PubMed Health⌕ Search

Biomedical subjects

T W Chow

Publications and source records attributed to T W Chow.

At least 55 records · Page 3Linked to original sources

Thrombotic thrombocytopenic purpura: understanding a disease no longer rare.

Serial studies of plasma samples from patients during episodes of thrombotic thrombocytopenic purpura (TTP) have often shown either the presence of unusually large (UL) von Willebrand factor (vWf) multimers or, alternatively, absence of the largest plasma vWf forms. The presence of ULvWf multimers in TTP patient plasma may reflect impaired processing of the ULvWf forms released from endothelial cells. The disappearance of ULvWf and large vWf multimers in some TTP patient plasma samples during acute TTP episodes may be predominantly because these ULvWf forms, along with the largest vWf multimers, bind to platelets and cause aggregation. Serial flow cytometry studies of EDTA-whole blood samples from patients with initial episode, intermittent, and chronic relapsing types of TTP confirm that vWf is the likely aggregating agent, perhaps in association with fluid shear stress. The amount of vWf bound to single platelets has been found to be significantly increased during TTP relapses relative to remission periods in patients with all types of TTP. A substance in normal platelet-poor plasma and the cryoprecipitate-depleted fraction of normal plasma (cryosupernatant) is capable in vitro of reversibly reducing the size of ULvWf multimeric forms released by endothelial cells into the somewhat smaller vWf multimers ordinarily in circulation. This activity has characteristics of a limited disulfide bond reductase. The process of ULvWf breakdown may be made irreversible by the tandem proteolysis, catalyzed by a vWf metalloproteinase, of partially reduced vWf multimers. Several patients with chronic relapsing TTP have decreased or absent plasma vWf metalloproteinase activity, apparently on a congenital basis. Adult initial episode and intermittent TTP patients have been found to have vWf metalloproteinase activity inhibited by an autoantibody during, but not after, TTP epidsodes.

Adult↗

A bone graft condensing syringe system for maxillofacial reconstructive surgery.

A new system of metallic syringes and pluggers specifically designed for delivery and condensation of particulate bone graft is reported, and the clinical application in maxillofacial reconstructive surgery is described. This bone graft condensing system has advantages over the conventional plastic injection syringes in enabling much better bone graft condensation as well as easier bone delivery and insertion of the syringe to the depth of the reconstruction crib.

Bone Transplantation↗

The clinical significance of fetal right heart enlargement with a structurally normal heart.

Isolated right heart enlargement of the fetus without cardiac structural abnormalities appears to be associated with growth retardation or abnormal perinatal outcome. We report the outcome of eight fetuses with subjective enlargement of the right heart. All cases were diagnosed antenatally from a standard four-chamber view on an ultrasound scan. All fetuses had otherwise normal cardiac anatomy. Seven out of the eight fetuses ultimately had outcomes which deviated from the norm. An isolated finding of fetal right heart enlargement warrants close antenatal fetal surveillance.

Female↗

Temperature and dimensional changes in the two-stage processing technique for complete dentures.

OBJECTIVES: This study concerned the temperature and linear dimensional change of heat-cured acrylic resin in the two-stage processing technique for complete dentures. METHODS: Thermocouples were incorporated in the acrylic resin for recording temperatures. Measurements between reference marks were made by a high-resolution digital measuring microscope. RESULTS: No increase in temperature associated with the exothermic nature of the polymerization reaction was recorded. The temperature of the resin followed the waterbath temperature closely. The temperatures recorded at various regions were in phase with each other. The total linear shrinkage of the base after two processing cycles was less than 1% and compares favourably with studies on the single-stage processing technique. CONCLUSIONS: Temperature differential is excluded as a reason for the warpage of dentures. The dimensional changes of the denture base resulting from the two-stage processing technique cannot be considered to be of any clinical significance.

Acrylic Resins↗

Prosthodontic aspects of a new method for functional reconstruction following maxillectomy.

