PubMed Health⌕ Search

Biomedical subjects

Tamer Akar

Publications and source records attributed to Tamer Akar.

10 recordsLinked to original sources
PubMed2006

Biosorption characteristics of Bacillus sp. ATS-2 immobilized in silica gel for removal of Pb(II).

The bacterial strain Bacillus sp. ATS-2 isolated from Pb(II) polluted soil was immobilized with a silica matrix and Pb(II) biosorption properties of immobilized biosorbent were examined. Optimum biosorption conditions were investigated in the fixed bed column with the variation in the parameters of pH, bed length, flow rate and influent concentration. The Pb(II) biosorption equilibrium was attained within 60 min and the maximum biosorption yield for silica gel immobilized Bacillus sp. ATS-2 was determined as 91.73% at pH 4.0. The higher biosorption yields were observed at flow rates of 60 and 180 ml h(-1). The optimum bed length for the column was found as 10 cm. Data obtained from batch studies were evaluated by Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherm models. The maximum monolayer capacity of Bacillus sp. ATS-2 for Pb(II) was 2.36 x 10(-5) mol g(-1). The involvement of the functional groups on the surface of immobilized cells in biosorption process was also evaluated by FTIR spectral analysis.

Bacillus↗
PubMed2006

Biosorption potential of the macrofungus Ganoderma carnosum for removal of lead(II) ions from aqueous solutions.

This paper reports the utilization of a macro-fungus Ganoderma carnosum as a biosorbent material for the removal of lead(II) ions from aqueous solutions. The biosorption potential of G. carnosum was investigated by batch experiments. The influences of physico-chemical parameters like pH, biosorbent dosage, contact time and initial metal ion concentration were evaluated. The biosorption equilibrium was attained in 10 minutes. Equilibrium biosorption data were analyzed by the Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherm models. Maximum biosorption capacity of biosorbent was found to be 22.79 mg g(-1) (1.10 x 10(-4) mol g(-1)) at the pH value of 5.0. The biosorbent was regenerated using 10 mM HCl solution, with up to 96% recovery, and reused four times in biosorption-desorption cycles successively. Biosorption efficiency of G. carnosum was also examined in a real effluent. The mechanism of the biosorption was investigated with FTIR, SEM and EDAX analysis and the findings suggested that the biosorption process involved in ion exchange as dominant mechanism as well as complexation. The ion exchange mechanism was also confirmed by the mean free energy value obtained from D-R isotherm model.

Cations↗
PubMed2005

Cadmium exposure from the cement dust emissions: a field study in a rural residence.

The cement dust is one of the causes of pollution in the environment. In the present study, the cadmium concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions were determined and also the blood concentrations and sensitivity conditions in humans residing in this rural area were investigated. The 108 soil (36 for control) and plant specimens were collected from eight different directions of the cement plant located in Cukurhisar town in Eskişehir city. Blood samples of the individuals residing in this area were taken from 258 subjects (258 for control) following a physical examination, and patch tests were also applied. The results show that the cadmium concentrations of the soil and plant specimens taken from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analysis of venous blood samples showed that cadmium concentrations were found to be within the reference values given for both groups, but higher in the subjects (p<0.001). According to the results of patch tests, sensitivity to cadmium was found to be more frequent for the subject group than the control group (p<0.05). Those results show that, although clinical tools revealed no toxic effects for the subject, except contact dermatitis, the cement plant increases cadmium pollution on the surrounding environment.

Adolescent↗
PubMed2005

Biosorption characteristics of Aspergillus flavus biomass for removal of Pb(II) and Cu(II) ions from an aqueous solution.

The Pb(II) and Cu(II) biosorption characteristics of Aspergillus flavus fungal biomass were examined as a function of initial pH, contact time and initial metal ion concentration. Heat inactivated (killed) biomass was used in the determination of optimum conditions before investigating the performance of pretreated biosorbent. The maximum biosorption values were found to be 13.46 +/- 0.99 mg/g for Pb(II) and 10.82 +/- 1.46 mg/g for Cu(II) at pH 5.0 +/- 0.1 with an equilibrium time of 2 h. Detergent, sodium hydroxide and dimethyl sulfoxide pretreatments enhanced the biosorption capacity of biomass in comparison with the heat inactivated biomass. The biosorption data obtained under the optimum conditions were well described by the Freundlich isotherm model. Competitive biosorption of Pb(II) and Cu(II) ions was also investigated to determine the selectivity of the biomass. The results indicated that A. flavus is a suitable biosorbent for the removal of Pb(II) and Cu(II) ions from aqueous solution.

Aspergillus flavus↗
PubMed2005

Zn(II) biosorption properties of Botrytis cinerea biomass.

The study was aimed of determining the Zn(II) sorption performance of Botrytis cinerea (B. cinerea) biomass as a new biosorbent. Heat inactivated biomass was used in the determination of optimum conditions. The rate and extent of accumulation were effected by pH, contact time and initial zinc ion concentrations. The uptake capacity of B. cinerea was increased by chemical and physical pretreatment of the cells when compared with the native biomass. The maximum removal of Zn(II) at pH 5.0-6.0 was found to be 12.98+/-0.9623 mg g-1 at initial Zn(II) ion concentration of 100 mg l-1 by heat inactivated biomass. Freundlich and Langmuir isotherm models were used to evaluate the data and regression constants were derived. The biosorbent was regenerated using 10 mM HCl solution, with up to 98% recovery and reused five times in biosorption-desorption cycles successively. Competitive biosorption experiments were performed with zinc in the presence of copper, cadmium and nickel ions simultaneously. The nature of the possible cell-metal ions interactions was also evaluated by chemical and instrumental analysis including infrared spectroscopy, scanning electron microscopy and X-ray energy dispersion analysis.

