Biomedical subjects

T Hankemeier

Publications and source records attributed to T Hankemeier.

4 recordsLinked to original sources

PubMed2006

Modelling of migration from multi-layers and functional barriers: estimation of parameters.

Functional barriers form parts of multi-layer packaging materials, which are deemed to protect the food from migration of a broad range of contaminants, e.g. those associated with reused packaging. Often, neither the presence nor the identity of the contaminants is known, so that safety assessment of the materials has to rely on predictive tools. Several complementary freeware described here allow one to model diffusion in multi-layer films. These tools require the input of parameters that are not easy to determine or predict. Previous work has focused on the prediction of diffusion coefficients at storage temperatures of packaging in contact with food. However, many other kinetic and thermodynamic parameters are needed to describe transport properties during the processing of a material at high temperature and during its shelf-life. All parameters needed for the calculations are discussed. In order to propose default values, the approach consists of (1) reviewing the available literature data, (2) running experiments on polypropylene, polyethylene and poly(ethylene vinyl alcohol) in typical conditions (separately diffusion during processing and migration) and (3) simulating numerical sets for typical situations. Several freeware are proposed to simulate migration from multi-layers and functional barriers using the default parameters.

Computer Simulation↗

PubMed2005

Functional barriers: properties and evaluation.

Functional barriers are multilayer structures deemed to prevent migration of some chemicals released by food-contact materials into food. In the area of plastics packaging, different migration behaviours of mono- and multilayer structures are assessed in terms of lag time and of their influence of the solubility of the migrants in food simulants. Whereas barriers to oxygen or to aromas must prevent the diffusion of these compounds under conditions of use, a functional barrier must also be efficient under processing conditions, to prevent diffusion of substances when the polymer layers are in contact at high (processing) temperatures. Diffusion in melted polymers at high temperatures is much slower for glassy polymers, than in polymers that are rubbery at ambient temperature. To evaluate the behaviour of functional barriers under conditions of use, a set of reference diffusion coefficients in the 40-60 degrees C range were determined for 14 polymers. Conditions for accelerated migration tests are proposed based on worst-case activation energy in the 40-60 degrees C range. For simulation of migration, numerical models are available. The rules derived from the models can be used both by industry (to optimize a material in terms of migration) or by risk assessors. Differences in migration behaviour between mono- and multilayer materials are discussed.

Alkanes↗

PubMed2002

Influence of solvent absorption on the migration of Irganox 1076 from LDPE.

The effect of solvent absorption on additive migration was studied by relating the diffusion coefficient (D) of Irganox 1076 to the maximum solvent absorption of different solvents in low-density polyethylene (LDPE) film. Solvents tested were ethanol, isopropanol, isooctane, ethylacetate, cyclohexane, tributyrin, tricaprylin and olive oil. Diffusion and partition coefficients were determined by fitting the migration curves, i.e. the concentration of Irganox 1076 in solvent as a function of time, with Fick 's diffusion equation. The results for the low molecular weight solvents show that with increasing maximum solvent absorption, D of Irganox 1076 is increasing as well. This trend is not observedfor the two triglycerides and olive oil. In spite of absorption, no increase in D was observed. The obtained result is the basis of an extended predictive migration model that, besides migrant and polymer properties, is also based on the maximum solvent absorption in the polymer.

Absorption↗

PubMed1999

On-line coupling of immunoaffinity-based solid-phase extraction and gas chromatography for the determination of s-triazines in aqueous samples.

The potential of immunoaffinity-based solid-phase extraction (IASPE) coupled on-line to gas chromatography (GC) for the determination of micropollutants was studied with emphasis on the interfacing of the immunoaffinity-based SPE and GC parts of the system. The cartridge containing the immobilized antibodies was coupled to the gas chromatograph via a reversed-phase cartridge (copolymer sorbent). After trace enrichment of the analytes on the immunoaffinity cartridge, they were desorbed and recollected on the reversed-phase cartridge by means of an acidic buffer. After clean-up and drying with nitrogen, desorption and transfer to the GC was done with ethyl acetate via an on-column interface in the partially concurrent solvent evaporation mode. The antibodies used in the immunoaffinity cartridge were raised against atrazine; several s-triazines were used as test compounds. Triazines that were structurally similar to atrazine, showed quantitative recovery. As an application, immunoaffinity SPE-GC was used for the analysis of river and waste water and orange juice. The selectivity of the system was such that non-selective flame ionization detection (FID) could be used to detect the analytes of interest in these complex matrices. The detection limits for 10-ml water samples were 15-25 ng/l for FID and about 1.5 ng/l for the nitrogen-phosphorus detection.

Atrazine↗