Biomedical subjects

Tamer Baykara

Publications and source records attributed to Tamer Baykara.

11 recordsLinked to original sources

PubMed2006

Investigation of pluronic and PEG-PE micelles as carriers of meso-tetraphenyl porphine for oral administration.

Meso-tetraphenyl porphine (mTPP) is a highly lipophilic, fluorescent porphyrin derivate and it is used as photosensitizer on the treatment of malign neoplasms. The aim of this study was to prepare mTPP loaded pluronic F127 and polyethylene glycol-distearoyl phosphatidylethanolamine (PEG(2000)-DSPE) micelles to evaluate polymeric micelles potential for the transport of drugs through intestinal mucosa. Transport and bioadhesion behaviors of polymeric micelles was investigated using Caco-2 cell monolayer and everted rat intestine models. In order to show that Caco-2 cells can be used as a transport model cytotoxicity of formulations was tested. Cell viability was more than 80%, showing that Caco-2 cells will keep their viability during the transport studies demonstrating that prepared formulations can be securely used as oral drug carrier systems. Plain micelles were labeled with a fluorescent agent rhodamine-phosphatidylethanolamine (Rh-PE) and their transport through Caco-2 cells was investigated beside mTPP loaded micelles. At the end of 4h transport study through Caco-2 cells, cumulative transport (%) of fluorescent agents were around 14% and 1% in Rh-PE labeled and mTPP loaded micelles This difference was attributed to the different placement of mTPP and Rh-PE in the micellar core. Drug transport was not estimated in everted rat intestine model but the bioadhesion was 79% and 70% for mTPP loaded pluronic F127 and PEG(2000)-DSPE micelles. These good bioadhesion rates are promising for oral drug delivery.

Administration, Oral↗

PubMed2006

Preparation and characterization of polymeric micelles for solubilization of poorly soluble anticancer drugs.

The objective of this study is to investigate the solubilization of poorly water-soluble anticancer drugs, octaethylporphine (OEP), meso-tetraphenyl porphine (mTPP) and camptothecin (CPT), in Pluronic and polyethylene glycol-distearoylphosphatidylethanolamine (PEG-DSPE) polymeric micelles. Three different Pluronic and PEG-DSPE polymers with various chain lengths were chosen and micelle formulations were prepared by using various drug:polymer ratios. Formulations were characterized by critical micellization concentration (CMC) values of copolymers, micelle particle size and distribution, zeta potential, loading efficiency and stability. Polymers formed very stable, low CMC micelles with smaller sizes than 100 nm. It was shown that drug loading efficiency highly depends on the polymer type, drug type and their ratios. The most efficient drug loading was obtained by loading mTPP in PEG2000-DSPE and Pluronic F127 micelles. This result is attributed to phenyl groups in mTPP might lead to attraction between alkyl groups in the polymer and increase drug incorporation. PEG-DSPE formulations had higher zeta potential values indicating that they would be more stable against aggregation than Pluronic micelles. From the drug assay aspect Pluronic micelles remained more stable in 3-month long stability test. These results showed that besides their solubilizing effects, polymeric micelles could be useful as novel drug carriers for hydrophobic drugs.

Antineoplastic Agents↗

PubMed2006

Influence of aluminum tristearate and sucrose stearate as the dispersing agents on physical properties and release characteristics of eudragit RS microspheres.

The purpose of this research was to investigate the effects of different concentrations of polymer and sucrose stearate, aluminum tristearate as dispersing agents on microsphere properties and performance. The yield values of microspheres were over the 78%, and the encapsulation efficiencies were found to be approximately 73%. Particle sizes of microspheres prepared with aluminum tristearate were between 76 and 448 microm, while that of the microspheres containing sucrose stearate were between 521 and 2000 microm. Morphological and physicochemical properties of microspheres were investigated by scanning electron micrography and differential scanning calorimetry (DSC). DSC analysis indicated that verapamil hydrochloride formed a solid solution with acrylic polymers. In vitro release studies were performed using the flow-through cell method. While approximately 80% of drug was released from the microspheres containing aluminum tristearate in 480 minutes, the same amount of drug was released from microspheres containing sucrose stearate in only 60 minutes. Chemical structures and concentrations of the dispersing agents were clearly effective on the physical properties of microspheres and their drug-release characteristics.

Acrylic Resins↗

PubMed2005

Improved solubility and dissolution rate of piroxicam using gelucire 44/14 and labrasol.

