PubMed Health⌕ Search

Biomedical subjects

T J Beveridge

Publications and source records attributed to T J Beveridge.

At least 19 recordsLinked to original sources
PubMed1992

Influence of oxidation state on iron binding by Bacillus licheniformis capsule.

We examined ferric (Fe3+) and ferrous (Fe2+) iron binding by the anionic gamma-glutamyl capsule polymer of Bacillus licheniformis ATCC 9945. The addition of FeCl3 to B. licheniformis capsule under aerobic conditions resulted in flocculation due to the capsule-induced formation of amorphous, rust-colored ferrihydrite. Significant binding of iron, which could be attributed to binding by both the anionic capsule and the ferrihydrite precipitate, occurred. In contrast, the addition of FeCl2 to B. licheniformis capsule under anaerobic conditions resulted in significantly less iron being bound and no color change or flocculation occurring. Capsule-bound ferric iron could be partially released upon addition of several reducing agents. From these observations, it can be concluded that the oxidation state of iron significantly influences its tendency to be bound by anionic bacterial polymers such as capsules.

Bacillus↗
PubMed1992

The membrane-induced proton motive force influences the metal binding ability of Bacillus subtilis cell walls.

Bacillus subtilis 168 is a gram-positive bacterium whose cell wall contains the highly electronegative polymers peptidoglycan (chemotype A1 gamma) and glycerol-based teichoic acid to produce a surface with a net negative charge with high metal binding capacity. During metabolism, a membrane-induced proton motive force continuously pumps protons into the wall fabric. As a result, a competition between protons and metal ions for anionic wall sites occurs, and less metal is bound in living cells than in nonliving cells or those in which the plasma membrane has been uncoupled. This was shown by using two metallic ions, UO2(2+) and Sc3+, on control cells, cells uncoupled with either carbonyl cyanide m-chlorophenylhydrazone or NaN3, or cells killed by gamma radiation. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, and inductively coupled plasma atomic-emission spectroscopy showed that more metal was retained in the walls of nonliving cells and those with deenergized membranes than in their living counterparts.

Bacillus subtilis↗
PubMed1992

Formation of unilamellar liposomes from total polar lipid extracts of methanogens.

Unilamellar liposomes were formed by controlled detergent dialysis of mixed micelles consisting of acetone-insoluble total polar lipids extracted from various methanogens and the detergent n-octyl-beta-D-glucopyranoside. The final liposome populations were studied by dynamic light scattering and electron microscopy. Unilamellar liposomes with mean diameters smaller than 100 nm were obtained with lipid extracts of Methanococcus voltae, Methanosarcina mazei, Methanosaeta concilii, and Methanococcus jannaschii (grown at 50 degrees C), whereas larger (greater than 100-nm) unilamellar liposomes were obtained with lipid extracts of M. jannaschii grown at 65 degrees C. These liposomes were shown to be closed intact vesicles capable of retaining entrapped [14C]sucrose for extended periods of time. With the exception of Methanospirillum hungatei liposomes, all size distributions of the different liposome populations were fairly homogeneous.

Dialysis↗
PubMed1992

A new mercury-penicillin V derivative as a probe for ultrastructural localization of penicillin-binding proteins in Escherichia coli.