The prosthodontic aspects of a new method of reconstruction after maxillectomy are described. A custom-made titanium mesh tray filled with crushed autogenous hip bone is interposed between two layers of a pedicled temporal muscle flap. The titanium mesh tray is fabricated on a cast carved to represent the anatomy of the reconstructed maxilla. The tray is designed so that, after healing, osseointegrated implants can be placed in preplanned positions in the reformed maxilla. The buccal sulcus is recreated with a free mucosal graft from the contralateral cheek at the second implant surgical stage. The prosthodontic restoration is completed after healing of the free mucosal graft.

Bone Transplantation↗

A reappraisal of indirect retention in removable partial dentures with long bilateral distal-extension saddles.

When only the six anterior teeth remain, it may appear that indirect retention cannot be achieved because the fulcrum line around which the denture may move when the distal extensions lift away from the mucosa is located behind the retentive tips of the clasps on the abutment teeth. This will be the case when the indirect retainer and the tips of the clasps are on the same level; however, if the tips of the clasps are nearer to the gingival margin than the indirect retainer, indirect retentive effects will be achieved.

Dental Clasps↗

Acrylic resin reinforced with chopped high performance polyethylene fiber--properties and denture construction.

A newly developed incremental mixing technique has been used to incorporate over 30 vol % chopped high performance polyethylene fiber into acrylic denture base resin. The reinforcement produced a substantial improvement in several clinically important properties, namely: 1) stiffness and impact strength were higher; 2) the mechanical properties were insensitive to notches that mimic anatomical features; and 3) samples damaged during bending and impact did not break up into separate fragments. Reinforced complete maxillary and mandibular dentures of good esthetic appearance were successfully manufactured and polished with conventional laboratory techniques.

Acrylic Resins↗

A computer-aided study of speaking spaces.

A computer-aided system was devised to investigate the speaking space. Thirty native Cantonese speakers with Class I occlusion were selected and test sentences were designed for speech analysis by a Sona-Graph. The investigation indicated that the sibilant sounds produced the closest speaking space and that the mean and the variability of the closest speaking space in Cantonese speakers were smaller than that in English speakers. The beliefs that the closest speaking space was smaller than that of the freeway space and that the speaking space of m sound was similar to the freeway space were not supported by this study.

Adult↗

Acrylic resins reinforced with woven highly drawn linear polyethylene fibres. 3. Mechanical properties and further aspects of denture construction.

Previous work has established the feasibility of producing acrylic denture bases reinforced with layers of highly drawn linear polyethylene fibres in a woven form. This paper reports on the mechanical properties of the system, including the effect of water conditioning. It is confirmed that substantial improvements in impact strength can be obtained by the incorporation of the polyethylene fibres in woven form. The fibre/resin integration within the dentures has also been studied by optical microscopy. It was found that delamination may occur during some processing stages and steps are suggested to avoid this problem.

Acrylic Resins↗

Shear stress-induced von Willebrand factor binding to platelet glycoprotein Ib initiates calcium influx associated with aggregation.