Piroxicam is a nonsteroidal anti-inflammatory drug that is characterized by low solubility-high permeability. The present study was designed to improve the dissolution rate of piroxicam at the physiological pH's through its increased solubility by preparing semi-solid dispersions of drug using Gelucires and Labrasol. These excipients are essentially characterized by their melting points and HLB (hydrophilic-lipophilic balance) values. The dissolution tests of the preparations were performed in the media with different pH's. Differential scanning calorimetry (DSC), were used to examine the interaction between piroxicam and excipients. Gelucire 44/14 and Labrasol at the concentration of 15% w/v in water provided 20- and 50-fold increase in the solubility of piroxicam, respectively. The semi-solid dispersion containing 1/20 of drug/excipient mixture (20% Gelucire 44/14 and 80% Labrasol in w/w) produced the dissolution not less than 85% of piroxicam within 30 min in each dissolution media (simulated gastric fluid (SGF), pH 1.2; phosphate buffers, pH 4.5 and 6.8; and water). DSC analysis of this semi-solid dispersion indicated that there was no chemical reaction between the drug and excipients, and that a solid-state solution of piroxicam with excipient formed.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2004

In vitro and ex vivo permeation studies of chlorpheniramine maleate gels prepared by carbomer derivatives.

The antihistaminic chlorpheniramine maleate (CPM) is used for symptomatic relief of hypersensitivity reactions and in pruritic skin disorders. At present, the drug is marketed in tablet, capsule, syrup, cream, and injectable dosage forms. Chlorpheniramine maleate has some side effects when taken orally. Due to its first pass effect, only 25%-45% of the orally administered dose reaches the blood circulation. To bypass these disadvantages, we aimed to investigate percutaneous absorption of CPM from gel formulations prepared with different carbomer derivatives (Carbopol 934, 940, 941, 2984, 980, and 981; main differences are related to presence of a comonomer and cross-link density). Cellulose membrane was used as the diffusion barrier for all the formulations' drug-release studies. The release of active substance from carbopol derivatives, which have the least cross-linking density (Carbopol 941 and 981) was found to be numerically higher than the others. The formulation (F8; 1% Carbopol 941) that exhibited the maximum drug release through the cellulose membrane was further studied for drug release by using polyurethane membrane, excised rat skin, and human skin. The penetration of the active substance through different diffusion barriers was found to be statistically different (p<0.05) when compared. Of all the different diffusion barriers, rat skin gave the closest results to human skin. Thus topical application of CPM in the carbomer gel may be of potential use for local activity. The type and concentration of carbomers can affect drug release. The synthetic membranes are useful in assessments of formulations in quality assurance but they do not give definite indication of how a formulation will behave when it is used on skin.

Acrylic Resins↗

PubMed2003

The effect of the drug/polymer ratio on the properties of the verapamil HCl loaded microspheres.

In this study, the microspheres containing verapamil hydrochloride (VRP) were prepared with Eudragit RS 100 by solvent evaporation method. In the solvent evaporation method one of the parameters which affect to the formation and properties of the microspheres is the variations of drug/polymer ratios. The aim of our study is to examine the effects of this parameter on the VRP loaded microspheres. To achieve this purpose, only drug/polymer ratio was altered while the other formulation parameters were kept constant and percentage yield value, incorporation efficiency, particle size and distribution of the microspheres were analyzed and micrographs of the microspheres were taken to determine the effects of the increase in the polymer amount of formulations. All the dispersed phase viscosities were evaluated by comparing them with the variations in particle size and distribution of the microspheres. In vitro dissolution tests were done by using dissolution media with three different pH in sequence as half-change method with flow through cell and the effect of the variation in polymer ratio on drug dissolution was evaluated according to dissolution test results. As a result of our study, it is thought that the variation in drug/polymer ratios might have an influence on the physical characteristics of the microspheres and the increasing amount of polymer might be result in decreased drug dissolve.

Chemistry, Pharmaceutical↗

PubMed2003

Preparation and in vitro evaluation of modified release ketoprofen microsponges.

Microsponges containing ketoprofen and Eudragit RS 100 were prepared by quasi-emulsion solvent diffusion method. The effects of different mixing speeds, drug-polymer ratios, solvent-polymer ratios on the physical characteristics of the microsponges as well as the in vitro release rate of the drug from the microsponges were investigated. All the factors studied had an influence on the physical characteristics of the microsponges. In vitro dissolution results showed that the release rate of ketoprofen was modified in all formulations.

Acrylic Resins↗

PubMed2003

In vitro release studies of chlorpheniramine maleate from gels prepared by different cellulose derivatives.

