Biomedical subjects

T L Kuhl

Publications and source records attributed to T L Kuhl.

13 recordsLinked to original sources

PubMed2006

Bilateral, difunctional nanosphere aggregates and their assembly mediated by polymer chains.

We have developed an efficient method for producing difunctional, bilateral nanospheres. A monolayer of nanoparticles was prepared followed by deposition of a thin layer of metal. By varying the base particle and metal deposited, bilateral nanoparticles were formed. The different regions of the nanoparticles were selectively functionalized with polymer linkers containing specific terminal groups, thereby creating bilateral, difunctional nanoparticles. Subsequent covalent cross-linking of different nanoparticles enabled the formation of stable architectures with programmed hierarchy and controlled chemical composition.

Microscopy, Electron, Scanning↗

PubMed2005

Characterization of biological thin films at the solid-liquid interface by x-ray reflectivity.

We demonstrate that 18 keV x-rays can be used to study organic thin films at the solid-liquid interface by x-ray reflectivity. We establish that this is a powerful technique for investigating biological systems in a previously inaccessible manner. Our measurements enabled the density distribution of single phospholipid bilayer membranes in bulk water to be measured with unprecedented precision. Previously, characterization of biomimetic structures normal to a "buried" interface was a domain of neutron reflectivity.

Lipid Bilayers↗

PubMed2005

Neutron and X-ray scattering studies of cholera toxin interactions with lipid monolayers at the air-liquid interface.

Using neutron/X-ray reflectivity and X-ray grazing incidence diffraction (GID), we have characterized the structure of mixed DPPE:GM(1) lipid monolayers before and during the binding of cholera toxin (CTAB(5)) or its B subunit (CTB(5)). Structural parameters such as the density and thickness of the lipid layer, extension of the GM(1) oligosaccharide headgroup, and orientation and position of the protein upon binding are reported. Both CTAB(5) and CTB(5) were measured to have approximately 50% coverage when bound to the lipid monolayer. X-ray GID experiments show that both the lipid monolayer and the cholera toxin layer are crystalline. The effects of X-ray beam damage have been assessed and the monolayer/toxin structure does not change with time after protein binding has saturated.

Cholera Toxin↗

PubMed2004

Cholera toxin assault on lipid monolayers containing ganglioside GM1.

Many bacterial toxins bind to and gain entrance to target cells through specific interactions with membrane components. Using neutron reflectivity, we have characterized the structure of mixed DPPE:GM(1) lipid monolayers before and during the binding of cholera toxin (CTAB(5)) or its B-subunit (CTB(5)). Structural parameters such as the density and thickness of the lipid layer, extension of the GM(1) oligosaccharide headgroup, and orientation and position of the protein upon binding are reported. The density of the lipid layer was found to decrease slightly upon protein binding. However, the A-subunit of the whole toxin is clearly located below the B-pentameric ring, away from the monolayer, and does not penetrate into the lipid layer before enzymatic cleavage. Using Monte Carlo simulations, the observed monolayer expansion was found to be consistent with geometrical constraints imposed on DPPE by multivalent binding of GM(1) by the toxin. Our findings suggest that the mechanism of membrane translocation by the protein may be aided by alterations in lipid packing.

Bacterial Toxins↗

PubMed2001

Impact of polymer tether length on multiple ligand-receptor bond formation.

The promoters of cell adhesion are ligands, which are often attached to flexible tethers that bind to surface receptors on adjacent cells. Using a combination of Monte Carlo simulations, diffusion reaction theory, and direct experiments (surface force measurements) of the biotin-streptavidin system, we have quantified polymer chain dynamics and the kinetics and spatial range of tethered ligand-receptor binding. The results show that the efficiency of strong binding does not depend solely on the molecular architecture or binding energy of the receptor-ligand pair, nor on the equilibrium configuration of the polymer tether, but rather on its "rare" extended conformations.

Biotin↗

PubMed2001

Synchrotron X-ray study of lung surfactant-specific protein SP-B in lipid monolayers.

