PubMed Health⌕ Search

Biomedical subjects

T J Emge

Publications and source records attributed to T J Emge.

10 recordsLinked to original sources
PubMed2004

1-D infinite array of metalloporphyrin cages.

The reaction of Co(II) with 5,15-dipyridyl-10,20-diphenylporphyrin (H(2)DPyP) produces the first metal-organic coordination polymer supported by a trans meso-bifunctional porphyrin ligand. Formulated empirically as [Co(3)(DPyP)(3)] x 4DMF, this compound exhibits a ribbonlike coordination network consisting of tetranuclear metalloporphyrin cages. The DMF guest molecules fill the intra-ribbon cages as well as the inter-ribbon space. Evacuation of [Co(3)(DPyP)(3)] x 4DMF at 130 degrees C generates [Co(3)(DPyP)(3)] that retains crystallinity, as shown by its powder X-ray diffraction pattern, which is consistent with that of [Co(3)(DPyP)(3)] x 4DMF.

Journal Article↗
PubMed2002

Chalcogen rich lanthanide clusters from halide starting materials (II): selenido compounds.

Lanthanides reduce mixtures of I(2) and PhSeSePh in THF, and the resultant heteroligand mixture reacts further with elemental Se in pyridine to give (THF)(6)Ln(4)I(2)(SeSe)(4)(mu(4)-Se).THF (Ln = Tm, Ho, Er, Yb). These selenium rich clusters contain a square array of Ln(III) ions connected through a single (mu(4)-Se) ligand. There are two I(-) ligands coordinating nonadjacent Ln(III) ions on the side of the cluster opposite the (mu(4)-Se), and the edges of the square are bridged by mu(2)-SeSe groups. The electronic spectrum of the Yb compound contains two absorption maxima that can tentatively be assigned as Se(2-) to Yb and SeSe to Yb charge-transfer absorptions, by comparison with the featureless absorption spectra of the Tm, Ho, and Er derivatives. With a 1/1/1/1 Yb/I/Ph(2)S(2)/Se stoichiometry, chalcogen rich compounds are not obtained, but instead, in Yb chemistry, the selenido cluster (THF)(10)Yb(6)Se(6)I(6) can be isolated in 51% yield. The molecular structure of this compound contains a Yb(4)Se(4) cubane fragment, with an additional Yb(2)Se(2) layer capping one face of the cube. Each Yb coordinates a terminal I(-). This intensely colored compound also has an absorption maximum in the visible spectrum. Upon thermolysis, the selenium rich compounds give Ln(2)Se(3) that is free of iodide contamination.

Journal Article↗
PubMed2001

Chalcogen-rich lanthanide clusters: cluster reactivity and the influence of ancillary ligands on structure.

Ytterbium metal reacts with PhEEPh (E = S, Se, Te) and elemental Se in pyridine to give (pyridine)(8)Yb(4)(SeSe)(2)(Se)(2)(mu(2)-SPh)(2)(SPh)(2), (py)(8)Yb(4)Se(SeSe)(3)(SeSeSePh)(Se(0.38)SePh), and (py)(8)Yb(4)Se(SeSe)(3)(SeSeTePh)(SeTePh), respectively. The SePh and TePh compounds contain a square array of Ln(III) ions all connected to a central Se(2)(-) ligand. Three edges of the square are bridged by diselenide ligands, with the fourth SeSe unit coordinating to an EPh ligand that has been displaced from an inner Yb coordination sphere. Differences in the two compounds have their origin in the relative strength of the Yb-E(Ph) bond. In the TePh compound, there is a complete insertion of Se into the remaining Yb-Te(Ph) bond to give a terminal SeTePh ligand, while in the SePh compound there is a compositional disorder in the structure comprised of a terminal SePh ligand and a minor component that has Se inserted into the Yb-Se(Ph) bond to give a terminal SeSePh ligand. The thiolate compound differs dramatically, crystallizing as a rhombohedral array of four Yb(III) ions connected by a pair of mu(3)-Se(2)(-) ligands, with the edges of the rhombus spanned by alternating diselenide and SPh. The SPh coordinate directly to Yb(III) ions in terminal or bridging modes. Cluster interconversion is facile: (py)(4)Yb(SePh)(2) reduces (py)(8)Yb(4)Se(SeSe)(3)(SeSeSePh)(Se(0.38)SePh) to give the cubane cluster [(py)(2)YbSe(SePh)](4), and the cubane reacts with elemental Se to give (py)(8)Yb(4)Se(SeSe)(3)(SeSeSePh)(Se(0.38)SePh). Upon thermolysis, these compounds give YbSe(x)().

Journal Article↗
PubMed2001

Assignment of the liposidomycin diazepanone stereochemistry.

The liposidomycins comprise a family of complex nucleoside antibiotics that inhibit bacterial peptidoglycan synthesis. Their structures (1, 2) feature nucleoside, ribofuranoside, diazepanone, and lipid regions. Several stereogenic centers remain unassigned, including three within the diazepanone region: C-6', C-2'", and C-3'". An intramolecular reductive amination reaction has been used to prepare model diazepanones. Analysis of 40 and two of its diastereomers by NMR spectroscopy, X-ray crystallography, and molecular modeling indicates a close relative configurational and conformational match between 40 and the liposidomycin diazepanone degradation product 43 and allows the assignment of stereochemistry of the natural products as either [C-6'(R), C-2'"(R), C-3'"(R)] or [C-6'(S), C-2'"(S), C-3'"(S)].

Amination↗
PubMed2001

Heteroleptic lanthanide compounds with chalcogenolate ligands: reduction of PhNNPh/PhEEPh (E = Se or Te) mixtures with Ln (Ln = Ho, Er, Tm, Yb). Thermolysis can give LnN or LnE.

