Biomedical subjects

Takashi Ushida

Publications and source records attributed to Takashi Ushida.

At least 19 recordsLinked to original sources

PubMed2007

Regeneration of the esophagus using gastric acellular matrix: an experimental study in a rat model.

Recently, tissue engineering of the autologous esophagus has been thought to provide a promising strategy for esophageal substitution. In this study, gastric acellular matrix (GAM) was used as a scaffold for regeneration of the esophagus in a rat model. Usage of GAM has an advantage that naturally derived extracellular matrix autograft can be prepared less invasively in a clinical setting. Twenty-seven F344 female rats were used as recipients. Patch defects created in the abdominal esophagus were replaced by GAM patch grafts. The rats were sacrificed 1 week to 18 months after implantation. The specimen was examined macroscopically as well as microscopically. 5'-Bromo-2'-deoxyuridine (BrdU) proliferation assay was performed in six rats that were sacrificed 1, 2, and 4 weeks after implantation. Twenty-four rats survived without complications. The graft site did not show esophageal stenosis or dilatation in any rat. Keratinized stratified squamous esophageal mucosa was regenerated in the entire graft 2 weeks after implantation. Regeneration of the muscle layer or lamina muscularis mucosae in the graft site was not observed even 18 months after implantation. Marked incorporation of BrdU was observed only in the mucosal layer but not in the muscle layer. GAM patch graft provided satisfactory mucosal regeneration of the esophagus without stenosis or dilatation, although muscle regeneration was still a future challenge.

Animals↗

PubMed2006

The state of the art of nanobioscience in Japan.

This paper reviews a part of the state of the art of nanobioscience in Japan. The importance of combination and integration of interdisciplinary principles is emphasized for the development of nanobioscience. Biomagnetics, biomechanics, nanomachining, self-replicating cell model, neuronal network, drug delivery system, and tissue engineering are discussed.

Biological Science Disciplines↗

PubMed2006

Impact of convective flow on the cellular uptake and transfection activity of lipoplex and adenovirus.

An in vitro cell culture model that mimics in vivo extracellular environment would be useful in developing in vivo gene delivery system. In the present study, a parallel flow model was applied to investigate the impact of convective flow on cellular uptake and transfection activity in endothelial cells. LipofectAMINE PLUS and adenovirus were used as model vectors, which bind cells via electrostatic- and ligand-receptor interactions, respectively. Whereas a convective flow increased the total amount of vector passing through the flow chamber by 3 orders of magnitude, uptake was increased by less than 10-fold, suggesting that the flow severely inhibited cellular uptake by reducing the retention time in the chamber and/or by diminishing the affinity between the cell and vector. Moreover, the uptake of both vectors was increased in a shear stress-dependent manner to a comparable extent, suggesting that the effect of flow on the cellular uptake was not significant. In contrast, transfection efficiency (TE), expressed as the transfection activity normalized by the cellular uptake of vectors was dramatically stimulated by shear stress, only when LipofectAMINE PLUS was used. Since the activities of the CMV promoter were unaffected by a shear stress, it is possible that altered intracellular trafficking may responsible for the improvement in lipoplex-mediated TE, presumably related to the cellular uptake pathway.

Adenoviridae↗

PubMed2006

Assessment of fixed charge density in regenerated cartilage by Gd-DTPA-enhanced MRI.

PURPOSE: Applying regenerated cartilage in a clinical setting requires noninvasive evaluation to detect the maturity of cartilage tissue. Magnetic resonance (MR) imaging of articular cartilage is well accepted and has been applied clinically in recent years. We attempt to establish a noninvasive method to evaluate the maturity of regenerated cartilage tissue using gadolinium-enhanced MR imaging. METHODS: To reconstruct cartilaginous tissue, we embedded articular chondrocytes harvested from bovine humeral head in agarose gel and cultured the cells in vitro up to 4 weeks. The fixed charge density (FCD) of the cartilage was determined using MRI gadolinium exclusion method. The sulfated glycosaminoglycan (sGAG) content was determined by dimethylmethylene blue dye-binding assay. RESULTS: The sGAG content and FCD of the regenerated cartilage increased with duration of culture. In the T1Gd maps, the [Gd-DTPA(2-)] in the specimen decreased, and the boundary between the sample disk and the bath solution of phosphate buffered saline (PBS) became clearer as time in culture increased. In the linear regression analysis, FCD and sGAG content correlated significantly. CONCLUSION: Gadolinium-enhanced MR imaging measurements can be useful predictors of the degree of cartilaginous tissue formation.