The precise ultrastructural localization of penicillin-binding protein (PBP)-antibiotic complexes in Escherichia coli JM101, JM101 (pBS96), and JM101(pPH116) was investigated by high-resolution electron microscopy. We used mercury-penicillin V (Hg-pen V) as a heavy-metal-labeled, electron-dense probe for accurately localizing PBPs in situ in single bacterial cells grown to exponential growth phase. Biochemical data derived from susceptibility tests and bacteriolysis experiments revealed no significant differences between Hg-pen V and the parent compound, penicillin V, or between strains. Both antibiotics revealed differences in the binding affinities for PBPs of all strains. Deacylation rates for PBPs were slow despite the relatively low binding affinities of antibiotics. Cells bound most of the Hg-pen V added to cultures, and the antibiotic-PBP complex could readily be seen by electron microscopy of unstained whole mounts as distinct, randomly situated electron-dense particles. Fifty to 60% of the antibiotic was retained by cells during processing for conventional embedding so that thin sections could also be examined. These revealed similar electron-dense particles located predominantly on the plasma membrane and less frequently in the cytoplasm. Particles positioned on the plasma membranes were occasionally shown to protrude into the periplasmic space, thereby reflecting the high resolution of the Hg-pen V probe. Moreover, some particles were observed free in the periplasm, suggesting, for the first time, that a proportion of PBPs may not be restricted to the plasma membrane but may be tightly associated with the peptidoglycan for higher efficiency of peptidoglycan assembly. All controls were devoid of the electron-dense particles. The presence of electron-dense particles in cells of the wild-type JM101, demonstrated that our probe could identify PBPs in naturally occurring strains without inducing PBP overproduction.

Anti-Bacterial Agents↗
PubMed1992

Detection of growth sites in and protomer pools for the sheath of Methanospirillum hungatei GP1 by use of constituent organosulfur and immunogold labeling.

Methanospirillum hungatei GP1 integrated approximately 9% of cellular [35S]cysteine into its sheath. Autoradiography of sodium dodecyl sulfate-polyacrylamide gels revealed that [35S]cysteine was confined to the proteins released by the sodium dodecyl sulfate-beta-mercaptoethanol-EDTA solubilization method (G. Southam and T. J. Beveridge, J. Bacteriol. 173:6213-6222, 1991) and was not present in the proteins released by treatment with phenol (G. Southam and T. J. Beveridge, J. Bacteriol. 174:935-946, 1992). Limited labeling of exposed sulfhydryl groups on hoops produced from sheath material suggested that most organosulfur groups occur within hoops and therefore help contribute to resilience. Electron microscopic autoradiography demonstrated that sheath growth, which is most active at the sites of cell division (spacer region), occurs through the de novo development of hoops. For growth to occur in the spacer region, sheath precursors must transverse several periodic envelope layers, including the cell wall (a single layer) and the various lamellae of the spacer plug (T. J. Beveridge, G. D. Sprott, and P. Whippey, J. Bacteriol. 173:130-140, 1991).

Bacterial Outer Membrane Proteins↗
PubMed1992

Reevaluation of envelope profiles and cytoplasmic ultrastructure of mycobacteria processed by conventional embedding and freeze-substitution protocols.

The cell envelope architectures and cytoplasmic structures of Mycobacterium aurum CIPT 1210005, M. fortuitum, M. phlei 425, and M. thermoresistible ATCC 19527 were compared by conventional embedding and freeze-substitution methods. To ascertain the integrity of cells during each stage of the processing regimens, [1-14C]acetate was incorporated into the mycolic acids of mycobacterial walls, and the extraction of labeled mycolic acids was monitored by liquid scintillation counting. Radiolabeled mycolic acids were extracted by both processing methods; however, freeze-substitution resulted in the extraction of markedly less radiolabel. During conventional processing of cells, most of the radiolabel was extracted during the dehydration stage, whereas postsubstitution washes in acetone yielded the greatest loss of radiolabel during freeze-substitution. Conventional embedding frequently produced cells with condensed fibrous nucleoids and occasional mesosomes. Their cell walls were relatively thick (approximately 25 nm) but lacked substance. Freeze-substituted cells appeared more robust, with well-dispersed nucleoids and ribosomes. The walls of all species were much thinner than those of their conventionally processed counterparts, but these stained well, which was an indication of more wall substance; the fabric of these walls, in particular the plasma membrane, appeared highly condensed and tightly apposed to the peptidoglycan. Some species possessed a thick, irregular outer layer that was readily visualized in the absence of exogenous stabilizing agents by freeze-substitution. Since freeze-substituted mycobacteria retained a greater percentage of mycolic acids in their walls, and probably other labile wall and cytoplasmic constituents, we believe that freeze-substitution provides a more accurate image of structural organization in mycobacteria than that achieved by conventional procedures.

