Biomedical subjects

Tetsuya Tateishi

Publications and source records attributed to Tetsuya Tateishi.

At least 19 recordsLinked to original sources

PubMed2006

pH-responsive swelling behavior of collagen gels prepared by novel crosslinkers based on naturally derived di- or tricarboxylic acids.

The aim of this study was to compare the physicochemical properties of alkali-treated collagen (AlCol) gels prepared using two kinds of naturally derived crosslinkers made from citric and malic acids (CAD and MAD, respectively) that we have developed. From the crosslinking reaction between active ester groups and amino groups of AlCol, we successfully obtained AlCol gels, named AlCol-CAD and AlCol-MAD, prepared using CAD and MAD, respectively. The gelation time of the AlCol solution containing CAD initially decreased with increasing CAD concentration up to 70 mM, and then increased as the CAD concentration increased further. The gelation time reached its minimum and began to increase. On the other hand, for AlCol-MAD solution, gelation occurred within 40s at any MAD concentration. Moreover, the residual amino groups in AlCol-CAD and AlCol-MAD were found to decrease with increasing CAD or MAD concentrations, whereas increased residual carboxyl groups were detected only in the case of AlCol-CAD. The swelling ratio of AlCol-CAD significantly increased at CAD concentrations above 50mM. On the other hand, AlCol-MAD showed little increase in swelling ratio with increasing MAD concentration. Also, AlCol-CAD was swollen when the gels were immersed in a solution with high pH. On the other hand, no significant increase in swelling ratio was observed when AlCol-MAD was immersed in a similar solution. These results suggest that the different amounts of carboxyl groups in AlCol-CAD affected the swelling behavior of gels and that this pH-responsive AlCol-CAD has potential for drug delivery systems and tissue engineering.

Collagen↗

PubMed2006

Synthesis of polypyridine-graft-PEG copolymer for protein repellent and stable interface.

Polypyridine grafted with poly(ethylene glycol) (Py-g-PEG) have been synthesized. Radical copolymerization of methyl-terminated PEG macromonomer with 4-pyridylmethyl methacrylate homogeneously proceeded and the obtained copolymer spontaneously adsorbs from aqueous solution onto gold surfaces, where the pyridine parts act as the multipoint anchor to the surface and the PEG parts provide the strong steric repulsion between the chains. As a result, the highly protein repellent and stable surface was constructed through multipoint pyridine attachment as compared with singlepoint pyridine attachment. Py-g-PEGs thus synthesized are promising material to functionalize metal and semiconductor material and to self-assemble into micelle in biotechnological and biomedical field.

Adsorption↗

PubMed2006

Assessment of fixed charge density in regenerated cartilage by Gd-DTPA-enhanced MRI.

PURPOSE: Applying regenerated cartilage in a clinical setting requires noninvasive evaluation to detect the maturity of cartilage tissue. Magnetic resonance (MR) imaging of articular cartilage is well accepted and has been applied clinically in recent years. We attempt to establish a noninvasive method to evaluate the maturity of regenerated cartilage tissue using gadolinium-enhanced MR imaging. METHODS: To reconstruct cartilaginous tissue, we embedded articular chondrocytes harvested from bovine humeral head in agarose gel and cultured the cells in vitro up to 4 weeks. The fixed charge density (FCD) of the cartilage was determined using MRI gadolinium exclusion method. The sulfated glycosaminoglycan (sGAG) content was determined by dimethylmethylene blue dye-binding assay. RESULTS: The sGAG content and FCD of the regenerated cartilage increased with duration of culture. In the T1Gd maps, the [Gd-DTPA(2-)] in the specimen decreased, and the boundary between the sample disk and the bath solution of phosphate buffered saline (PBS) became clearer as time in culture increased. In the linear regression analysis, FCD and sGAG content correlated significantly. CONCLUSION: Gadolinium-enhanced MR imaging measurements can be useful predictors of the degree of cartilaginous tissue formation.

Animals↗

PubMed2005

Mechanical stretch inhibits myoblast-to-adipocyte differentiation through Wnt signaling.