Adsorption↗
PubMed2005

Determination of the equilibrium, kinetic and thermodynamic parameters of adsorption of copper(II) ions onto seeds of Capsicum annuum.

Adsorption of copper ions onto Capsicum annuum (red pepper) seeds was investigated with the variation in the parameters of pH, contact time, adsorbent and copper(II) concentrations and temperature. The nature of the possible adsorbent and metal ion interactions was examined by the FTIR technique. The copper(II) adsorption equilibrium was attained within 60 min. Adsorption of copper(II) ions onto C. annuum seeds followed by the Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. Maximum adsorption capacity (q(max)) of copper(II) ions onto red pepper seeds was 4.47x10(-4) molg(-1) at 50 degrees C. Three kinetic models including the pseudo-first-order, pseudo-second-order and intraparticle diffusion equations were selected to follow the adsorption process. Kinetic parameters such as rate constants, equilibrium adsorption capacities and related correlation coefficients, for each kinetic model were calculated and discussed. It was indicated that the adsorption of copper(II) ions onto C. annuum seeds could be described by the pseudo-second-order kinetic model and also followed the intraparticle diffusion model up to 60 min, but diffusion is not only the rate controlling step. Thermodynamics parameters such as the change of free energy, enthalpy and entropy were also evaluated for the adsorption of copper(II) ions onto C. annuum seeds.

Capsicum↗
PubMed2005

Nickel exposure and its effects.

The aim of the study was to determine the nickel concentrations of soil and plant specimens taken from a rural area exposed to cement factory emissions and also to determine the blood concentrations and sensitivity conditions observed in humans residing in this rural area. The study was carried out in Cukurhisar, a town in Eskişehir-Turkey, between May 2000 and March 2001. Beside the 108 soil (36 for control) and plant specimens, which were taken from 8 directions from the cement factory, blood samples of the individuals residing in this area were taken from 258 subjects (258 for control) following a physical examination, and patch tests were also applied. The nickel concentrations of the soil and plant specimens taken from different places in different directions of the factory were higher than in the control areas. The physical examination of subjects did not reveal results different from those of the control group except for the diagnosis of contact dermatitis. The analyses of venous blood samples showed that nickel concentrations were found to be within the reference values given for both groups, but higher in the subjects (p < 0.001). According to the results of patch tests, sensitivity to nickel was found to be more frequent for the subject group than the control group (p < 0.05). According to these results, clinical tools revealed no toxic effects for the subjects, except contact dermatitis. However, sensitivity to patch tests showed that this subject group has been affected compared to the control group and that this effect increased with age.

Adolescent↗
PubMed2005

Nickel and cadmium concentrations in plasma and Na+/K+ ATPase activities in erythrocyte membranes of the people exposed to cement dust emissions.

The aim of this study was to determine the concentrations of nickel and cadmium in blood plasma of the people exposed to cement dust emissions and to investigate the effects of exposure period on the activities of Na+/K+ ATPase enzymes in their erythrocyte membranes. The study was carried out on people living in Eskişehir Cukurhisar rural area, located near a cement factory. Blood samples of the individuals residing in this area were taken from 80 subjects (30 for control) following a physical examination. The analysis of plasma samples showed that nickel concentrations in subject group were found to be significantly higher than those of the control group (p < 0.001). Cadmium concentrations were found to be within the reference values for both group and no difference was found between the subjects and controls (p > 0.05). Furthermore, no correlation was observed between the levels of Na+/K+ ATPase activity in erythrocyte membranes of the subject group and the ages of people living in the region (p > 0.05, r = 0.133). It was also observed that nickel concentrations increased by age (p < 0.001, r = 0.646) while no effect was observed in means of cadmium. Na+/K+ ATPase activities in the erythrocyte membranes were not affected. In conclusion although there was no difference between the Na+/K+ ATPase activity in means of age, there was an environmental pollution and may be it was due to the industrial plant.

Adult↗
PubMedDate not supplied

Synthesis and evaluation of demethoxyviridin derivatives as potential antimicrobials.

The in vitro antibacterial and antifungal activities of demethoxyviridin and some synthetic analogues were evaluated by the agar diffusion method. The minimum inhibitory concentrations (MIC) of the active compounds were also determined by the agar dilution method. Demethoxyviridin (1) showed moderate antibacterial activity against most of the strains tested. 1alpha-Hydroxydemethoxyviridin (3) showed antibacterial activity and the most potent in vitro antifungal activity with MIC of 20 microg/ml (0.062 mM) against Aspergillus niger, A. fumigatus, A. flavus, A. parasiticus, Fusarium solani, F. graminarum, Geotrichum candidum whereas 5'-methylfuro-(4',3',2'-4,5,6)androst-5-ene-3,17-dione (7) exhibited very weak antifungal activity against Candida albicans only.

Androstenes↗