Cell Membrane↗
PubMed1992

Ultrastructural examination of the lipopolysaccharides of Pseudomonas aeruginosa strains and their isogenic rough mutants by freeze-substitution.

The majority of Pseudomonas aeruginosa strains synthesize two antigenically distinct types of lipopolysaccharide (LPS), namely, a serotype-specific B-band LPS and a common antigen A-band LPS. A-band LPS consists of uncharged poly-D-rhamnan, which does not bind uranyl ions and is difficult to stain for electron microscopy; the highly charged B-band LPS is more easily visualized. We selected two wild-type strains, PAO1 (serotype O5) and IATS O6 (serotype O6), generated isogenic mutants from them, and examined the distribution of LPS on the surface of these organisms by freeze-substitution and electron microscopy. On PAO1 cells, which express both A-band and B-band LPSs, a 31- to 36-nm-wide fringe extending perpendicularly from the outer membrane was observed. A fine fibrous material was also observed on the surface of serotype O6 (A+ B+) cells, although this material did not form a uniform layer. When the LPS-deficient mutants, strains AK1401 (A+ B-), AK 1012 (A- B-), rd7513 (A- B-), and R5 (an IATS O6-derived rough mutant; A- B-), were examined, no extraneous material was apparent above the bilayer. However, an asymmetrical staining pattern was observed on the outer leaflet of the outer membrane of each of these mutants, presumably conforming to the anionic charge distribution of the core region of the rough LPS. In all cases, expression of the LPS types was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and silver staining. When optical densitometry on electron microscopy negatives was used to analyze the outer membrane staining profiles, subtle differences in the degrees of core deficiency among rough mutants were detectable. This is the first time an electron microscopy technique has preserved the infrastructure produced in the outer membrane by its constituent macromolecules. We conclude that freeze-substitution electron microscopy is effective in the visualization of LPS morphotypes.

Cell Membrane↗
PubMed1992

Participation of a cyanobacterial S layer in fine-grain mineral formation.

Cyanobacteria belonging to the Synechococcus group are ubiquitous inhabitants of diverse marine and freshwater environments. Through interactions with the soluble constituents of their aqueous habitats, they inevitably affect the chemistry of the waters they inhabit. Synechococcus strain GL24 was isolated from Fayetteville Green Lake, New York, where it has a demonstrated role in the formation of calcitic minerals. In order to understand the detailed interactions which lead to mineral formation by this organism, we have undertaken detailed ultrastructural studies of its cell surface and the initial events in mineral growth using a variety of electron microscopic and computer image enhancement techniques. Synechococcus strain GL24 has a hexagonally symmetrical S layer as its outermost cell surface component. The constituent protein(s) of this structure appears as a double band by sodium dodecyl sulfate-polyacrylamide gel electrophoresis with M(r)s of 104,000 and 109,000. We demonstrate that the S layer acts as a template for fine-grain gypsum and calcite formation by providing discrete, regularly arranged nucleation sites for the critical initial events in the mineralization process. To our knowledge, this is the first time that a bacterial S layer has been shown to have a role in mineral formation in a natural environment, and this report provides conclusive evidence for the specific involvement of bacterial surfaces in natural mineral formation processes.

Cyanobacteria↗
PubMed1992

Characterization of novel, phenol-soluble polypeptides which confer rigidity to the sheath of Methanospirillum hungatei GP1.