Platelets subjected to elevated levels of fluid shear stress in the absence of exogenous agonists will aggregate. Shear stress-induced aggregation requires von Willebrand factor (vWF) multimers, extracellular calcium (Ca2+), adenosine diphosphate (ADP), and platelet membrane glycoprotein (GP)Ib and GPIIb-IIIa. The sequence of interaction of vWF multimers with platelet surface receptors and the effect of these interactions on platelet activation have not been determined. To elucidate the mechanism of shear stress-induced platelet aggregation, suspensions of washed platelets were subjected to different levels of uniform shear stress (15 to 120 dyne/cm2) in an optically modified cone and plate viscometer. Cytoplasmic ionized calcium ([Ca2+]i) and aggregation of platelets were monitored simultaneously during the application of shear stress; [Ca2+]i was measured using indo-1 loaded platelets and aggregation was measured as changes in light transmission. Basal [Ca2+]i was approximately 60 to 100 nmol/L. An increase of [Ca2+]i (up to greater than 1,000 nmol/L) was accompanied by synchronous aggregation, and both responses were dependent on the shear force and the presence of vWF multimers. EGTA chelation of extracellular Ca2+ completely inhibited vWF-mediated [Ca2+]i and aggregation responses to shear stress. Aurin tricarboxylic acid, which blocks the GPIb recognition site on the vWF monomer, and 6D1, a monoclonal antibody to GPIb, also completely inhibited platelet responses to shear stress. The tetrapeptide RGDS and the monoclonal antibody 10E5, which inhibit vWF binding to GPIIb-IIIa, partially inhibited shear stress-induced [Ca2+]i and aggregation responses. The combination of creatine phosphate/creatine phosphokinase, which converts ADP to adenosine triphosphate and blocks the effect of ADP released from stimulated platelets, inhibited shear stress-induced platelet aggregation without affecting the increase of [Ca2+]i. Neither the [Ca2+]i nor aggregation response to shear stress was inhibited by blocking platelet cyclooxygenase metabolism with acetylsalicylic acid. These results indicate that GPIb and extracellular Ca2+ are absolutely required for vWF-mediated [Ca2+]i and aggregation responses to imposed shear stress, and that the interaction of vWF multimers with GPIIb-IIIa potentiates these responses. Shear stress-induced elevation of platelet [Ca2+]i, but not aggregation, is independent of the effects of release ADP, and both responses occur independently of platelet cyclooxygenase metabolism. These results suggest that shear stress induces the binding of vWF multimers to platelet GPIb and this vWF-GPIb interaction causes an increase of [Ca2+]i and platelet aggregation, both of which are potentiated by vWF binding to the platelet GPIIb-IIIa complex.

Adenosine Diphosphate↗

Reinforcement of complete denture bases with continuous high performance polyethylene fibers.

Clinical literature details the causes for deformation and failure of acrylic resin complete denture bases. These findings are used to select patterns of high performance polyethylene fiber reinforcement that would best use the properties of the material and improve the mechanical behavior of the prostheses. A technique is described for making reinforced maxillary and mandibular bases with the fibers placed as suggested by the analysis. Microscopic observations of cross sections of reinforced bases revealed good fiber/resin integration and polish.

Composite Resins↗

The effect of interface adhesion, water immersion and anatomical notches on the mechanical properties of denture base resins reinforced with continuous high performance polyethylene fibres.

Previous work has presented a study of the mechanical properties of denture base resins reinforced with a new type of high performance fibre. It is now shown that the substantial improvements demonstrated in those composites remain largely unaffected by a watery environment, anatomical notches, moulding pressure and other factors of denture construction. The understanding of the reinforced resins is here complemented with a detailed study of the interface strength, taking into account the various couplings occurring within the system.

Acrylic Resins↗

Acrylic resins reinforced with woven highly drawn linear polyethylene fibres. 2. Water sorption and clinical trials.

The results reported in this paper are part of a continuing study of the reinforcement of acrylic denture base resins with highly drawn linear polyethylene fibres. Water sorption is significantly reduced by incorporation of these fibres, even though the water diffusion processes as such remain broadly unaffected. Clinical trials are encouraging and the reinforced dentures have been well accepted by all the patients.

Acrylic Resins↗

The effect of highly drawn polyethylene fibres on the mechanical properties of denture base resins.

This paper reports on the effect of reinforcing dental resins with continuous, longitudinally oriented highly drawn linear polyethylene fibres. The mechanical properties were measured in 3-point bending, and the composites showed a very substantial improvement when compared with the properties of an unreinforced resin. The performance improves as the fibre content increases, and the type of resin does not appear to be a significant factor. It is shown that the inclusion of the reinforcement changes the mode of failure of the resin from brittle to ductile; that is, the system may be damaged but it does not disintegrate.

Composite Resins↗