PubMed Health⌕ Search

Biomedical subjects

T Tosa

Publications and source records attributed to T Tosa.

At least 19 recordsLinked to original sources

Improvement of a d-biotin-hyperproducing recombinant strain of Serratia marcescens.

We previously reported that a recombinant strain, SB412(pLGM304), was constructed from acidomycin-resistant mutants of Serratia marcescens and produced 200 mg of d-biotin per liter of a medium containing sucrose and urea (Sakurai et al., 1993a, b). In the present work, we intended to improve the d-biotin production. Both ethionine and S-2-aminoethylcysteine resistances were added to the host strain SB412, producing d-biotin at 20 mg l-1, and a resultant strain, ETA23, producing it at 33 mg l-1, was obtained. Cells of ETA23 did not maintain pLGM304 stably after greater than 30 generations under non-selective culture conditions. A new recombinant plasmid, pLGM304P, was constructed so as to be composed of pLGM304 and the parB locus, a plasmid-stabilizing element. ETA23 stably maintained pLGM304P after 50 generations under non-selective culture conditions. ETA23(pLGM304) produced 250 mg l-1 of d-biotin in a shaking flask under batch culture conditions and 500 mg l-1 in a jar fermentor under fed-batch culture conditions.

Biotin↗

The lipA gene of Serratia marcescens which encodes an extracellular lipase having no N-terminal signal peptide.

The lipA gene encoding an extracellular lipase was cloned from the wild-type strain of Serratia marcescens Sr41. Nucleotide sequencing showed a major open reading frame encoding a 64.9-kDa protein of 613 amino acid residues; the deduced amino acid sequence contains a lipase consensus sequence, GXSXG. The lipase had 66 and 56% homologies with the lipases of Pseudomonas fluorescens B52 and P. fluorescens SIK W1, respectively, but did not show any overall homology with lipases from other origins. The Escherichia coli cells carrying the S. marcescens lipA gene did not secrete the lipase into the medium. The S. marcescens lipase had no conventional N-terminal signal sequence but was also not subjected to any processing at both the N-terminal and C-terminal regions. A specific short region similar to the regions of secretory proteins having no N-terminal signal peptide was observed in the amino acid sequence. Expression of the lipA gene in S. marcescens was affected by the carbon source and the addition of Tween 80.

Amino Acid Sequence↗

Purification and some properties of alanine aminotransferase from Candida maltosa.

Alanine aminotransferase (AlaAT; EC 2.6.1.2) was purified to homogeneity from Candida maltosa that was grown on L-alanine as the sole source of carbon and nitrogen. The enzyme has a molecular mass of 99kDa and consists of two subunits of equal molecular mass (52 kDa). Each subunit binds one mole of PLP. The enzyme has an isoelectric point of 5.3 and an optimum pH of 6.0-7.5. The spectroscopic profile and an inhibition experiment showed that both PLP and free-SH groups are directly involved in the enzymatic catalysis. In the N-terminal region of the enzyme, the consensus sequence (five amino acids) that commonly appears in mammalian and higher plant enzymes is present. Compared with mammalian enzyme, the Candida AlaAT is heat-sensitive and a little looser in substrate specificity, and its affinity towards L-alanine is high.

Alanine Transaminase↗

Improvement of culture conditions for L-proline production by a recombinant strain of Serratia marcescens.

Serratia marcescens SP511 was previously reported to be an L-proline-producing strain that harbors a recombinant plasmid carrying the mutant type of the proline operon. This strain produced 65 g/L of L-proline in a medium containing 22% sucrose and urea after 5 d of incubation under the conventional culture conditions. We searched for more suitable culture conditions for more abundant L-proline production by SP511. To improve the supply of a nitrogen source to cells, ammonium was used instead of urea and fed to a culture under control of the pH of the medium. The concentrations of MgSO4 and K2HPO4 were increased, and in addition, sucrose was continuously added to the culture at a final concentration of 32%. Under these conditions, the cell amount was increased twofold over that under the previous conditions and L-proline production reached a maximum of more than 100 g/L after 4 d of incubation.