Treatment of the Methanospirillum hungatei GP1 sheath with 90% (wt/vol) phenol resulted in the solubilization of a novel phenol-soluble group of polypeptides. These polypeptides were purified by the removal of insoluble material by ultracentrifugation and represented approximately 19% of the mass of the sheath. The phenol-insoluble material resembled untreated sheath but had lost its rigidity and cylindrical form. Recombination of phenol-soluble and phenol-insoluble fractions by dialysis to remove phenol resulted in cylindrical reassembly products. Although bona fide sheath (complete with the 2.8-nm lattice) was not produced, a role for the phenol-soluble polypeptides in the maintenance of sheath rigidity is implied. The phenol-soluble polypeptides have limited surface exposure as detected by antibodies on intact sheath; therefore, they are not responsible for the 2.8-nm repeat occurring on the outer face of the sheath. However, longitudinal and transverse linear labeling by protein A-colloidal gold on the outer and inner faces, respectively, occurred with monoclonal antibodies specific to the phenol-soluble polypeptides. Restricted surface exposure of phenol-soluble polypeptides on the sheath highlighted molecular defects in sheath architecture. These lattice faults may indicate sites of sheath growth to accommodate cell growth or division (longitudinal immunogold label) and filament division (transverse immunogold label). The identification of a second group of polypeptides within the infrastructure of the sheath suggests that the sheath is a trilaminar structure in which phenol-soluble polypeptides are sandwiched between sodium dodecyl sulfate-beta-mercaptoethanol-EDTA-soluble polypeptides (G. Southam and T. J. Beveridge, J. Bacteriol. 173:6213-6222, 1991) (phenol-insoluble material).

Antibodies, Monoclonal↗
PubMed1991

Ultrastructure, inferred porosity, and gram-staining character of Methanospirillum hungatei filament termini describe a unique cell permeability for this archaeobacterium.

By light microscopy, Methanospirillum hungatei GP1 stains gram positive at the terminal ends of each multicellular filament and gram negative at all regions in between. This phenomenon was studied further by electron microscopy and energy-dispersive X-ray spectroscopy of Gram-stained cells, using a platinum compound to replace Gram's iodine (J. A. Davies, G. K. Anderson, T. J. Beveridge, and H. C. Clark, J. Bacteriol. 156:837-845, 1983). Crystal violet-platinum precipitates could be found only in the terminal cells of each filament, which suggested that the multilamellar plugs at the filament ends were involved with stain penetration. When sheaths were isolated by sodium dodecyl sulfate-dithiothreitol treatment, the end plugs could be ejected and their layers could be separated from one another by 0.1 M NaOH treatment. Each plug consisted of at least three individual layers; two were particulate and possessed 14.0-nm particles hexagonally arranged on their surfaces with a spacing of a = b = 18.0 nm, whereas the other was a netting of 12.5-nm holes with spacings and symmetry identical to those of the particulate layers. Optical diffraction and computer image reconstruction were used to clarify the structures of each layer in an intact plug and to provide a high-resolution image of their interdigitated structures. The holes through this composite were three to six times larger than those through the sheath. Accordingly, we propose that the terminal plugs of M. hungatei allow the access of larger solutes than does the sheath and that this is the reason why the end cells of each filament stain gram positive whereas more internal cells are gram negative. Intuitively, since the cell spacers which partition the cells from one another along the filament contain plugs identical in structure to terminal plugs, the diffusion of large solutes for these cells would be unidirectional along the filament-cell axis.

Actin Cytoskeleton↗
PubMed1991

Dissolution and immunochemical analysis of the sheath of the archaeobacterium Methanospirillum hungatei GP1.