Myoblasts are able to differentiate into other mesenchymal lineages including adipocytes and osteoblasts. However, it is not known how this differentiation is normally regulated in intact animals and humans. Here, we subjected cultured C2C12 myoblasts to cyclic mechanical stretch (20% elongation) during differentiation into adipocytes. Mechanical stretch inhibited the myoblast-to-adipocyte differentiation significantly, concurrent with an enhanced expression of Wnt10b mRNA. Inhibition of the Wnt signaling by incubation of the myoblasts with a soluble Wnt ligand, sFRP-2, abolished the inhibitory function of mechanical stretch on adipogenesis. These findings provide evidence that mechanical stretch inhibits myoblast-to-adipocyte differentiation possibly through Wnt signaling.

Adipocytes↗

PubMed2005

Culturing of skin fibroblasts in a thin PLGA-collagen hybrid mesh.

A thin biodegradable hybrid mesh of synthetic poly(DL-lactic-co-glycolic acid) (PLGA) and naturally derived collagen was used for three-dimensional culture of human skin fibroblasts. The hybrid mesh was constructed by forming web-like collagen microsponges in the openings of a PLGA knitted mesh. The behaviors of the fibroblasts on the hybrid mesh and PLGA knitted mesh were compared. The efficiency of cell seeding was much higher and the cells grew more quickly in the hybrid mesh than in the PLGA mesh. The fibroblasts in the PLGA mesh grew from the peripheral PLGA fibers toward the centers of the openings, while those in the hybrid mesh also grew from the collagen microsponges in the openings of the mesh resulting in a more homogenous growth. The proliferated cells and secreted extracellular matrices were more uniformly distributed in the hybrid mesh than in the PLGA mesh. Histological staining of in vitro cultured fibroblast/mesh implants indicated that the fibroblasts were distributed throughout the hybrid mesh and formed a uniform layer of dermal tissue having almost the same thickness as that of the hybrid mesh. However, the tissue formed in the PLGA mesh was thick adjacent to the PLGA fibers and thin in the center of the openings. Fibroblasts cultured in the hybrid mesh were implanted in the back of nude mouse. Dermal tissues were formed after 2 weeks and became epithelialized after 4 weeks. The results indicate that the web-like collagen microsponges formed in the openings of the PLGA knitted mesh increased the efficiency of cell seeding, improved cell distribution, and therefore facilitated rapid formation of dermal tissue having a uniform thickness. PLGA-collagen hybrid mesh may be useful for skin tissue engineering.

Absorbable Implants↗

PubMed2005

Reduced platelet adhesion to titanium metal coated with apatite, albumin-apatite composite or laminin-apatite composite.

Titanium metal coated with apatite (HA-Ti), albumin-apatite composite (AA-Ti) or laminin-apatite composite (LA-Ti) was prepared by the immersion of NaOH- and heat-treated titanium metal in a calcium phosphate solution, or one supplemented with albumin or laminin. Platelet adhesion to the obtained materials under flow conditions was investigated in real time using a cone- and plate-type viscometer and fluorescence labeled platelets. Adhesion and activation of the platelets on the HA-Ti, AA-Ti and LA-Ti were definitely suppressed as compared with those on untreated titanium metal with a mirror surface. Furthermore, the numbers of platelets adhered to AA-Ti and LA-Ti are smaller than those adhered to HA-Ti, although the differences were not statistically significant. These findings suggest that HA-Ti, AA-Ti and LA-Ti, especially AA-Ti and LA-Ti, would exhibit thromboresistance that is superior to commercially pure titanium metal in terms of platelet adhesion.

Adult↗

PubMed2004

Chondrogenic differentiation of human mesenchymal stem cells cultured in a cobweb-like biodegradable scaffold.

