeV proton beams produced by irradiating thin metallic foils with ultraintense lasers has been measured. For proton energies >10 MeV, the transverse and longitudinal emittance are, respectively, <0.004 mm mrad and <10(-4) eV s, i.e., at least 100-fold and may be as much as 10(4)-fold better than conventional accelerator beams. The fast acceleration being electrostatic from an initially cold surface, only collisions with the accelerating fast electrons appear to limit the beam laminarity. The ion beam source size is measured to be <15 microm (FWHM) for proton energies >10 MeV.

Journal Article↗
PubMed2003

Spatial uniformity of laser-accelerated ultrahigh-current MeV electron propagation in metals and insulators.

The evolution of laser-generated MeV, MA electron beams propagating through conductors and insulators has been studied by comparing measurement and modeling of the distribution of MeV protons that are sheath accelerated by the propagated electrons. We find that electron flow through metals is uniform and can be laser imprinted, whereas propagation through insulators induces spatial disruption of the fast electrons. Agreement is found with material dependent modeling.

Journal Article↗
PubMed2003

Isochoric heating of solid-density matter with an ultrafast proton beam.

A new technique is described for the isochoric heating (i.e., heating at constant volume) of matter to high energy-density plasma states (>10(5) J/g) on a picosecond time scale (10(-12)sec). An intense, collimated, ultrashort-pulse beam of protons--generated by a high-intensity laser pulse--is used to isochorically heat a solid density material to a temperature of several eV. The duration of heating is shorter than the time scale for significant hydrodynamic expansion to occur; hence the material is heated to a solid density warm dense plasma state. Using spherically shaped laser targets, a focused proton beam is produced and used to heat a smaller volume to over 20 eV. The technique described of ultrafast proton heating provides a unique method for creating isochorically heated high-energy density plasma states.

Journal Article↗
PubMed2003

Evidence of ultrashort electron bunches in laser-plasma interactions at relativistic intensities.

The second harmonic of the laser light (2omega(0)) is observed on the rear side of thick solid targets irradiated by a laser beam at relativistic intensities. This emission is explained by the acceleration by the laser pulse in front of the target of short bunches of electrons separated by the period (or half the period) of the laser light. When reaching the rear side of the target, these electron bunches emit coherent transition radiation at 2omega(0). The observations indicate that, in our conditions, the minimum fraction of the laser energy transferred to these electron bunches is of the order of 1%.

Journal Article↗
PubMed2001

Effects of nonionizing prepulses in high-intensity laser-solid interactions.

We present theoretical and experimental evidence that nonionizing prepulses with intensities as low as 10(8)-10(9) W/cm(2) can substantially alter high intensity laser-solid interactions. We show that prepulse-heating and vaporization of the target can lead to a preformed plasma once the vapor is ionized by the rising edge of the high-intensity pulse. Our results indicate that peak prepulse intensity is not the only important parameter to consider in determining preformed plasma thresholds, and that a more comprehensive analysis of the prepulse duration and the target material is required.

Journal Article↗
PubMed2001

Doppler broadening of in-flight positron annihilation radiation due to electron momentum.

We report the first observation of electron momentum contributions to the Doppler broadening of radiation produced by in-flight two-photon annihilation in solids. In these experiments an approximately 2.5 MeV positron beam impinged on thin polyethylene, aluminum, and gold targets. Since energetic positrons easily penetrate the nuclear Coulomb potential and do not cause a strong charge polarization, the experimental annihilation line shapes agree well with calculations based on a simple independent-particle model. Moreover, annihilations with the deepest core electrons are greatly enhanced.

Journal Article↗
PubMed2001

Fast ignition by intense laser-accelerated proton beams.

The concept of fast ignition with inertial confinement fusion (ICF) is a way to reduce the energy required for ignition and burn and to maximize the gain produced by a single implosion. Based on recent experimental findings at the PETAWATT laser at Lawrence Livermore National Laboratory, an intense proton beam to achieve fast ignition is proposed. It is produced by direct laser acceleration and focused onto the pellet from the rear side of an irradiated target and can be integrated into a hohlraum for indirect drive ICF.

Journal Article↗
PubMed2000

Intense high-energy proton beams from Petawatt-laser irradiation of solids.

An intense collimated beam of high-energy protons is emitted normal to the rear surface of thin solid targets irradiated at 1 PW power and peak intensity 3x10(20) W cm(-2). Up to 48 J ( 12%) of the laser energy is transferred to 2x10(13) protons of energy >10 MeV. The energy spectrum exhibits a sharp high-energy cutoff as high as 58 MeV on the axis of the beam which decreases in energy with increasing off axis angle. Proton induced nuclear processes have been observed and used to characterize the beam.

Journal Article↗