PubMed Health⌕ Search

Biomedical subjects

T Husain

Publications and source records attributed to T Husain.

At least 19 recordsLinked to original sources

Hydroview lens implant calcification: 186 exchanges at a district general hospital.

AIM: This paper describes the experience at a district general hospital of coping with an abrupt onset of calcification of Hydroview intraocular lens (IOL) implants requiring exchange surgery mostly for symptoms of glare, even though the visual acuities were relatively good. METHODS: In this retrospective study, the operative details of 174 consecutive lens exchanges by one surgeon were retrieved from the surgeon's notes. Of these, pre and post-operative details of 106 consecutive patients were obtained from the hospital notes. RESULTS: Of the 174 lens exchanges, all were sutureless except one and 31 eyes (18%) had had previous capsulotomies. Of 143 eyes with intact posterior capsules, eight (5.6%) needed anterior vitrectomy. Lens replacements were in the bag in 136 (95%), in the sulcus in five (3.5%), and in the anterior chamber in two (1.5%). Of the 31 eyes with previous capsulotomies, 10 (32%) needed anterior vitrectomy. Lens replacements were in the bag in 22 (71%) and in the sulcus in the remaining nine cases (29%). Postoperatively the best-corrected visual acuity was improved in 53%, remained the same in 35%, and deteriorated in 12%. CONCLUSION: The lens exchange procedure was mostly predictable with satisfactory visual results allowing preoperative counselling of risks to be similar to that for cataract surgery. The onset and resolution of the period of implantation of lenses requiring exchange has not been explained.

Aged↗

Long-term SO2 dispersion modeling over a coastal region.

Air dispersion modeling over coastal regions has proven to be a remarkable challenge in the field of air quality. Many conventional plume dispersion models, such as ISC2 and HYSPLIT, are unable to model such dispersion with the precision that is necessary to accurately predict ground-level concentrations in coastal areas. Considering this, the present work was carried out with two primary objectives: i) to evaluate the effectiveness of currently available mathematical models in predicting plume dispersion over a coastal region and ii) to study the impact of sulfur dioxide emissions from a petroleum refinery over a different community located in the adjacent area. This study demonstrates that CALPUFF predictions are more reliable compared to those of the other models studied, however the operation of CALPUFF is highly data intensive and in many instances, it is difficult to obtain all required input data. This is a particular problem for regions outside ofthe United States of America where sufficient data is difficult to obtain. In addition, the study concluded that the predicted annual average SO2 concentrations in the nearby communities are well within regulatory limits.

Air Movements↗

Risk-based monitored natural attenuation--a case study.

The term "monitored natural attenuation" (MNA) refers to a reliance on natural attenuation (NA) processes for remediation through the careful monitoring of the behavior of a contaminant source in time and space domains. In recent years, policymakers are shifting to a risk-based approach where site characteristics are measured against the potential risk to human health and the environment, and site management strategies are prioritized to be commensurate with that risk. Risk-based corrective action (RBCA), a concept developed by the American Society for Testing Materials (ASTM), was the first indication of how this approach could be used in the development of remediation strategies. This paper, which links ASTM's RBCA approach with MNA, develops a systematic working methodology for a risk-based site evaluation and remediation through NA. The methodology is comprised of seven steps, with the first five steps intended to evaluate site characteristics and the feasibility of NA. If NA is effective, then the last two steps will guide the development of a long-term monitoring plan and approval for a site closure. This methodology is used to evaluate a site contaminated with oil from a pipeline spill. The case study concluded that the site has the requisite characteristics for NA, but it would take more than 80 years for attenuation of xylene and ethylbenzene, as these chemicals appear in the pure phase. If fast remediation is sought, then efforts should be made to remove the contaminant from the soil. Initially, the site posed a serious risk to both on-site and off-site receptors, but it becomes acceptable after 20 years, as the plume is diluted and drifts from its source of origin.

Decision Making↗

Macrophage accumulation within the cap of carotid atherosclerotic plaques is associated with the onset of cerebral ischemic events.