The objective of this study was to evaluate the in vitro and ex vivo percutaneous absorption of chlorpheniramine maleate (CPM) from different hydrogel formulations. Various concentrations of polymers, including hydroxypropylmethylcellulose (HPMC), sodium carboxymethylcellulose (NaCMC) and methyl cellulose (MC) were used in the hydrogel formulations. All experiments were conducted using cellulose dialysis membrane. The passive permeation of CPM was affected by the polymer concentrations. The effect of each polymer on the release rate of CPM was found to be statistically different (P<0.05). The formulation which exhibited maximum drug release through cellulose membrane was then used with other membranes namely polyurethane membrane, rat skin and human skin. The release rate of CPM from different membranes was found to be statistically different (P<0.05). Within the different diffusional barriers rat skin was found to be best alternative to human skin. It seems suitable the use of cellulose derivatives for topical application of CPM to obtain high therapeutic concentration at the application site. The synthetic membranes can be used to assess product performance in quality assurance but give little indication of its performance ex vivo.

Animals↗

PubMed2003

Enhanced bioavailability of piroxicam using Gelucire 44/14 and labrasol: in vitro and in vivo evaluation.

Piroxicam is a non-steroidal anti-inflammatory drug that is characterized by low solubility and high permeability. The purpose of the study was to investigate the in vitro and in vivo performance of the semi-solid dispersion prepared with Gelucire 44/14 and Labrasol into hard gelatin capsules (GL) for enhancing the dissolution rate of the drug. The results were evaluated by comparing with pure piroxicam filled into hard gelatin capsules (PP) and a commercially available tablet dosage form containing a piroxicam:beta-cyclodextrin complex (CD). The in vitro dissolution testing of the dosage forms was performed in different media (simulated gastric fluid, pH 1.2; phosphate buffers, pH 4.5 and 6.8; and water). Amongst the dosage forms, GL provided at least 85% piroxicam dissolution within 30 min in each of the media, behaving like a fast-dissolving immediate release drug product. Oral bioavailability of 20 mg piroxicam in GL, CD, and PP was compared after administration of a single dose to eight healthy volunteers. Three treatments were administered in crossover fashion, separated by a washout period of 2 weeks. Piroxicam was monitored in plasma by high-performance liquid chromatography. The apparent rate of absorption of piroxicam from GL (Cmax=2.64 micrograms/ml, tmax=82.5 min) was significantly higher than that of the PP (Cmax=0.999 micrograms/ml, tmax=144 min) (P<0.05) and similar to that of CD (Cmax=2.44 micrograms/ml, tmax=120 min) (P>0.05). The relative bioavailability values as the ratios of mean total AUC for GL relative to PP and CD, were 221 and 98.6%. Piroxicam is characterized by a slow and gradual absorption via the oral route and this causes a delayed onset of therapeutic effect. Thus, plain piroxicam preparations are not indicated for analgesia. The results of the in vivo study revealed that the GL dosage form would be advantageous with regards to rapid onset of action, especially in various painful conditions where an acute analgesic effect is desired.

Adult↗

PubMed2003

Comparative evaluation of granules made with different binders by a fluidized bed method.

Granules were prepared using three different binders, pregelatinized starch (PGS), gelatin (GEL), and polyvinylpyrrolidone (K30) by a fluidized bed method. As a quantitative measurement of mechanical strength or abrasion resistance, granules were subjected to a friability test for certain periods of time, and friability indexes (FI) as a function of time were calculated. The data obtained were analyzed by applying standard mathematical models. According to the derived parameters of the logistic and Weibull models, which fit best to the data, mechanical strength of granules made with K30 was observed to be lower than that of the granules of PGS and GEL which have similar values of model parameters. Flow properties, consolidation, and compressibility behaviors of unfriabled (UFR) and friabled (FR) granules, which were selected based upon their Weibull time parameter, were investigated as comparative. The flow rate of granules decreased due to diminishing particle size depending on binder type and friability, but the values of angle of repose were within the acceptable limits. Regarding consolidation behavior, the change of relative density vs. the number of taps, i.e., packing rate for FR granules of GEL was slower than that of its UFR form, whereas FR granules of PGS and K30 showed faster change in relative density compared to their UFR forms. According to the parameters obtained from the Heckel equation, PGS and K30 were found to produce softer, more plastic and readily deformable granules than GEL, and the compressibility of their FR forms was not influenced negatively.

Drug Design↗

PubMed2002

The effects of pressure and direct compression on tabletting of microsponges.

Microsponges are porous, polymeric microspheres that are used mostly for topical and recently for oral administration. Ketoprofen was used as a model drug for systemic drug delivery of microsponges in the study. Ketoprofen microsponges were prepared by quasi-emulsion solvent diffusion method with Eudragit RS 100 and afterwards tablets of microsponges were prepared by direct compression method. Different pressure values were applied to the tablet powder mass in order to determine the optimum pressure value for compression of the tablets. Results indicated that microsponge compressibility was much improved over the physical mixture of the drug and polymer and owing to the plastic deformation of sponge-like structure, microsponges produce mechanically strong tablets.

Acrylic Resins↗