Biomedical subjects

Takashi Buma

Publications and source records attributed to Takashi Buma.

3 recordsLinked to original sources

PubMed2004

Finite-element analysis of material and parameter effects in laser-based thermoelastic ultrasound generation.

Laser-based, thermoelastic transduction methods have potential in very high frequency (>50 MHz), high-density two-dimensional (2-D) arrays for a variety of very high-resolution superficial imaging applications, including in vivo tissue sectioning. Previous studies of these transducers generally have been based on experimental measurements or theoretical analyses using various simplifying assumptions. These theoretical models are mostly 1-D and best matched to simple geometries with a minimum number of component materials. In this work, we use a new thermoelastic solver in a commercially available finite-element analysis (FEA) software package to analyze multidimensional effects in laser-based devices of arbitrary geometry with the potential for use with arbitrary material properties. The FEA approach was verified first against experimental data. Thereafter, we explored the impact of various design variables, including laser spot size and laser penetration depth.

Anatomy, Cross-Sectional↗

PubMed2003

Thermoelastic expansion vs. piezoelectricity for high-frequency, 2-D arrays.

Optical generation using the thermoelastic effect has traditionally suffered from low conversion efficiency. We previously demonstrated increased efficiency of nearly 20 dB with an optical absorbing layer consisting of a mixture of polydimethylsiloxane (PDMS) and carbon black spin coated onto a glass microscope slide. In this paper we show that the radiated power from a black PDMS film is comparable to a 20 MHz piezoelectric two-dimensional (2-D) array element. Furthermore, we predict that a thermoelastic array element can produce similar acoustic power levels compared to ideal piezoelectric 2-D array elements at frequencies in the 100 MHz regime. We believe these results show that thermoelastic generation of ultrasound is a promising alternative to piezoelectricity for high-frequency, 2-D arrays.

Dimethylpolysiloxanes↗

PubMed2003

A high-frequency, 2-D array element using thermoelastic expansion in PDMS.

Optical generation of ultrasound is a promising alternative to piezoelectricity for high-frequency arrays. An array element is defined by the size and location of a laser beam focused on a suitable surface. Optical generation using the thermoelastic effect has traditionally suffered from low conversion efficiency. We previously demonstrated an increase in conversion efficiency of nearly 20 dB with an optical absorbing layer consisting of a mixture of polydimethylsiloxane (PDMS) and carbon black spin coated onto a glass microscope slide. Radiation pattern measurements with an 85 MHz spherically focused transducer indicated an array element size of 20 microm. These measurements lacked the spatial resolution required to reveal fine details in the radiated acoustic field. Here we report radiation pattern measurements with a 5-microm spatial sampling, showing that the radiated acoustic field is degraded by leaky Rayleigh waves launched from the PDMS/glass interface. We demonstrate that replacing the glass with a clear PDMS substrate eliminates the leaky Rayleigh waves, producing a broad and smooth radiation pattern suitable for a two-dimensional (2-D) phased array operating at frequencies greater than 50 MHz.

Computer Simulation↗