Animals↗

PubMed2005

Mechanical stretch inhibits myoblast-to-adipocyte differentiation through Wnt signaling.

Myoblasts are able to differentiate into other mesenchymal lineages including adipocytes and osteoblasts. However, it is not known how this differentiation is normally regulated in intact animals and humans. Here, we subjected cultured C2C12 myoblasts to cyclic mechanical stretch (20% elongation) during differentiation into adipocytes. Mechanical stretch inhibited the myoblast-to-adipocyte differentiation significantly, concurrent with an enhanced expression of Wnt10b mRNA. Inhibition of the Wnt signaling by incubation of the myoblasts with a soluble Wnt ligand, sFRP-2, abolished the inhibitory function of mechanical stretch on adipogenesis. These findings provide evidence that mechanical stretch inhibits myoblast-to-adipocyte differentiation possibly through Wnt signaling.

Adipocytes↗

PubMed2005

Culturing of skin fibroblasts in a thin PLGA-collagen hybrid mesh.

A thin biodegradable hybrid mesh of synthetic poly(DL-lactic-co-glycolic acid) (PLGA) and naturally derived collagen was used for three-dimensional culture of human skin fibroblasts. The hybrid mesh was constructed by forming web-like collagen microsponges in the openings of a PLGA knitted mesh. The behaviors of the fibroblasts on the hybrid mesh and PLGA knitted mesh were compared. The efficiency of cell seeding was much higher and the cells grew more quickly in the hybrid mesh than in the PLGA mesh. The fibroblasts in the PLGA mesh grew from the peripheral PLGA fibers toward the centers of the openings, while those in the hybrid mesh also grew from the collagen microsponges in the openings of the mesh resulting in a more homogenous growth. The proliferated cells and secreted extracellular matrices were more uniformly distributed in the hybrid mesh than in the PLGA mesh. Histological staining of in vitro cultured fibroblast/mesh implants indicated that the fibroblasts were distributed throughout the hybrid mesh and formed a uniform layer of dermal tissue having almost the same thickness as that of the hybrid mesh. However, the tissue formed in the PLGA mesh was thick adjacent to the PLGA fibers and thin in the center of the openings. Fibroblasts cultured in the hybrid mesh were implanted in the back of nude mouse. Dermal tissues were formed after 2 weeks and became epithelialized after 4 weeks. The results indicate that the web-like collagen microsponges formed in the openings of the PLGA knitted mesh increased the efficiency of cell seeding, improved cell distribution, and therefore facilitated rapid formation of dermal tissue having a uniform thickness. PLGA-collagen hybrid mesh may be useful for skin tissue engineering.

Absorbable Implants↗

PubMed2005

Reduced platelet adhesion to titanium metal coated with apatite, albumin-apatite composite or laminin-apatite composite.

Titanium metal coated with apatite (HA-Ti), albumin-apatite composite (AA-Ti) or laminin-apatite composite (LA-Ti) was prepared by the immersion of NaOH- and heat-treated titanium metal in a calcium phosphate solution, or one supplemented with albumin or laminin. Platelet adhesion to the obtained materials under flow conditions was investigated in real time using a cone- and plate-type viscometer and fluorescence labeled platelets. Adhesion and activation of the platelets on the HA-Ti, AA-Ti and LA-Ti were definitely suppressed as compared with those on untreated titanium metal with a mirror surface. Furthermore, the numbers of platelets adhered to AA-Ti and LA-Ti are smaller than those adhered to HA-Ti, although the differences were not statistically significant. These findings suggest that HA-Ti, AA-Ti and LA-Ti, especially AA-Ti and LA-Ti, would exhibit thromboresistance that is superior to commercially pure titanium metal in terms of platelet adhesion.