Human mesenchymal stem cells (MSCs) were cultured in vitro in a cobweb-like biodegradable polymer scaffold: a poly(dl-lactic-co-glycolic acid)-collagen hybrid mesh in serum-free DMEM containing TGF-beta3 for 1-10 weeks. The cells adhered to the hybrid mesh, distributed evenly, and proliferated to fill the spaces in the scaffold. The ability of the cells to express gene encoding type I collagen decreased, whereas its ability to express type II collagen and aggrecan increased. Histological examination by HE staining indicated that the cells showed fibroblast morphology at the early stage and became round after culture for 4 weeks. The cartilaginous matrices were positively stained by safranin O and toluidine blue. Immunostaining with anti-type II collagen and anti-cartilage proteoglycan showed that type II collagen and cartilage proteoglycan were detected around the cells. In addition, a homogeneous distribution of cartilaginous extracellular matrices was detected around the cells. These results suggest the chondrogenic differentiation of the mesenchymal stem cells in the hybrid mesh. The PLGA-collagen hybrid mesh enabled the aggregation of mesenchymal stem cells and provided a promotive microenvironment for the chondrogenic differentiation of the MSCs.

Absorbable Implants↗

PubMed2004

Growth factor combination for chondrogenic induction from human mesenchymal stem cell.

During the last decade, many strategies for cartilage engineering have been emerging. Stem cell induction is one of the possible approaches for cartilage engineering. The mesenchymal stem cells (MSCs) with their pluripotency and availability have been demonstrated to be an attractive cell source. It needs the stimulation with cell growth factors to make the multipluripotent MSCs differentiate into chondrogenic lineage. We have shown particular patterns of in vitro chondrogenesis induction on human bone marrow MSCs (hBMSCs) by cycling the growth factors. The pellet cultures of hBMSCs were prepared for chondrogenic induction. Growth factors: TGF-beta3, BMP-6, and IGF-1 were used in combination for cell induction. Gene expression, histology, immunohistology, and real-time PCR methods were measured on days 21 after cell induction. As shown by histology and immunohistology, the induced cells have shown the feature of chondrocytes in their morphology and extracellular matrix in both inducing patterns of combination and cycling induction. Moreover, the real-time PCR assay has shown the expression of gene markers of chondrogenesis, collagen type II and aggrecan. This study has demonstrated that cartilage tissue can be created from bone marrow mesenchymal stem cells. Interestingly, the combined growth factors TGF-beta3 and BMP-6 or TGF-beta3 and IGF-1 were more effective for chondrogenesis induction as shown by the real-time PCR assay. The combination of these growth factors may be the important key for in vitro chondrogenesis induction.

Cartilage↗

PubMed2004

Custom-shaping system for bone regeneration by seeding marrow stromal cells onto a web-like biodegradable hybrid sheet.

New bone for the repair or the restoration of the function of traumatized, damaged, or lost bone is a major clinical need, and bone tissue engineering has been heralded as an alternative strategy for regenerating bone. A novel web-like structured biodegradable hybrid sheet has been developed for bone tissue engineering by preparing knitted poly(DL-lactic-co-glycolic acid) sheets (PLGA sheets) with collagen microsponges in their openings. The PLGA skeleton facilitates the formation of the hybrid sheets into desired shapes, and the collagen microsponges in the pores of the PLGA sheet promote cell adhesion and uniform cell distribution throughout the sheet. A large number of osteoblasts established from marrow stroma adhere to the scaffolds and generate the desired-shaped bone in combination with these novel sheets. These results indicate that the web-like structured novel sheet shows promise for use as a tool for custom-shaped bone regeneration in basic research on osteogenesis and for the development of therapeutic applications.

Absorbable Implants↗

PubMed2003

Osteogenic differentiation of cultured rat and human bone marrow cells on the surface of zinc-releasing calcium phosphate ceramics.

Rat and human bone marrow cells (BMCs) were cultured on a composite ceramic of zinc-containing beta-tricalcium phosphate and hydroxyapatite (ZnTCP/HAP) with a (Ca+Zn)/P molar ratio of 1.60 and varying zinc contents. After a 2-week culture of the BMCs in the presence of beta-glycerophosphate and dexamethasone, many macroscopic mineralized areas with high alkaline phosphatase (ALP) activity were seen on the ZnTCP/HAP ceramic disks. The ALP activity increased with increasing zinc content in the ceramics. The highest ALP activity was observed when the BMCs were cultured on the ceramics with 1.26 wt % zinc, and the ceramics released zinc ions at concentrations from 2.2 to 7.2 microg/mL into the culture medium. Zinc ions were incorporated into mineralized areas produced by BMCs. BMCs also were directly cultured onto the culture dish surface, and the addition of 100 microM of free ZnCl(2) (6.5 microg/mL) to the culture medium significantly increased the ALP activity of the BMCs relative to the culture medium without the ZnCl(2)addition. The maximum zinc concentration required to enhance mineralization was higher in human BMCs than in rat BMCs. The present study demonstrates the superiority of ZnTCP/HAP ceramics over TCP/HAP in supporting the osteogenic differentiation of BMCs, and thus these ceramics are safe and useful in clinical settings, such as for bone reconstructive surgery.