PURPOSE: Macrophage accumulation is associated with aortic and coronary plaque instability. The macrophage content of carotid plaques removed at carotid endarterectomy (CE) was assessed, and the relevance to the onset of ipsilateral cerebral ischemic events (CIE) was examined. METHODS: Carotid plaques from patients undergoing CE were examined (group I, symptomatic stenoses, n = 28; group II, high-grade asymptomatic stenosis, n = 7). The plaques were stained with monoclonal antimacrophage antibody (HAM56), and the interval since the last CIE was recorded. The percentage area of the cap, shoulder, and entire sclerotic region was quantified by computerized planimetry. RESULTS: The macrophage content of the cap, shoulder, and sclerotic region in all 35 plaques was 1.14% (interquartile range, 0.56 to 3.86), 1.03% (0.51 to 2.15), and 0.49% (0.27 to 0.63), respectively (cap vs sclerotic, P <.01; shoulder vs sclerotic, P <. 01; cap vs shoulder, P =.23). In 18 plaques that were removed less than 180 days after the last CIE, the macrophage content of the cap, shoulder, and entire sclerotic region was 2.41% (0.95 to 4.81), 0. 83% (0.40 to 2.52), and 0.53% (0.38 to 0.71), respectively (cap vs sclerotic, P =.01; cap vs shoulder, P =.01). The content in the cap of these plaques was greater than in plaques removed more than 180 days after symptoms, or asymptomatic plaques (n = 17; 0.62% [0.44 to 1.25], P =.01). The cap macrophage content was inversely related to the time since the last CIE (r = -0.414, P =.029). CONCLUSION: In patients requiring CE, macrophage accumulation was maximal within the cap of carotid plaques and greatest in plaques removed less than 180 days after the last CIE. These findings and the inverse relationship between macrophage content and the interval since symptoms support the hypothesis that macrophage accumulation is associated with plaque instability.

Aged↗

Lung function norms in healthy working women.

Two hundred seventy four healthy working women subjects representing different states were subjected to pulmonary function testing to establish linear multiple regression model. Lung functions were considered as dependent variables while age, height and weight as independent variables. Highly significant negative correlation of all lung function parameters with age and positive correlations with height and weight were observed. Females showed a decline of 0.203, 0.199 and 0.210 litres per decade in FVC, FEV0.75 and FEV1.0 parameters respectively. An increase in FVC, FEV0.75 and FEV1.0 values was found to be 0.0217, 0.0132 and 0.0178 litres respectively per unit centimeter increase in height.

Adult↗

Role of an operative score in mitral reconstruction in dominantly stenotic lesions.

OBJECTIVE: The role of an operative score in selection and results of mitral valve reconstruction in dominantly stenotic mitral lesions was assessed. METHODS: A total of 136 patients consecutively underwent reconstruction for rheumatic mitral stenosis with or without regurgitation from December 1989 through December 1994. Mitral valve structure was scored for cuspal pliability and thickness, cuspal area loss, chordal length, papillary muscle length, annular dilatation and degree of associated regurgitation and calcification. A score of 0 indicated normal valve while a score of 24 indicated a grossly deformed valve. Age, sex, functional class, cardiac rhythm, mitral valve orifice area, left ventricular and left atrial dimensions, transmitral gradients, pulmonary artery pressures and thoroughness of repair were evaluated. RESULTS: Mitral valve architecture was disorganised moderately in 50 (37%) and severely in 69 (52%) patients. Extent of thoroughness in different operative techniques correlated with good (n = 30) or adequate (n = 60) outcome. Mean mitral valve orifice area increased from 0.77 +/- 0.2 to 2.56 +/- 0.6 cm2, peak gradient dropped from 20.3 +/- 6.2 to 8.6 +/- 3.5 torr, mean gradient from 13.5 +/- 4.9 to 4.76 +/- 2.2 torr and end-diastolic gradient from 10.1 +/- 5.0 to 3.2 +/- 1.9 torr. Lack of recognition of anatomical details and of all necessary componental measures constituted the learning curve of different operators. CONCLUSIONS: Recurrent disease, learning curve, inadequate repair and higher operative mitral valve score were the factors for poorer results in the intermediate term follow-up to 64 months. Thoroughness of repair was the most important correlate of outcome and indicative of expertise.

Adolescent↗

Spirometric changes after open mitral surgery.