This work reports the first x-ray scattering measurements to determine the effects of SP-B(1-25), the N-terminus peptide of lung surfactant-specific protein SP-B, on the structure of palmitic acid (PA) monolayers. In-plane diffraction shows that the peptide fluidizes a portion of the monolayer but does not affect the packing of the residual ordered phase. This implies that the peptide resides in the disordered phase, and that the ordered phase is essentially pure lipid, in agreement with fluorescence microscopy studies. X-ray reflectivity shows that the peptide is oriented in the lipid monolayer at an angle of approximately 56 degrees relative to the interface normal, with one end protruding past the hydrophilic region into the fluid subphase and the other end embedded in the hydrophobic region of the monolayer. The quantitative insights afforded by this study lead to a better understanding of the lipid/protein interactions found in lung surfactant systems.

Amino Acid Sequence↗

PubMed2001

Polymer-induced membrane contraction, phase separation, and fusion via Marangoni flow.

Experiments have shown that the depletion of polymer in the region between two apposed (contacting or nearly contacting) bilayer membranes leads to fusion. In this paper we show theoretically that the addition of nonadsorbing polymer in solution can promote lateral contraction and phase separation of the lipids in the outer monolayers of the membranes exposed to the polymer solution, i.e., outside the contact zone. This initial phase coexistence of higher- and lower-density lipid domains in the outer monolayer results in surface tension gradients in the outer monolayer. Initially, the inner layer lipids are not exposed to the polymer solution and remain in their original "unstressed" state. The differential stresses on the bilayers give rise to a Marangoni flow of lipid from the outer monolayers in the "contact zone" (where there is little polymer and hence a uniform phase) to the outer monolayers in the "reservoir" (where initially the surface tension gradients are large due to the polymer-induced phase separation). As a result, the low-density domains of the outer monolayers in the contact zone expose their hydrophobic chains, and those of the inner monolayers, to the solvent and to each other across the narrow water gap, allowing fusion to occur via a hydrophobic interaction. More generally, this type of mechanism suggests that fusion and other intermembrane interactions may be triggered by Marangoni flows induced by surface tension gradients that provide "action at a distance" far from the fusion or interaction zone.

Cell Membrane↗

PubMed2001

Packing of ganglioside-phospholipid monolayers: an x-ray diffraction and reflectivity study.

Using synchrotron grazing-incidence x-ray diffraction (GIXD) and reflectivity, the in-plane and out-of-plane structure of mixed ganglioside-phospholipid monolayers was investigated at the air-water interface. Mixed monolayers of 0, 5, 10, 20, and 100 mol% ganglioside GM(1) and the phospholipid dipalmitoylphosphatidylethanolamine (DPPE) were studied in the solid phase at 23 degrees C and a surface pressure of 45 mN/m. At these concentrations and conditions the two components do not phase-separate and no evidence for domain formation was observed. X-ray scattering measurements reveal that GM(1) is accommodated within the host DPPE monolayer and does not distort the hexagonal in-plane unit cell or out-of-plane two-dimensional (2-D) packing compared with a pure DPPE monolayer. The oligosaccharide headgroups were found to extend normally from the monolayer surface, and the incorporation of these glycolipids into DPPE monolayers did not affect hydrocarbon tail packing (fluidization or condensation of the hydrocarbon region). This is in contrast to previous investigations of lipopolymer-lipid mixtures, where the packing structure of phospholipid monolayers was greatly altered by the inclusion of lipids bearing hydrophilic polymer groups. Indeed, the lack of packing disruptions by the oligosaccharide groups indicates that protein-GM(1) interactions, including binding, insertion, chain fluidization, and domain formation (lipid rafts), can be studied in 2-D monolayers using scattering techniques.

Air↗

PubMed2000

Force probe measurements of antibody-antigen interactions.

The surface force apparatus has been used to quantify directly the forces that govern the interactions between proteins and ligands. In this work, we describe the measured interactions between the antigen fluorescein and the Fab' fragment of the monoclonal 4-4-20 anti-fluorescyl IgG antibody. Here we first describe the use of the surface force apparatus to demonstrate directly the impact of the charge composition in the region of the antibody binding site on the antibody interactions. Several approaches are described for immobilizing antigens, antibodies, and proteins in general for direct force measurements. The measured force profiles presented are accompanied by an extensive discussion of protocols used to analyze the force-distance curves and to interpret them in terms of the antibody structure. In addition to long-range electrostatic forces, we also consider short-range forces that can affect the strength of adhesion between the Fab' and immobilized fluorescein. The latter investigations demonstrate the influence of interfacial properties on the recognition of surface-bound antigens.