Alkaline Phosphatase↗

PubMed2003

The use of a novel PLGA fiber/collagen composite web as a scaffold for engineering of articular cartilage tissue with adjustable thickness.

It has been a great challenge to make the thickness of engineered cartilage adjustable to cover the range of both partial-thickness and full-thickness articular cartilage defects. We developed a novel kind of composite web scaffold that could be used for tissue enginnering of articular cartilage with the thickness adjustable between 200 microm and 8 mm. The composite web showed a unique structure having web-like collagen microsponges formed in the openings of a mechanically strong knitted mesh of poly(lactic-co-glycolic acid). The knitted mesh served as a skeleton reinforcing the composite web, while the web-like collagen microsponges facilitated cell seeding, cell distribution, and tissue formation. Bovine chondrocytes cultured in the composite web showed a spatially even distribution, maintained their natural morphology, and produced cartilaginous extracellular matrices such as type II collagen and aggrecan. The thickness of the implant can be simply adjusted by laminating or rolling the web sheets. Not only did the histological structure of the engineered cartilage patches match the bovine native articular cartilage, but also their dynamic complex modulus, structural stiffness, and phase lag reached 37.8, 57.0, and 86.3% of those of native bovine articular cartilage, respectively. The composite web could be an important scaffold for tissue engineering.

Aggrecans↗

PubMed2003

Redifferentiation of dedifferentiated bovine chondrocytes when cultured in vitro in a PLGA-collagen hybrid mesh.

Bovine articular chondrocytes dedifferentiated and lost their ability to express articular cartilage-specific extracellular matrices such as type II collagen and aggrecan when cultured in a culture flask during in vitro multiplication. A poly(DL-lactic-co-glycolic acid) (PLGA)-collagen hybrid mesh was prepared and used to redifferentiate the dedifferentiated cells. The two passaged dedifferentiated chondrocytes were seeded in a PLGA-collagen hybrid mesh and cultured in vitro in Dulbecco's modified Eagle's medium containing 10% fetal bovine serum. The cells adhered to the hybrid mesh, distributed evenly, and proliferated to fill the spaces in the scaffold. The gene expression of type I collagen, type II collagen, and aggrecan was analyzed after the cells were cultured in the hybrid mesh for 2-12 weeks. The expression of the gene encoding type I collagen was downregulated, whereas those of type II collagen and aggrecan were upregulated. Histological examination by hematoxylin-eosin and safranin O/fast green staining indicates that the cells regained their original round morphology. In addition, a homogeneous distribution of articular cartilage extracellular matrices was detected around the cells. These results suggest redifferentiation of the differentiated chondrocytes in the hybrid mesh. The hybrid mesh, which facilitated the redifferentiation of the dedifferentiated multiplied chondrocytes, would be an effective scaffold for the assembly of cells to regenerate three-dimensional cartilaginous tissue.

Aggrecans↗

PubMed2003

Tissue-engineered urinary bladder wall using PLGA mesh-collagen hybrid scaffolds: a comparison study of collagen sponge and gel as a scaffold.