The sheath of Methanospirillum hungatei GP1 was degraded by three dissolution techniques, which produced a range of soluble products. By using 0.05 M L-arginine buffer (pH 12.6) at 90 degrees C for 10 min, 74% (dry weight) of the sheath was dissolved; however, the solubilized polypeptides were extensively degraded. Treatment with 2% beta-mercaptoethanol and 2% sodium dodecyl sulfate at 90 degrees C in 0.05 M 2(N-cyclohexylamino)ethanesulfonic acid (CHES) buffer (pH 9.0) solubilized 42% (dry weight) of the sheath as a group of polypeptides of 30 to 40 kDa. At 100 degrees C for 2 h, 5% beta-mercaptoethanol, 2% sodium dodecyl sulfate (SDS), and 20 mM EDTA released 74% of the sheath's mass as a group of polypeptides of 10 to 40 kDa. All solubilized products were examined by SDS-polyacrylamide gel electrophoresis, and a range of high- and low-molecular-weight polypeptides was identified. None were glycoproteins. Hoops, which comprise the sheath's structure, were seen by electron microscopy after all of the attempted dissolutions. Monoclonal antibodies were produced against the 10- to 40-kDa range of solubilized products and against the approximately 40-kDa polypeptides, and polyclonal antiserum was produced against an 18-kDa polypeptide. These immunological markers were used in Western immunoblotting and protein A-colloidal gold-antibody probing by electron microscopy to identify the structural location of the various polypeptides. Native sheath, which possesses 2.8-nm particles on its outer surface (M. Stewart, T.J. Beveridge, and G.D. Sprott, J. Mol. Biol. 183:509-515, 1985; P.J. Shaw, G.J. Hills, J.A. Henwood, J.E. Harris, and D.B. Archer, J. Bacteriol. 161:750-757, 1985), presented a gentle wave-form surface in platinum-shadowed specimens. In contrast, the inner face of the sheath was highlighted by ridges lying perpendicular to the longitudinal axis of the sheath and likely corresponded to hoop boundaries. Both the polyclonal and monoclonal antibodies were specific for different faces; polyclonal antibodies labeled the inner face, whereas monoclonal antibodies labeled the outer face. Accordingly, the apparent asymmetry of structure between the two faces of the sheath can be correlated by our immunochemical probing with a distinct asymmetry in the distribution of exposed polypeptides between the faces. The possible implications of this asymmetry for growth and maturation of the sheath are explained.

Animals↗
PubMed1991

Freeze-substitution of gram-negative eubacteria: general cell morphology and envelope profiles.

Freeze-substitution was performed on strains of Escherichia coli, Pasteurella multocida, Campylobacter fetus, Vibrio cholerae, Pseudomonas aeruginosa, Pseudomonas putida, Aeromonas salmonicida, Proteus mirabilis, Haemophilus pleuropneumoniae, Caulobacter crescentus, and Leptothrix discophora with a substitution medium composed of 2% osmium tetroxide and 2% uranyl acetate in anhydrous acetone. A thick periplasmic gel ranging from 10.6 to 14.3 nm in width was displayed in E. coli K-12, K30, and His 1 (a K-12 derivative containing the K30 capsule genes), P. multocida, C. fetus, P. putida, A. salmonicida, H. pleuropneumoniae, and P. mirabilis. The other bacteria possessed translucent periplasms in which a thinner peptidoglycan layer was seen. Capsular polysaccharide, evident as electron-dense fibers radiating outward perpendicular to the cell surface, was observed on E. coli K30 and His 1 and P. mirabilis cells. A more random arrangement of fibers forming a netlike structure was apparent surrounding cells of H. pleuropneumoniae. For the first time a capsule, distinct from the sheath, was observed on L. discophora. In all instances, capsular polysaccharide was visualized in the absence of stabilizing agents such as homologous antisera or ruthenium red. Other distinct envelope structures were observed external to the outer membrane including the sheath of L. discophora and the S layers of A. salmonicida A450 and C. crescentus CB15A. We believe that the freeze-substitution technique presents a more accurate image of the structural organization of these cells and that it has revealed complex ultrastructural relationships between cell envelope constituents previously difficult to visualize by more conventional means of preparation.

Cell Membrane↗
PubMed1991

Surface layers of bacteria.

Since bacteria are so small, microscopy has traditionally been used to study them as individual cells. To this end, electron microscopy has been a most powerful tool for studying bacterial surfaces; the viewing of macromolecular arrangements of some surfaces is now possible. This review compares older conventional electron-microscopic methods with new cryotechniques currently available and the results each has produced. Emphasis is not placed on the methodology but, rather, on the importance of the results in terms of our perception of the makeup and function of bacterial surfaces and their interaction with the surrounding environment.