New York Heart Association (NYHA) functional classification of cardiac patients is assessed by subjective impairment of respiratory reserve. We objectively studied pulmonary function by spirometry in 31 random patients (average age 27.2 years) with rheumatic mitral valve (MV) disease undergoing open surgery (7 reconstruction, 24 replacement) preoperatively, predischarge and at 3 month follow-up. Better preoperative spirometric parameters were observed in class II nonsmoker patients with smaller cardiothoracic ratio (CTR) and normal pulmonary artery pressure (PAP). After surgery mean PAP decreased to 19.0 +/- 6.7 mmHg, MV gradient dropped to 3.4 +/- 2.9 mmHg, average CTR decreased to 52.3 /- 5.5%. MV area increased significantly from 0.8 +/= 0.49 to 2.45 +/- 1.23 cm2. Forced vital capacity (FVC), forced expiratory volume in one second FEV1), flow rates at 25%-75% of expired vital capacity (FEF 25-75%) and maximum voluntary ventilation (MVV) decreased significantly in all patients at discharge. Prolonged postoperative ventilatory support over 10 hours led to markedly reduced predischarge FVC, FEV1, FEF50, MVV and maximum mid expiratory flow rate (MMEFR). Prolonged cardiopulmonary bypass over 80 minutes caused further decrease in FVC. After 3 months all these parameters improved in all above the preoperative level but remained below the predicted values. Despite improvement in NYHA class, impaired spirometry was observed in 11 patients. Functional or hemodynamic improvement did not correlate with spirometric changes.

Adult↗

Inhibition of proteolysis enhances aluminum-induced perikaryal neurofilament accumulation but does not enhance tau accumulation.

As observed for neurons in situ, phosphorylated neurofilament (NF) epitopes are normally segregated within the axonal cytoskeleton of NB2a/d1 cells. However, accumulations of phosphorylated NFs develop in NB2a/d1 perikarya following exposure to aluminum salts and following inhibition of proteolysis. In the present study, we observed that perikarya of cells exposed to both aluminum and the protease inhibitor C1 (also known as "AllNal") were more intensely labeled by monoclonal antibodies directed against both nonphosphorylated and phosphorylated epitopes than were cells treated with either aluminum or protease inhibitor alone. Since these monoclonal antibodies crossreact with tau, we also immunostained cells treated under these conditions with monoclonal antibodies directed against phosphate-insensitive (5E2) and phosphorylated (PHF-1) epitopes of tau. Aluminum treatment, but not C1 treatment, induced accumulation of total tau isoforms as judged by an increase in 5E2 immunoreactivity. Neither treatment, either separately or in combination, induced an increase in PHF-1 immunoreactivity. These findings suggest that alterations in immunoreactivity with SMI antibodies reflected increases in NF epitopes. This was confirmed by immunoblot analyses. Since proteolysis is apparently instrumental in maintaining the normal distribution patterns of phosphorylated NF epitopes, these findings implicate deficiencies in proteolytic mechanisms in the development of neurofibrillary pathology, and underscore the possibility of a multiple etiology in human neuropathological conditions.

Aluminum↗

Socioeconomic and health status of electronics workers employed in organized industry.

To study their socioeconomic and health status, 1,770 workers in the organized electronics industry in India were surveyed. Mean age of the workers employed in this industry was 32.5 +/- 6.01 years. The average per capita income/month was Rupees 333, indicating a higher socioeconomic status, compared with the status of the national population, as well as compared with their counterparts in the unorganized sectors. Respiratory symptoms and impairment rates were significantly higher in workers exposed to soldering fumes. The high prevalence of congested or inflamed throat was also related to chemical exposure specially among solderers and workers exposed to metal oxides. The ocular symptoms and signs were also related to chemical exposure. Musculoskeletal disorders were related to erratic ergonomic postures.

Adult↗

A survey of chronic bronchitis among brassware workers.