Ammonia↗

Effect of a novel anti-rheumatic drug, TA-383, on type II collagen-induced arthritis--suppressive effect of TA-383 on interleukin 6 production.

We have evaluated the effect of a novel anti-rheumatic drug, cis-2-(4-chlorophenyl)-4,5-diphenyl-2-imidazoline hydrochloride (TA-383), on type II collagen (CII)-induced arthritis in DBA/1J mice. Treatment with TA-383 (0.4 mg/kg/day) from the day of immunization with CII strongly suppressed the arthritic responses. Increased serum interleukin 6 (IL-6) level was lowered in parallel with the effect. Effect of TA-383 on IL-6 production was examined in vitro. TA-383 inhibited the production of IL-6 by murine synovial fibroblasts stimulated with recombinant interleukin 1 (IL-1) beta in a dose-dependent manner (0.1-10 microM). Neither the general protein synthesis nor the expression of type I IL-1 receptor was affected by TA-383. The results show that TA-383 possesses an inhibitory activity on IL-6 generation and suggest that the effect may partly contribute to the anti-arthritic effect of TA-383.

Animals↗

Molecular breeding of a biotin-hyperproducing Serratia marcescens strain.

We previously reported that an acidomycin-resistant mutant of Serratia marcescens Sr41, SB304, and a mutant that was derived from SB304 and was resistant to a higher concentration of acidomycin, SB412, produced 5 and 20 mg of D-biotin, respectively, per liter of a medium containing sucrose and urea (N. Sakurai, Y. Imai, M. Masuda, S. Komatsubara, and T. Tosa, Appl. Environ. Microbiol. 59:2857-2863, 1993). In order to increase the productivity of D-biotin, the biotin (bio) operons were cloned from strains SB412, SB304, and 8000 (wild-type strain), and pLGM412, pLGM304, and pLGW101, respectively, were obtained through subcloning. These plasmids harbored 7.2-kb DNA fragments coding for the bioABFCD genes on a low-copy-number vector and were introduced into SB304, SB412, and 8000. Among the resulting recombinant strains, SB412(pLGM304) exhibited the highest D-biotin production (200 mg/liter) in the production medium. The plasmid was stably maintained in cells. Unexpectedly, SB412(pLGM412) grew very slowly, and the D-biotin productivity of this recombinant strain was not evaluated because pLGM412 was unstable.

Biotin↗

Construction of a Biotin-Overproducing Strain of Serratia marcescens.

We have isolated mutants resistant to acidomycin, a biotin analog, from Serratia marcescens Sr41. Strain SB304, resistant to 0.5 mg of acidomycin (frequently called actithiazic acid) per ml, produced 5 mg of d-biotin per liter of a medium containing sucrose and urea. Strain SB412, which was isolated from SB304 on a minimal agar plate containing 2 mg of acidomycin per ml and 0.1 mg of 5-(2-thienyl)-valeric acid per ml, produced 20 mg of d-biotin per ml. The two enzymes related to biotin synthesis were found to be released from biotin-mediated feedback repression in these mutants. Transductional analysis revealed that SB412 had acquired at least two mutations, one in the biotin operon locus and the other in an unknown locus distant from the biotin operon locus.

Journal Article↗

Enhanced expression of interleukin 6 in rat and murine arthritis models.