Lanthanide metals reduce mixtures of azobenzene and PhEEPh (E = Se or Te) in pyridine to give the bimetallic compounds [(py)2Ln(EPh)(PhNNPh)]2 (E = Se, Ln = Ho (1), Er (2), Tm (3), Yb (4); E = Te, Ln = Ho (5), Er (6), Tm (7), Yb (8)). The structures of [(py)2Er(mu-eta 2-eta 2-PhNNPh)(SePh)](2).2py (2) and [(py)2Ho(mu-eta 2-eta 2-PhNNPh)(TePh)](2).2py (5) have been determined by low-temperature single-crystal X-ray diffraction, and the nearly identical unit cell volumes of the remaining compounds indicate they are most likely isomorphous to 2 or 5. In all compounds, the Ln(III) ions are bridged by a pair of mu-eta 2-eta 2-PhNNPh ligands that, from the N-N bond length, have clearly been reduced to dianions. Charge is balanced by the single terminal EPh ligand on each Ln, and the coordination sphere is saturated by two pyridine donors to give seven coordinate metal centers. Thermal decomposition of 5 gives HoTe, 8 gives a mixture of YbN and YbTe, and 1 does not give a crystalline solid-state product. Crystal data (Mo K alpha, 153(2) K) are as follows: 2, monoclinic group P2(1)/n, a = 11.864(3) A, b = 14.188(2) A, c = 17.624(2) A, beta = 91.62(2) degrees, V = 2965(1) A3, Z = 4; 5, triclinic space group P1, a = 10.349(2) A, b = 17.662(4) A, c = 17.730(8) A, alpha = 75.82(3) degrees, beta = 74.11(3) degrees, gamma = 89.45(2) degrees, V = 3016(2) A3, Z = 2.

Journal Article↗
PubMed2000

Divalent samarium compounds with heavier chalcogenolate (EPh; E = Se, Te) ligands.

Crystalline coordination complexes of Sm(EPh)2 (E = Se, Te) are described. The selenolate compound Sm(SePh)2 is unstable in solution, but a divalent selenolate can be prepared and isolated when precisely 1 equiv of Zn(SePh)2 is present to form heterometallic [(THF)3Sm(mu 2-SePh)3Zn(mu 2-SePh)]n (1). This compound is a 1D coordination polymer with alternating Sm(II) and Zn(II) ions connected by an alternating (1,3) number of bridging selenolate ligands and three THF ligands bound to each Sm(II) ion. The tellurolate Sm(TePh)2 forms a stable pyridine coordination compound (py)5Sm(TePh)2 (2) that is isostructural with known Eu and Yb benzenetellurolates. Both compounds were characterized by conventional spectroscopic methods. Polymer 1 was characterized by low-temperature single-crystal X-ray diffraction, and the unit cell of the tellurolate was determined. Crystal data (Mo K alpha, 153(5) (K) are as follows. 1: monoclinic space group P21, a = 10.666(2) A, b = 16.270(3) A, c = 12.002(3) A, beta = 114.81(2) degrees, Z = 2.2: orthorhombic space group Pbca, with a = 13.865(3) A, b = 16.453(5) A, c = 31.952(7) A, Z = 8.

Journal Article↗
PubMed2000

A spiro-linked pyrene-naphthoquinone.

The title molecule, 2'-pyrenylspiro[2, 3-dihydro-1H-cyclopenta[b]naphthalene-2,5'-1',3'-dioxane]-4,9-dione, C(32)H(22)O(4), contains an electron-donating pyrene group spiro-linked to an electron-accepting naphthoquinone. The molecules are V-shaped in profile and stack to form columns along b with alternating, approximately coplanar, pyrene and naphthoquinone fragments. Intermolecular contacts within a column are consistent with some degree of pi contact and possible long-range delocalization. Individual columns form a herringbone pattern when the crystal is viewed along b.

Crystallography, X-Ray↗
PubMed1994

Platinum(II) triamine complexes: cis-[PtCl(NH3)2(C10H13N5O5)]NO3.2H2O and [PtCl(C2H8N2)(C4H6N2)]NO3.

The structures of cis-diamminechloro(guanosine-N7)-platinum(II) nitrate dihydrate, cis-[PtCl(NH3)2-(C10H13N5O5)]NO3.2H2O, (I), and chloro(ethylenediamine)(1-methylimidazole-N3)platinum(II) nitrate, [PT-(C2H8N2)(C4H6N2)Cl]NO3, [PtCl(en)(1-MeIm)]NO3, (II), were determined by single-crystal X-ray diffraction. The former complex crystallized in the orthorhombic system and the latter in the monoclinic system. In compound (I), water molecules were found to connect the metal complex with the nitrate counter ions via hydrogen bonding.

Crystallography, X-Ray↗
PubMed1993

Structure-function analysis of antimicrotubule dinitroanilines against promastigotes of the parasitic protozoan Leishmania mexicana.

Although leishmaniasis is a major tropical disease, the currently available drugs are toxic and inadequate. We show that the antimicrotubule herbicide trifluralin has antileishmania activity. The present study aimed at deducing the relationship between the structure of the molecule and its antiprotozoan activity. Nine dinitroanilines, all of which were analogs of trifluralin, were compared. We found that pendimethalin was 2.5-fold more potent than trifluralin, and the higher efficacy may be correlated with molecular structural features that increase the accessibility to one nitro group. This association was further supported by molecular modeling. Moreover, trifluralin samples from two sources differed in their activities by more than threefold, and gas column chromatography showed that impurities were present in the more potent sample.

Aniline Compounds↗