Antibodies, Monoclonal↗

PubMed2000

X-ray and neutron surface scattering for studying lipid/polymer assemblies at the air-liquid and solid-liquid interfaces.

Simple mono- and bilayers, built of amphiphilic molecules and prepared at air-liquid or solid-liquid interfaces, can be used as models to study such effects as water penetration, hydrocarbon chain packing, and structural changes due to head group modification. In the paper, we will discuss neutron and X-ray reflectometry and grazing incidence X-ray diffraction techniques used to explore structures of such ultra-thin organic films in different environments. We will illustrate the use of these methods to characterize the morphologies of the following systems: (i) polyethylene glycol-modified distearoylphosphatidylethanolamine monolayers at air-liquid and solid-liquid interfaces; and (ii) assemblies of branched polyethyleneimine polymer and dimyristoylphophatidylcholine lipid at solid-liquid interfaces.

Adsorption↗

PubMed1998

A neutron reflectivity study of polymer-modified phospholipid monolayers at the solid-solution interface: polyethylene glycol-lipids on silane-modified substrates.

The structure of polymer-decorated phospholipid monolayers at the solid-solution interface was investigated using neutron reflectometry. The monolayers were composed of distearoylphosphatidylethanolamine (DSPE) matrixed with varying amounts of DSPE-PEG (DSPE with polyethylene glycol covalently grafted to its headgroup). Mixed lipid monolayers were Langmuir-Blodgett deposited onto hydrophobic quartz or silicon substrates, previously hydrophobized by chemically grafting a robust monolayer of octadecyltrichlorosilane (OTS). We show that this method results in homogeneous and continuous phospholipid monolayers on the silanated substrates and determine that the grafted PEG chains extend away from the monolayers into the solvent phase as a function of their density, as expected from scaling theories. In addition, ligands were coupled to the end of the PEG chains and selective binding was demonstrated using fluorescence microscopy. Our results demonstrate that these constructs are ideal for further characterization and studies with well-defined monomolecular films.

Adsorption↗

PubMed1997

Direct measurement of a tethered ligand-receptor interaction potential.

Many biological recognition interactions involve ligands and receptors that are tethered rather than rigidly bound on a cell surface. A surface forces apparatus was used to directly measure the force-distance interaction between a polymer-tethered ligand and its receptor. At separations near the fully extended tether length, the ligands rapidly lock onto their binding sites, pulling the ligand and receptor together. The measured interaction potential and its dynamics can be modeled with standard theories of polymer and colloidal interactions.

Bacterial Proteins↗

PubMed1994

Modulation of interaction forces between bilayers exposing short-chained ethylene oxide headgroups.

The use of liposomes as drug delivery systems has been limited by their rapid clearance from circulation by the mononuclear phagocyte system. Recent studies have found that circulation times can be greatly enhanced by incorporating a small amount of modified lipids whose headgroups are derivatized with a bulky water soluble polymeric chain of poly ethylene oxide. We report here a systematic study using the Surface Forces Apparatus to measure directly the interactions between two phosphatidyl ethanolamine lipid bilayers, exposing this polymeric headgroup at different concentrations in the bilayer. We found that the force becomes repulsive at all separations and that the thickness of the steric barrier could be controlled easily by adjusting the concentration of the modified lipids. Equilibrium force profiles were measured that were reversible and largely insensitive to changes in electrolyte concentration and temperature. The results have enabled the Dolan and Edwards theory for the steric forces of low coverage polymer surfaces and the Alexander de Gennes theory for high coverage surfaces to be tested, and both were found to apply. We conclude that these simple theories can be used to model the interactions of surprisingly short segments and, hence, apply to such systems as lipids with bulky headgroups and liposomes containing a sterically stabilizing polymer.

Biophysical Phenomena↗