Than Khin | PubMed Health

PubMed2004

Novel microbial nitrogen removal processes.

The present-day wastewater treatment practices can be significantly improved through the introduction of new microbial treatment technologies. Recently, several new processes for nitrogen removal have been developed. These new nitrogen removal technologies provide practicable options for treating nitrogen-laden wastewaters. The new processes are based on partial nitrification of ammonium to nitrite combined with anaerobic ammonium oxidation. These processes include the single reactor system for high ammonia removal over nitrite (SHARON) process, which involves part conversion of ammonium to nitrite; the anaerobic ammonium oxidation (ANAMMOX) process, which involves anaerobic ammonium oxidation; and the completely autographic nitrogen removal over nitrite (CANON) process, which involves nitrogen removal within one reactor under oxygen-limited conditions. These new processes target the removal of nitrogen from wastewaters containing significant quantities of ammonium.

Industrial Waste↗

PubMedDate not supplied

Modeling of nitrification inhibition with aniline in suspended-growth processes.

Nitrification inhibition due to aniline was investigated in completely mixed suspended-growth, batch, and continuous processes. Synthetic wastewater was used with aniline as the carbon source. The experiments were conducted at aniline concentrations inhibitory to nitrifier organisms. In the batch tests, degradation took place rapidly (within 4 to 6 hours) for initial aniline concentrations below 100 mg/L, with nitrification picking up as soon as the aniline concentration decreased to less than 3 to 4 mg/L. For initial aniline concentrations of 250 mg/L and higher, complete nitrification did not take place even though the aniline concentration decreased to less than 3 to 4 mg/L. This observation indicated nitrifier inhibition due to aniline. In the continuous experiments, a hydraulic residence time of 8 to 24 hours and a solids retention time of 8 to 24 days were maintained. Complete nitrification took place at bulk aniline concentrations less than 0.5 mg/L, while at higher aniline concentrations, nitrification inhibition took place. The inhibitory effect of aniline on the nitrification process was modeled using uncompetitive inhibition kinetics. Modeling of batch processes yielded the value for the inhibition constant for aniline, Ki, as 3.3 mg/L. Modeling of continuous processes yielded criteria for stable process operation for nitrification under inhibitory conditions, which were also confirmed through experimental results.

Aniline Compounds↗