Interleukin 6 (IL-6) is a multifunctional cytokine and plays an important role in host defense mechanisms. Enhanced production of IL-6 has been reported in polyclonal B-cell abnormalities and autoimmune diseases such as rheumatoid arthritis (RA). To investigate the role of IL-6 inflammatory joint diseases, serum IL-6 levels of three animal models of RA, namely type II collagen (CII)-induced murine, rat arthritis and adjuvant-induced rat arthritis, were monitored. In these models, serum IL-6 increased with the development of arthritis. Serum IL-6 was not elevated by immunization with a non-arthritogenic immunogen such as bovine type I collagen (CI) and bovine serum albumin (BSA) to DBA/1J mice. The serum IL-6 level was correlated well with the severity of adjuvant-induced arthritis. The elevated IL-6 in sera may be associated with the overproduction of IL-6 at the arthritis paws, because higher IL-6 activity was detected in the homogenates of arthritic paws as compared with the control paws. Synovial fibroblasts were isolated from the arthritis knee joints of DBA/1J mice. These cells expressed type I interleukin 1 (IL-1) receptor constitutively and produced large amounts of IL-6 in response to IL-1 in vitro. Enhanced production of IL-1 was also detected at the arthritis paws. These results suggest that the elevated IL-6 in sera may be associated with the overproduced IL-6 in response to the increased IL-1 at the arthritic joints. Serum IL-6 may be a useful parameter for monitoring disease activity.

Animals↗

Specific assay for endotoxin using immobilized histidine, Limulus amoebocyte lysate and a chromogenic substrate.

The Limulus amoebocyte lysate (LAL) test is inhibited or enhanced by many substances. In order to overcome this problem, a specific endotoxin assay method using a membrane filter unit, a chromogenic LAL reagent, and immobilized histidine (which is a specific adsorbent for endotoxins) was developed. Endotoxins are quantitatively adsorbed on immobilized histidine. The adsorbed endotoxins are separated from LAL-inhibiting or -enhancing substances by the membrane filter unit, and their activities are directly assayed with the LAL reagent in a filter cup without any inhibition or enhancement. The reproducibility and the accuracy of this method are high. This new endotoxin assay method using immobilized histidine can be used for the determination of endotoxins in a solution containing LAL-inhibiting or -enhancing substances such as amino acids and antibiotics, as an alternative to the more common gel-clot technique.

Adsorption↗

Improvement of nitrogen supply for L-threonine production by a recombinant strain of Serratia marcescens.

Serratia marcescens T-2000 was previously reported to be an L-threonine-producing strain that harbors the recombinant plasmid carrying the mutant-type threonine operon. This strain produced 55 g of L-threonine/L of the medium containing urea as a nitrogen source after 72 h of cultivation. In the urea-containing medium, transitory stop of the growth was observed during the early period of cultivation when the entire amount of ammonium ion formed from urea via heat decomposition disappeared in the medium. This indicated that the shortage of ammonium supply in cells might delay both the cell growth and the L-threonine production. The use of ammonia water as a nitrogen source for L-threonine production was therefore studied, because microbial cells generally assimilate this source more readily than urea. When ammonia water was automatically fed to the medium so as to maintain the pH of the medium at around 7, the growth was accelerated, and the L-threonine production reached a maximum of 65 g/L at 48 h. Under these conditions, sucrose, a carbon source, was continuously fed to the medium, resulting in the production of 100 g of L-threonine/L at 96 h. Thus, the L-threonine production of the recombinant L-threonine-producing strain could be increased by devising the method for supply of a nitrogen source.

Ammonia↗

Specific assay for endotoxin using immobilized histidine and Limulus amebocyte lysate.

The LAL test is inhibited or enhanced by many substances. To overcome these problems, we have developed a specific endotoxin assay method using an ultrafiltration unit, a fluorometric LAL reagent, and immobilized histidine (which is a specific adsorbent for endotoxins). This method is composed of two steps. The first step is the adsorption of endotoxins. Using immobilized histidine, endotoxins are quantitatively adsorbed on the adsorbent, and the adsorbed endotoxins are separated from LAL-inhibiting or -enhancing substances by the ultrafiltration unit. The second step is the reaction of adsorbed endotoxins with the LAL reagent. The endotoxins adsorbed on immobilized histidine are directly reacted with the LAL reagent in a filter cup and show enough activity for assay. The reproducibility and the accuracy of this method are high, and the recovery of endotoxins from a sample solution is more than 95%. The new endotoxin assay method using immobilized histidine can be utilized for the determination of endotoxins in a solution containing LAL-inhibiting or -enhancing substances such as amino acids and antibiotics instead of requiring employment of the more common gel-clot technique.

Adsorption↗