Adult↗

PubMed2004

Custom-shaping system for bone regeneration by seeding marrow stromal cells onto a web-like biodegradable hybrid sheet.

New bone for the repair or the restoration of the function of traumatized, damaged, or lost bone is a major clinical need, and bone tissue engineering has been heralded as an alternative strategy for regenerating bone. A novel web-like structured biodegradable hybrid sheet has been developed for bone tissue engineering by preparing knitted poly(DL-lactic-co-glycolic acid) sheets (PLGA sheets) with collagen microsponges in their openings. The PLGA skeleton facilitates the formation of the hybrid sheets into desired shapes, and the collagen microsponges in the pores of the PLGA sheet promote cell adhesion and uniform cell distribution throughout the sheet. A large number of osteoblasts established from marrow stroma adhere to the scaffolds and generate the desired-shaped bone in combination with these novel sheets. These results indicate that the web-like structured novel sheet shows promise for use as a tool for custom-shaped bone regeneration in basic research on osteogenesis and for the development of therapeutic applications.

Absorbable Implants↗

PubMed2003

The use of a novel PLGA fiber/collagen composite web as a scaffold for engineering of articular cartilage tissue with adjustable thickness.

It has been a great challenge to make the thickness of engineered cartilage adjustable to cover the range of both partial-thickness and full-thickness articular cartilage defects. We developed a novel kind of composite web scaffold that could be used for tissue enginnering of articular cartilage with the thickness adjustable between 200 microm and 8 mm. The composite web showed a unique structure having web-like collagen microsponges formed in the openings of a mechanically strong knitted mesh of poly(lactic-co-glycolic acid). The knitted mesh served as a skeleton reinforcing the composite web, while the web-like collagen microsponges facilitated cell seeding, cell distribution, and tissue formation. Bovine chondrocytes cultured in the composite web showed a spatially even distribution, maintained their natural morphology, and produced cartilaginous extracellular matrices such as type II collagen and aggrecan. The thickness of the implant can be simply adjusted by laminating or rolling the web sheets. Not only did the histological structure of the engineered cartilage patches match the bovine native articular cartilage, but also their dynamic complex modulus, structural stiffness, and phase lag reached 37.8, 57.0, and 86.3% of those of native bovine articular cartilage, respectively. The composite web could be an important scaffold for tissue engineering.

Aggrecans↗

PubMed2003

Redifferentiation of dedifferentiated bovine chondrocytes when cultured in vitro in a PLGA-collagen hybrid mesh.

Bovine articular chondrocytes dedifferentiated and lost their ability to express articular cartilage-specific extracellular matrices such as type II collagen and aggrecan when cultured in a culture flask during in vitro multiplication. A poly(DL-lactic-co-glycolic acid) (PLGA)-collagen hybrid mesh was prepared and used to redifferentiate the dedifferentiated cells. The two passaged dedifferentiated chondrocytes were seeded in a PLGA-collagen hybrid mesh and cultured in vitro in Dulbecco's modified Eagle's medium containing 10% fetal bovine serum. The cells adhered to the hybrid mesh, distributed evenly, and proliferated to fill the spaces in the scaffold. The gene expression of type I collagen, type II collagen, and aggrecan was analyzed after the cells were cultured in the hybrid mesh for 2-12 weeks. The expression of the gene encoding type I collagen was downregulated, whereas those of type II collagen and aggrecan were upregulated. Histological examination by hematoxylin-eosin and safranin O/fast green staining indicates that the cells regained their original round morphology. In addition, a homogeneous distribution of articular cartilage extracellular matrices was detected around the cells. These results suggest redifferentiation of the differentiated chondrocytes in the hybrid mesh. The hybrid mesh, which facilitated the redifferentiation of the dedifferentiated multiplied chondrocytes, would be an effective scaffold for the assembly of cells to regenerate three-dimensional cartilaginous tissue.