A stratified random sample of 580 workers aged between 18 and 50 years representing each sub-occupation in the brassware industry was studied for the prevalence of chronic bronchitis in relation to occupational and environmental factors. The findings were compared with those obtained in a reference group (N = 131) belonging to similar socio-economic status and unexposed to a dusty environment. Although the exposed group showed higher prevalence of chronic bronchitis in comparison to that observed in the controls (10.5 vs 5.3%), the difference was not significant at the 5% level. It was observed that the workers engaged in non-dusty occupations such as brass sheet cutting and engraving showed the lowest prevalence of the disease (5.0%) while those engaged in the dusty occupations viz., casting, soldering, electroplating and polishing showed the highest prevalence (12.0%). The smoking adjusted odds ratios calculated in various sub-occupations showed the highest risk of developing chronic bronchitis among the polishers (2.74). Though the risk in other occupational sub-groups was double, it did not attain a level of significance. The smoking adjusted odds ratios in relation to length of exposure showed that the risk was significantly higher among the workers exposed for over 10 years compared to those who worked for less than 10 years in the grinding, soldering and brass ingot making operations. The study thus showed a dose-response relationship between length of exposure and chronic bronchitis while effect of age on the disease was not discernible probably due to the small number of cases and the young age of the study group. The concentration of various metals in the air samples drawn from the work environment where main processes were in operation, was low compared to the prescribed level by ACGIH.

Adolescent↗

Wet-bulb globe temperature index: a predictor of physiological strain in hot environments.

The readings of the natural wet-bulb (tnwb) and globe thermometer for computing Twbg index (indoors) were taken between 08.00 to 17.00 h at two-hour intervals in different work locations in the glass bangle and brassware industries. For assessing the physiological reliability of the Twbg index for heat stress, the radial pulse rate was monitored at two-hour intervals in 60 brassware workers and 77 glass bangle workers (mean ages: 25.3 +/- 8.8 and 28.1 +/- 5.7 years) belonging to various occupations exposed to thermal radiation for 9.3 +/- 8.5 and 11.2 +/- 4.8 years respectively. The mean values of Twbg index observed in the brassware and glass bangle industries were found to be almost of the same order (34.4 +/- 3.0 degrees C and 35.2 +/- 1.1 degrees C). The radiant heat seemed to make the most significant contribution to the environmental heat stress in these industries. The globe temperature near the main melting furnace was as high as 53.8 +/- 3.0 degrees C and 59.2 +/- 4.02 0C in the glass bangle and brassware industries respectively. It was, therefore, expected that the exposed workers would show pronounced physiological strain. Surprisingly the pulse rates of these workers did not indicate any significant physiological strain since the maximal pulse rates recorded did not exceed the safe limits of circulatory strain recommended by the WHO.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗

Respiratory symptoms and ventilatory capacity in metal polishers.

To evaluate the long-term effects of metal dusts on the bronchopulmonary system and the synergistic effect of cigarette smoke, a comparative study of spirometric measurements in 104 polishers and 90 unexposed controls was carried out in 25 brass and steelware polishing industries at Moradabad in northern India. The two groups were comparable in terms of age, height, smoking habit and socio-economic status. A total of 58.6% of the polishers had one or more respiratory symptoms, compared to only 25.5% of the controls (P < 0.05). Chronic cough was present in 21 polishers (20.2%) as compared to 11.1% of the controls. However, this difference was insignificant. Chronic phlegm was nearly three times as frequent among the polishers as among the controls (17.5% vs 4.4%) (P < 0.005). The prevalence of dyspnoea of varying grades was also significantly higher (16.3% as opposed to 4.4%) among the exposed groups. Chronic bronchitis (6.7%) and occupational asthma (4.8%) were found to be confined to polishers. The polishers also experienced acute respiratory symptoms during the work shift. The prevalence of acute respiratory symptoms was recorded for cough in 19 workers (44.1%) followed by dyspnoea in 14 workers (32.5%) and throat irritation in 11 workers (25.5%). Comparison of the mean values of pulmonary function parameters in the polishers and the controls showed significant differences in the smoking and non-smoking groups (P < 0.001). The polishers exhibited significantly greater acute reductions in various lung functions over the work shift, particularly for forced expiratory flow over the 25-75% portion of the spirogram (FEF25-75%) FEF25% and FEF50%, than did the controls.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗

Occupational morbidity among children employed in brassware industry.