Bacteria↗
PubMed1990

Remobilization of toxic heavy metals adsorbed to bacterial wall-clay composites.

Significant quantities of Ag(I), Cu(II), and Cr(III) were bound to isolated Bacillus subtilis 168 walls, Escherichia coli K-12 envelopes, kaolinite and smectite clays, and the corresponding organic material-clay aggregates (1:1, wt/wt). These sorbed metals were leached with HNO3, Ca(NO3)2, EDTA, fulvic acid, and lysozyme at several concentrations over 48 h at room temperature. The remobilization of the sorbed metals depended on the physical properties of the organic and clay surfaces and on the character and concentration of the leaching agents. In general, the order of remobilization of metals was Cr much less than Ag less than Cu. Cr was very stable in the wall, clay, and composite systems; pH 3.0, 500 microM EDTA, 120-ppm [mg liter-1] fulvic acid, and 160-ppm Ca remobilized less than 32% (wt/wt) of sorbed Cr. Ag (45 to 87%) and Cu (up to 100%) were readily removed by these agents. Although each leaching agent was effective at mobilizing certain metals, elevated Ca or acidic pH produced the greatest overall mobility. The organic chelators were less effective. Lysozyme digestion of Bacillus walls remobilized Cu from walls and Cu-wall-kaolinite composites, but Ag, Cr, and smectite partially inhibited enzyme activity, and the metals remained insoluble. The extent of metal remobilization was not always dependent on increasing concentrations of leaching agents; for example, Ag mobility decreased with some clays and some composites treated with high fulvic acid, EDTA, and lysozyme concentrations. Sometimes the organic material-clay composites reacted in a manner distinctly different from that of their individual counterparts; e.g., 25% less Cu was remobilized from wall- and envelope-smectite composites than from walls, envelopes, or smectite individually in 500 microM EDTA. Alternatively, treatment with 160-ppm Ca removed 1.5 to 10 times more Ag from envelope-kaolinite composites than from the individual components. The particle size of the deposited metal may account for some of the stability changes; those metals that formed large, compact aggregates (Cr and Ag) as seen by transmission electron microscopy were less likely to be remobilized. In summary, it is apparent that remobilization of toxic heavy metals in sediments, soils, and the vadose zone is a complicated issue. Predictions based on single inorganic or organic component systems are too simplistic.

Adsorption↗
PubMed1990

High-resolution topography of the S-layer sheath of the archaebacterium Methanospirillum hungatei provided by scanning tunneling microscopy.

The inner and outer surfaces of the sheath of Methanospirillum hungatei GP1 have been imaged for the first time by using a bimorph scanning tunneling microscope (STM) on platinum-coated or uncoated specimens to a nominal resolution in height of ca. 0.4. nm. Unlike more usual types of microscopy (e.g., transmission electron microscopy), STM provided high-resolution topography of the surfaces, giving good depth detail which confirmed the sheath to be a paracrystalline structure possessing minute pores and therefore impervious to solutes possessing a hydrated radius of greater than 0.3 nm. STM also confirmed that the sheath consisted of a series of stacked hoops approximately 2.5 nm wide which were the remnants of the sheath after treatment with 2% (wt/vol) sodium dodecyl sulfate-2% (vol/vol) beta-mercaptoethanol (pH 9.0). No topographical infrastructure could be seen on the sides of the hoops. This research required the development of a new long-range STM capable of detecting small particles such as bacteria on graphite surfaces as well as a new "hopping" STM mode which did not deform the poorly conducting bacterial surface during high-resolution topographical analysis.

Archaea↗
PubMed1990

Mechanism of gram variability in select bacteria.