Aggrecans↗

PubMed2003

Use of isolated mature osteoblasts in abundance acts as desired-shaped bone regeneration in combination with a modified poly-DL-lactic-co-glycolic acid (PLGA)-collagen sponge.

Controlled regeneration of bone or cartilage has recently begun to facilitate a host of novel clinical treatments. An osteoblast line, which we isolated is able to form new bone matrix in vivo within 2 days and exhibits a mature osteoblast phenotype both in vitro and in vivo. Using these cells, we show that cuboidal bones can be generated into a predesigned shaped-bone with high-density bone trabeculae when used in combination with a modified poly-DL-lactic-co-glycolic acid (PLGA)-collagen sponge. PLGA coated with collagen gel serves as a good scaffold for osteoblasts. These results indicate that mature osteoblasts, in combination with a scaffold such as PLGA-collagen sponge, show promise for use in a custom-shaped bone regeneration tool for both basic research into osteogenesis and for development of therapeutic applications.

Absorbable Implants↗

PubMed2003

Tissue-engineered urinary bladder wall using PLGA mesh-collagen hybrid scaffolds: a comparison study of collagen sponge and gel as a scaffold.

PURPOSE: Tissue engineering of the urinary bladder using autologous cells and biodegradable scaffold is a promising method for augmentation. The authors developed 2 hybrid scaffolds by combining poly (DL-lactic-co-glycolic acid; PLGA) mesh for mechanical strength with collagen sponge or gel suitable for cell seeding. The aim of this study was to compare collagen as a scaffold between collagen sponge and gel and to construct a tissue-engineered urinary bladder wall utilizing these hybrid scaffolds. METHODS: The PLGA mesh-collagen hybrid scaffolds were prepared by introducing collagen sponge or gel into the PLGA knitted mesh. Urothelial and smooth muscle cells were obtained from porcine urinary bladder wall and were cultured in their respective media. The cells were seeded on these hybrid scaffolds. These constructs were analyzed morphologically and immunohistochemically. RESULTS: The urothelial layer was generated 3 dimensionally by culturing urothelial cells with PLGA mesh and collagen sponge. The smooth muscle layer was constructed by culturing smooth muscle cells with PLGA mesh and collagen gel. And a novel tissue-engineered urinary bladder wall was constructed laminating the urothelial and smooth muscle layers. CONCLUSIONS: Ex vivo construction of urinary bladder wall using hybrid scaffolds prepared by combining PLGA mesh with collagen sponge or gel was successful. This tissue-engineered urinary bladder wall allows easy handling and may become a promising tool for bladder augmentation.

Absorbable Implants↗

PubMed2003

Effects of transcutaneous topical injection of oxygen on vascular endothelial growth factor gene into the healing ligament in rats.

The effects of intermittent exposure to oxygen injection on an experimentally induced ligament tear were studied in the right hind limb of 17 male Sprague-Dawley rats. Two rats were used for monitoring the partial oxygen pressure (pO(2)) of subcutaneous tissue and 15 rats were divided into the following three groups of 5 after an experimentally induced ligament tear: Group A, control group; Group B, injection of 0.5 ml hyaluronan to the wound transcutaneously; Group C, injection of 0.5 ml hyaluronan mixed with haemoglobin and oxygen (n=5). At 7 days post-ligament injury, we compared the ligaments of the three treatment groups for gross appearance, histology and expression of vascular endothelial growth factor (VEGF) mRNA by RT-PCR. Our results indicate that the pO(2) was immediately elevated to 334.6 mmHg by topical oxygen injection and this method was effective in promoting vessel formation in comparison to the control group (p<0.01). However, the expression of VEGF mRNA in the topical oxygen injection group (Group C) was lower than that in control group (p<0.05). Our results suggest that oxygen is able to accelerate vessel formation in spite of its effect of decreasing VEGF mRNA. Our method of using topical injection proved to be useful in healing the ligament and the wound.