PURPOSE: Tissue engineering of the urinary bladder using autologous cells and biodegradable scaffold is a promising method for augmentation. The authors developed 2 hybrid scaffolds by combining poly (DL-lactic-co-glycolic acid; PLGA) mesh for mechanical strength with collagen sponge or gel suitable for cell seeding. The aim of this study was to compare collagen as a scaffold between collagen sponge and gel and to construct a tissue-engineered urinary bladder wall utilizing these hybrid scaffolds. METHODS: The PLGA mesh-collagen hybrid scaffolds were prepared by introducing collagen sponge or gel into the PLGA knitted mesh. Urothelial and smooth muscle cells were obtained from porcine urinary bladder wall and were cultured in their respective media. The cells were seeded on these hybrid scaffolds. These constructs were analyzed morphologically and immunohistochemically. RESULTS: The urothelial layer was generated 3 dimensionally by culturing urothelial cells with PLGA mesh and collagen sponge. The smooth muscle layer was constructed by culturing smooth muscle cells with PLGA mesh and collagen gel. And a novel tissue-engineered urinary bladder wall was constructed laminating the urothelial and smooth muscle layers. CONCLUSIONS: Ex vivo construction of urinary bladder wall using hybrid scaffolds prepared by combining PLGA mesh with collagen sponge or gel was successful. This tissue-engineered urinary bladder wall allows easy handling and may become a promising tool for bladder augmentation.

Absorbable Implants↗

PubMed2003

Transplantation of cultured bone cells using combinations of scaffolds and culture techniques.

The transplantation of cultured bone cells is expected to become a candidate for bone regeneration therapy. For the clinical application of this therapy, there remain several problems to be overcome, for example, the improvements of scaffolds and culture techniques. In this review article, two kinds of porous ceramics, a novel sintered porous hydroxyapatite and a porous beta-tricalcium phosphate (TCP), as well as a collagen-phosphosphoryn sponge are introduced as new scaffolds for bone regeneration. The former two ceramic scaffolds proved to be applicable for bone regeneration therapy. The collagen-phosphophoryn sponge proved to have bone formation ability in vivo. Moreover, for the application of this therapy to the regeneration of large bone defects, we improved the culture method by applying a low-pressure system and a perfusion system. Both culture systems accelerated the formation of bone in vivo in this transplantation model. Combinations of the scaffolds and culture techniques might be considered when designing therapeutic strategies.

Animals↗

PubMed2003

Effects of transcutaneous topical injection of oxygen on vascular endothelial growth factor gene into the healing ligament in rats.

The effects of intermittent exposure to oxygen injection on an experimentally induced ligament tear were studied in the right hind limb of 17 male Sprague-Dawley rats. Two rats were used for monitoring the partial oxygen pressure (pO(2)) of subcutaneous tissue and 15 rats were divided into the following three groups of 5 after an experimentally induced ligament tear: Group A, control group; Group B, injection of 0.5 ml hyaluronan to the wound transcutaneously; Group C, injection of 0.5 ml hyaluronan mixed with haemoglobin and oxygen (n=5). At 7 days post-ligament injury, we compared the ligaments of the three treatment groups for gross appearance, histology and expression of vascular endothelial growth factor (VEGF) mRNA by RT-PCR. Our results indicate that the pO(2) was immediately elevated to 334.6 mmHg by topical oxygen injection and this method was effective in promoting vessel formation in comparison to the control group (p<0.01). However, the expression of VEGF mRNA in the topical oxygen injection group (Group C) was lower than that in control group (p<0.05). Our results suggest that oxygen is able to accelerate vessel formation in spite of its effect of decreasing VEGF mRNA. Our method of using topical injection proved to be useful in healing the ligament and the wound.

Administration, Cutaneous↗

PubMed2003

Application of perfusion culture system improves in vitro and in vivo osteogenesis of bone marrow-derived osteoblastic cells in porous ceramic materials.