Gram stains were performed on strains of Actinomyces bovis, Actinomyces viscosus, Arthrobacter globiformis, Bacillus brevis, Butyrivibrio fibrisolvens, Clostridium tetani, Clostridium thermosaccharolyticum, Corynebacterium parvum, Mycobacterium phlei, and Propionibacterium acnes, using a modified Gram regimen that allowed the staining process to be observed by electron microscopy (J. A. Davies, G. K. Anderson, T. J. Beveridge, and H. C. Clark, J. Bacteriol. 156:837-845, 1983). Furthermore, since a platinum salt replaced the iodine mordant of the Gram stain, energy-dispersive X-ray spectroscopy could evaluate the stain intensity and location by monitoring the platinum signal. These gram-variable bacteria could be split into two groups on the basis of their staining responses. In the Actinomyces-Arthrobacter-Corynebacterium-Mycobacterium-Propionibacterium group, few cells became gram negative until the exponential growth phase; by mid-exponential phase, 10 to 30% of the cells were gram negative. The cells that became gram negative were a select population of the culture, had initiated septum formation, and were more fragile to the stress of the Gram stain at the division site. As cultures aged to stationary phase, there was a relatively slight increase toward gram negativity (now 15 to 40%) due to the increased lysis of nondividing cells by means of lesions in the side walls; these cells maintained their rod shape but stained gram negative. Those in the Bacillus-Butyrivibrio-Clostridium group also became gram negative as cultures aged but by a separate set of events. These bacteria possessed more complex walls, since they were covered by an S layer. They stained gram positive during lag and the initial exponential growth phases, but as doubling times increased, the wall fabric underlying the S layer became noticeably thinner and diffuse, and the cells became more fragile to the Gram stain. By stationary phase, these cultures were virtually gram negative.

Bacillus↗
PubMed1990

Evaluation of freeze-substitution and conventional embedding protocols for routine electron microscopic processing of eubacteria.

Freeze-substitution and more conventional embedding protocols were evaluated for their accurate preservation of eubacterial ultrastructure. Radioisotopes were specifically incorporated into the RNA, DNA, peptidoglycan, and lipopolysaccharide of two isogenic derivatives of Escherichia coli K-12 as representative gram-negative eubacteria and into the RNA and peptidoglycan of Bacillus subtilis strains 168 and W23 as representative gram-positive eubacteria. Radiolabeled bacteria were processed for electron microscopy by conventional methods with glutaraldehyde fixation, osmium tetroxide postfixation, dehydration in either a graded acetone or ethanol series, and infiltration in either Spurr or Epon 812 resin. A second set of cells were simultaneously freeze-substituted by plunge-freezing in liquid propane, substituting in anhydrous acetone containing 2% (wt/vol) osmium tetroxide, and 2% (wt/vol) uranyl acetate, and infiltrating in Epon 812. Extraction of radiolabeled cell components was monitored by liquid scintillation counting at all stages of processing to indicate retention of cell labels. Electron microscopy was also used to visually confirm ultrastructural integrity. Radiolabeled nucleic acid and wall components were extracted by both methods. In conventionally embedded specimens, dehydration was particularly damaging, with ethanol-dehydrated cells losing significantly more radiolabeled material during dehydration and subsequent infiltration than acetone-treated cells. For freeze-substituted specimens, postsubstitution washes in acetone were the most deleterious step for gram-negative cells, while infiltration was more damaging for gram-positive cells. Autoradiographs of specimens collected during freeze-substitution were scanned with an optical densitometer to provide an indication of freezing damage; the majority of label lost from freeze-substituted cells was a result of poor freezing to approximately one-half of the cell population, thus accounting for the relatively high levels of radiolabel detected in the processing fluids. These experiments revealed that gram-positive and gram-negative cells respond differently to freezing; these differences are discussed with reference to wall structure. It was apparent that the cells frozen first (ie., the first to contact the cryogen) retained the highest percentage of all radioisotopes, and the highest level of cellular infrastructure, indicative of better preservation. The preservation of these select cells was far superior to that obtained by more conventional techniques.

Bacillus subtilis↗