Administration, Cutaneous↗

PubMed2003

Rapid and large-scale formation of chondrocyte aggregates by rotational culture.

Chondrocytes in articular cartilage synthesize collagen type II and large sulfated proteoglycans, whereas the same cells cultured in monolayer (2D) dedifferentiate into fibroblastic cells and express collagen type I and small proteoglycans. On the other hand, a pellet culture system was developed as a method for preventing the phenotypic modulation of chondrocytes and promoting the redifferentiation of dedifferentiated ones. Because the pellet culture system forms only one cell aggregate each tube by a centrifugator, the pellet could not be applied to produce a tissue-engineered cartilage. Therefore, we tried to form chondrocyte aggregates by a rotational culture, expecting to form a large number of aggregates at once. In order to increase cell-cell interactions and decrease chondrocyte-material interaction, dishes with low retention of protein adsorption and cell adhesiveness were used. In addition, rotational shaking of the dish including cells was attempted to increase the cell-cell interaction. The shaking speed was set at 80 rpm, so the cells would be distributed in the center of the dish to augment the frequency of cell-cell contact. Under these conditions, bovine articular chondrocytes started aggregating in a few hours. At 24-36 h of rotational culture, aggregates with smooth surfaces were observed. Parameters such as increase of culture time and addition of TGF-beta controlled diameters of the aggregates. There were many fusiform cells at the periphery of the aggregates, where the cells tended to form a multilayered zone in cross sections. In addition, lacune-like structure, which was almost the same as pellet culture, was observed. It was found that the internal structure of the aggregates was similar to that of pellets reported previously. Therefore, the aggregates formed by a rotational culture could become an essential component to make tissue-engineered artificial cartilage.

Animals↗

PubMed2002

Hydrostatic fluid pressure enhances matrix synthesis and accumulation by bovine chondrocytes in three-dimensional culture.

Monolayer cell cultures and cartilage tissue fragments have been used to examine the effects of hydrostatic fluid pressure (HFP) on the anabolic and catabolic functions of chondrocytes. In this study, bovine articular chondrocytes (bACs) were grown in porous three-dimensional (3-D) collagen sponges, to which constant or cyclic (0.015 Hz) HFP was applied at 2.8 MPa for up to 15 days. The effects of HFP were evaluated histologically, immunohistochemically, and by quantitative biochemical measures. Metachromatic matrix accumulated around the cells within the collagen sponges during the culture period. There was intense intracellular, pericellular, and extracellular immunoreactivity for collagen type II throughout the sponges in all groups. The incorporation of [(35)S]-sulfate into glycosaminoglycans (GAGs) was 1.3-fold greater with constant HFP and 1.4-fold greater with cyclic HFP than in the control at day 5 (P < 0.05). At day 15, the accumulation of sulfated-GAG was 3.1-fold greater with constant HFP and 2.7-fold with cyclic HFP than the control (0.01). Quantitative immunochemical analysis of the matrix showed significantly greater accumulation of chondroitin 4-sulfate proteoglycan (C 4-S PG), keratan sulfate proteoglycan (KS PG), and chondroitin proteoglycan (chondroitin PG) than the control (P < 0.01). With this novel HFP culture system, 2.8 MPa HFP stimulated synthesis of cartilage-specific matrix components in chondrocytes cultured in porous 3-D collagen sponges.

Animals↗

PubMed2002

Effects of different exposures of hyperbaric oxygen on ligament healing in rats.