Fifty seven male children between ages of 10-16 years engaged in the brassware industry at Moradabad in Northern India were studied for occupational morbidity. The finding were compared with those obtained in the children (n = 29) engaged in other ancillary units which did not involve exposure to the metal fumes and dust in their work environment. The study showed a high prevalence of respiratory morbidity in the children engaged in the main units in comparison to those employed in the ancillary units (40.3 vs 27.6%; p less than 0.05). This was associated with significantly higher prevalence of pulmonary impairment in the former group (21.0%) particularly demonstrating restrictive ventilatory abnormality (10.5%) followed by bronchial obstruction (7.0%). The high respiratory morbidity may be attributed to chronic exposure to the fumes and dust of the metals such as nickel, chromium and cadmium. The children employed in the ancillary as well as in the main units showed high prevalences of musculo-skeletal disorders (27.6 and 22.8%) which may be caused by sustained faulty posture adopted during work and physical stress.

Adolescent↗

A cross-sectional study of pulmonary function among workers exposed to multimetals in the glass bangle industry.

Spirometric lung functions were evaluated in 220 asymptomatic glass bangle workers exposed to the salts of various heavy metals, such as arsenic, lead, zinc, copper, manganese, cobalt, cadmium, and selenium, which are used as coloring agents in the manufacture of glass bangles. The mean values of various spirometric variables (viz. FVC, FEV1, IMBC, and PEFR) were within normal range (more than 80% of the predicted values) in both smoking and nonsmoking glass bangle workers and did not reveal any significant differences in comparison with those observed in the unexposed controls. However, variables such as FEV1/FVC% ratio, FEF25-75 and FEF75-85 were reduced significantly (p less than 0.001) in the exposed group. The reduction was more marked in the smoking glass bangle workers indicating additive effect of cigarette smoking on the small airways. The exposed group showed a significantly higher prevalence (16.3%) of respiratory impairment in comparison to that observed in the controls (7.9%) as a result of exposure to various metals in the work environment (p less than 0.01). The respiratory impairment observed in the exposed group indicated primarily restrictive pattern of pulmonary abnormality (10.4%), while the controls revealed only 1.1% prevalence of this disease (p less than 0.001). The effect of the duration of exposure on the prevalence of respiratory impairment in the glass bangle industry revealed significantly higher prevalence (p less than 0.05) in those who worked for more than 10 years (23.0%) than in those who worked for less than 10 years (10.8%) thereby indicating that the duration of exposure is directly related to the prevalence of respiratory impairment.

Adult↗

A study of the prevalence of respiratory morbidity among agate workers.

A random sample of 342 workers engaged in chipping and grinding of agate stones were surveyed in a cross-sectional study to assess the prevalence of respiratory morbidity in the agate industry. The findings were compared with those obtained in controls. The study showed a significantly higher prevalence of lung diseases among agate workers than among controls (63.4% vs 35.5%, P less than 0.001). The respiratory morbidity in agate workers and controls was maximal in the group aged 31+ years (83.3% and 42.2%, respectively). The prevalence of pneumoconiosis in agate workers (18.4%) was highly significant as compared with controls, in whom not a single case was found (P less than 0.001). However, there was no significant difference between the prevalence of pneumoconiosis in men and women of the exposed group (17.9% vs 19.6%). Among the cases of pulmonary diseases in agate workers, pneumoconiosis formed the largest group (18.4%), whereas among controls it was tuberculosis (12.1%). The prevalence of pulmonary tuberculosis was very high in both agate workers and controls (15.5% and 12.1%, respectively), probably because of poor socio-economic and unhygienic living conditions. The prevalence of chronic bronchitis was found to be higher among the control population as compared with the exposed group (6.7% vs 2.6%). It therefore appeared that agate dust had no role in precipitating chronic bronchitis. However, bronchial asthma appeared to have been aggravated due to agate dust, as the risk among agate workers was 7-fold that found among the controls. The prevalence of pneumoconiosis showed a dose-response relationship in both male and female agate workers.(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗

Spirometric abnormalities among welders.