Composites of bone marrow-derived osteoblasts (BMOs) and porous ceramics have been widely used as a bone graft model for bone tissue engineering. Perfusion culture has potential utility for many cell types in three-dimensional (3D) culture. Our hypothesis was that perfusion of medium would increase the cell viability and biosynthetic activity of BMOs in porous ceramic materials, which would be revealed by increased levels of alkaline phosphate (ALP) activity and osteocalcin (OCN) and enhanced bone formation in vivo. For testing in vitro, BMO/beta-tricalcium phosphate composites were cultured in a perfusion container (Minucells and Minutissue, Bad Abbach, Germany) with fresh medium delivered at a rate of 2 mL/h by a peristaltic pump. The ALP activity and OCN content of composites were measured at the end of 1, 2, 3, and 4 weeks of subculture. For testing in vivo, after subculturing for 2 weeks, the composites were subcutaneously implanted into syngeneic rats. These implants were harvested 4 or 8 weeks later. The samples then underwent a biochemical analysis of ALP activity and OCN content and were observed by light microscopy. The levels of ALP activity and OCN in the composites were significantly higher in the perfusion group than in the control group (p < 0.01), both in vitro and in vivo. Histomorphometric analysis of the hematoxylin- and eosin-stained sections revealed a higher average ratio of bone to pore in BMO/beta-TCP composites of the perfusion group after implantation: 47.64 +/- 6.16 for the perfusion group and 26.22 +/- 4.84 for control at 4 weeks (n = 6, p < 0.01); 67.97 +/- 3.58 for the perfusion group and 47.39 +/- 4.10 for control at 8 weeks (n = 6, p < 0.05). These results show that the application of a perfusion culture system during the subculture of BMOs in a porous ceramic scaffold is beneficial to their osteogenesis. After differentiation culture in vitro with the perfusion culture system, the activity of the osteoblastic cells and the consequent bone formation in vivo were significantly enhanced. These results suggest that the perfusion culture system is a valuable and convenient tool for applications in tissue engineering, especially in the generation of artificial bone tissue.

Alkaline Phosphatase↗

PubMed2003

Rapid and large-scale formation of chondrocyte aggregates by rotational culture.

Chondrocytes in articular cartilage synthesize collagen type II and large sulfated proteoglycans, whereas the same cells cultured in monolayer (2D) dedifferentiate into fibroblastic cells and express collagen type I and small proteoglycans. On the other hand, a pellet culture system was developed as a method for preventing the phenotypic modulation of chondrocytes and promoting the redifferentiation of dedifferentiated ones. Because the pellet culture system forms only one cell aggregate each tube by a centrifugator, the pellet could not be applied to produce a tissue-engineered cartilage. Therefore, we tried to form chondrocyte aggregates by a rotational culture, expecting to form a large number of aggregates at once. In order to increase cell-cell interactions and decrease chondrocyte-material interaction, dishes with low retention of protein adsorption and cell adhesiveness were used. In addition, rotational shaking of the dish including cells was attempted to increase the cell-cell interaction. The shaking speed was set at 80 rpm, so the cells would be distributed in the center of the dish to augment the frequency of cell-cell contact. Under these conditions, bovine articular chondrocytes started aggregating in a few hours. At 24-36 h of rotational culture, aggregates with smooth surfaces were observed. Parameters such as increase of culture time and addition of TGF-beta controlled diameters of the aggregates. There were many fusiform cells at the periphery of the aggregates, where the cells tended to form a multilayered zone in cross sections. In addition, lacune-like structure, which was almost the same as pellet culture, was observed. It was found that the internal structure of the aggregates was similar to that of pellets reported previously. Therefore, the aggregates formed by a rotational culture could become an essential component to make tissue-engineered artificial cartilage.

Animals↗

PubMed2003

Mesenchymal stem cells and bioceramics: strategies to regenerate the skeleton.

Bone is formed by cells called osteoblasts, which arise from mesenchymal stem cells (MSCs). The cells are known to exist in thin tissues surrounding bone (periosteum) and bone marrow, but the population is extremely small. The number of marrow-derived MSCs can be expanded using tissue culture techniques. These culture-expanded MSCs have the in vitro capacity to differentiate into osteoblasts. Importantly, the cultured osteoblasts can form extracellular matrix in culture. This matrix consists of fine crystals of hydroxyapatite comparable to natural bone mineral, as evidenced by X-ray diffraction and Fourier-transform infrared spectroscopy. It is possible to fabricate the osteoblasts/ bone matrix on the surface of bioceramics. Thus in vitro cultured bone can show further bone-forming capability after in vivo implantation. We have begun studying this tissue-engineering approach in patients with skeletal problems. This paper describes this and other approaches using MSCs to regenerate skeletal tissue.

Biocompatible Materials↗