Hyperbaric oxygen (HBO) is a method of augmenting, intermittently, oxygen availability to tissues. We examined the effect of three different HBO exposures on the healing of experimentally induced ligament lacerations in the right hind limb of 44 male Wistar rats. Animals were divided into four groups after ligament injury: (a) control group, animals breathed room air at 1 ATA (atmosphere absolute) in a hyperbaric chamber for 60 min; (b) HBO treatment at 1.5 ATA for 30 min once a day, (c) HBO treatment at 2 ATA for 30 min once a day, (d) 2 ATA for 60 min once a day. At 14 days post-ligament injury, we compared the ligaments of the four treatment groups for gross appearance, histology and expression of pro-alpha(I) mRNA by northern hybridization. Our results indicate that HBO was effective in promoting ligament healing compared to control (p < 0.01). Of these three exposures, HBO at 2 ATA for 60 min was the most effective, resulting in enhanced extra-cellular matrix deposition as measured by collagen synthesis.

Animals↗

PubMed2002

Hybrid of gel-cultured smooth muscle cells with PLLA sponge as a scaffold towards blood vessel regeneration.

Although rapid formation of a smooth inner surface is important in constructing an artificial vascular graft, a conventional model that uses a biodegradable polymer such as poly-glycolic acid needs long-term culture to form it. In another model, which uses collagen gel, it is reported that prompt formation of the smooth inner surface was achieved. But the mechanical properties were not suitable, resulting in rupture under high pressure at the arterial level. Therefore, we propose a new artificial vascular graft model made of biodegradable polymer, gel, and cells. At first we manufactured an artificial vascular graft (i.d. 5 mm, o.d.7 mm) consisting of poly-L-lactic acid (PLLA) with open pore structures by using gas-forming methods. After mixing human normal aortic smooth muscle cells (SMCs) with type I collagen solution, pores of the PLLA scaffold were filled with the mixture. The collagen mixture was made into gel in the pores of the PLLA scaffold, incubating at 37 degrees C. WET-SEM analysis showed that the prompt formation of a smooth inner surface was achieved in the new model. The ratio of incorporation of SMCs into the artificial vascular graft became approximately 100% by using the cell-collagen mixture, whereas only 40% of SMCs were trapped in the conventional model where SMCs were inoculated as a cell-medium suspension. Therefore, it was suggested that the new artificial vascular graft model was superior in smooth inner surface formation and cell inoculation, compared with conventional models using either biodegradable polymer or gel.

Aorta↗

PubMed2002

Three-dimensional seeding of chondrocytes encapsulated in collagen gel into PLLA scaffolds.

Tissue engineering approaches have been clinically tried to repair damaged articular cartilages. It is an essential step to uniformly seed chondrocytes into 3D scaffolds in order to reconstruct tissue-engineered cartilages in vitro, but the tissue engineering could not have been provided with efficient cell seeding methods. Type I collagen is clinically used and known as a cytocompatible material, having recognition sites for integrins. Collagen gel encapsulating chondrocytes has been tried for making regenerated cartilages, but it is found difficult to have the gel keep its original shape after long-term culture, because of shrinking. On the other hand, 3D scaffolds, either of a nonwoven structure or a sponge-like structure, involve difficulty in that chondrocytes could not be uniformly seeded, although they have adequate initial mechanical properties. In this study, by combining collagen gelation with a nonwoven PLLA scaffold, we achieved uniform cell seeding into the 3D scaffold. Bovine articular chondrocytes were mixed with type I collagen solution, and the solution was poured into the nonwoven PLLA scaffold (1.5 mm thick, diameter 15 mm). The collagen-chondrocyte mixture was made into gel at 37 degrees C for 1 h. The 0.39% collagen mixture was viscous enough to prevent cells from precipitating during gelation. Almost all chondrocytes were able to be incorporated into the PLLA scaffolds by mixing with collagen solution and subsequently making into gel, while 30-40% of the chondrocytes seeded as a cell suspension were not trapped into the PLLA scaffolds. The method presented, where chondrocytes were mixed with collagen solution, and the mixture was incorporated into a 3D scaffold, then made into gel in the scaffold, could serve as an alternative for in vitro cartilage regeneration, also simultaneously having the advantages of both materials.

Animals↗