A group of manual welders (N = 57) engaged in gas welding joint faces of moulded brasswares, age group 13-60 years (mean: 29.2 +/- 1.37 years), having a mean exposure period of 12.4 +/- 1.12 years (range: 1-35 years) were subjected to spirometry to evaluate the prevalence of spirometric abnormalities. The findings were compared with those obtained from a reference group (N = 131) (mean age: 31.2 +/- 1.35 years) engaged in nonwelding jobs such as packing, labelling, and transportation of the finished brassware articles. The welders showed a significantly higher prevalence of respiratory impairment (28.0%) than that observed among the unexposed controls (6.1%) (P less than 0.001), as a result of exposure to welding gases which comprised fine particles of lead, zinc, chromium, and manganese. This occurred despite the lower concentration of the pollutants at the work place. In the exposed group, the smoking welders showed a prevalence of respiratory impairment significantly higher than that observed in the nonsmoking welders (40.0 vs 18.7%) (P less than 0.10). A similar trend was observed in the control group indicating that smoking had a deteriorating effect on spirometric tests. The results of the pulmonary function tests showed a predominantly restrictive type of pulmonary impairment (12.3%) followed by a mixed ventilatory defect (8.7%) among the welders. The effect of age on pulmonary impairment was not discernible either in the exposed or unexposed group. The analysis of data in relation to duration of exposure showed significant correlation between the prevalence of respiratory abnormalities and length of exposure. Welders exposed for over 10 years showed a prevalence of respiratory abnormalities significantly higher than those exposed for less than 10 years (44.4 vs 13.3%) (P less than 0.01) thereby showing that occupational exposure to welding fumes resulted in increased prevalence of pulmonary impairment in the welders. Smoking also had a contributory role thereby suggesting an interaction between smoking and welding exposure on the prevalence of pulmonary impairment in the welders engaged in brassware industries.

Adolescent↗

A study of respiratory morbidity and pulmonary function among solderers in the electronics industry.

Pulmonary function assessment of 197 solderers engaged in soldering printed circuit boards and other electronic components using lead-tin alloy impregnated solder in five major electronics workplaces in India was compared with the findings observed in 143 unexposed controls. Spirometry showed a significant impairment in the values of vital capacity (VC) and forced expiratory volume/forced vital capacity (FEV1/FVC) percent ratio in 47.2% of the solderers in comparison to 1.3% in the reference group (p less than 0.001). In the exposed group, female solderers particularly showed significantly higher (55.0%) prevalence of overall respiratory impairment in comparison to the 32.3% observed in their male counterparts (p less than 0.001). Bronchial obstruction was recorded in 7.6% of the solderers compared with 1.3% of the unexposed controls (p less than 0.01). The prevalence of restrictive and mixed ventilatory impairment was found to be 28.9 and 10.6%, respectively, among the exposed workers, while there was none among the control group. The solderers showed a predominantly restrictive pattern of pulmonary impairment that was mild in nature. Smoking caused no significant effect on the pulmonary impairment among the exposed workers. The study also did not show any significant differences in the prevalence of respiratory impairment between solderers exposed either less or more than 10 yr, thereby suggesting that there was no link between the respiratory impairment and duration of exposure. The industrial hygiene study conducted in the assembly section where soldering was done showed the mean concentration of lead to be 0.40 micrograms/m3 (range 0.12-0.43 micrograms/m3).(ABSTRACT TRUNCATED AT 250 WORDS)

Adult↗

Long-term effects of soldering fumes upon respiratory symptoms and pulmonary function.

To evaluate the long-term effect of soldering gases and fumes, and of cigarette smoke on lung function, and the prevalence of respiratory symptoms, a comparative study of spirometric measurements in 57 solderers engaged in acetylene gas soldering of brassware joints in the brass industry (mean exposure: 12.4 +/- 1.1 years) and in 131 controls was performed. The two groups were similar in age, height, smoking habits and social class. The prevalence of respiratory symptoms in the solderers did not differ significantly from that in the unexposed controls (59.6 vs 56.4%). However, solderers who smoked showed higher prevalence of respiratory symptoms than those who did not smoke; a similar trend was observed in the controls. The study failed to demonstrate any association between the respiratory symptoms and length of exposure. The respiratory status of the solderers was unaffected as the results of spirometric measurements of lung function did not show any significant differences between the exposed and the control groups, indicating the absence of an additive effect of cigarette smoking and exposure to soldering fumes.

Air Pollutants, Occupational↗