Biomedical subjects

Thomas Gutsmann

Publications and source records attributed to Thomas Gutsmann.

At least 19 recordsLinked to original sources

PubMed2006

The mode of action of the lantibiotic lacticin 3147--a complex mechanism involving specific interaction of two peptides and the cell wall precursor lipid II.

Lacticin 3147 is a two-peptide lantibiotic produced by Lactococcus lactis in which both peptides, LtnA1 and LtnA2, interact synergistically to produce antibiotic activities in the nanomolar concentration range; the individual peptides possess marginal (LtnA1) or no activity (LtnA2). We analysed the molecular basis for the synergism and found the cell wall precursor lipid II to play a crucial role as a target molecule. Tryptophan fluorescence measurements identified LtnA1, which is structurally similar to the lantibiotic mersacidin, as the lipid II binding component. However, LtnA1 on its own was not able to substantially inhibit cell wall biosynthesis in vitro; for full inhibition, LtnA2 was necessary. Both peptides together caused rapid K(+) leakage from intact cells; in model membranes supplemented with lipid II, the formation of defined pores with a diameter of 0.6 nm was observed. We propose a mode of action model in which LtnA1 first interacts specifically with lipid II in the outer leaflet of the bacterial cytoplasmic membrane. The resulting lipid II:LtnA1 complex is then able to recruit LtnA2 which leads to a high-affinity, three-component complex and subsequently inhibition of cell wall biosynthesis combined with pore formation.

Amino Acid Sequence↗

PubMed2006

Calcium adsorption and displacement: characterization of lipid monolayers and their interaction with membrane-active peptides/proteins.

BACKGROUND: The first target of antimicrobial peptides (AMPs) is the bacterial membrane. In the case of Gram-negative bacteria this is the outer membrane (OM), the lipid composition of which is extremely asymmetric: Whereas the inner leaflet is composed of a phospholipid mixture, the outer leaflet is made up solely from lipopolysaccharides (LPSs). LPS, therefore, represents the first target of AMPs. The binding and intercalation of polycationic AMPs is driven by the number and position of negatively charged groups of the LPS. Also, proteins other than cationic AMPs can interact with LPS, e.g. leading eventually to a neutralization of the endotoxic effects of LPS. We compared different biophysical techniques to gain insight into the properties of the electrical surface potentials of lipid monolayers and aggregates composed of LPSs and various phospholipids and their interaction with peptides and proteins. RESULTS: The net negative charge calculated from the chemical structure of the phospholipid and LPS molecules is linearly correlated with the adsorption of calcium to two-dimensional lipid monolayers composed of the respective lipids. However, the zeta-potentials determined by the electrophoretic mobility of LPS aggregates can only be interpreted by assuming a dependence of the plane of shear on the number of saccharides and charged groups. Various peptides and proteins were able to displace calcium adsorbed to monolayers. CONCLUSION: To characterize the electrical properties of negatively charged phospholipids and LPSs and their electrostatic interaction with various polycationic peptides/proteins, the adsorption of calcium to and displacement from lipid monolayers is a suitable parameter. Using the calcium displacement method, the binding of peptides to monolayers can be determined even if they do not intercalate. The interpretation of zeta-potential data is difficulty for LPS aggregates, because of the complex three-dimensional structure of the LPS molecules. However, the influence of peptides/proteins on the zeta-potential can be used to characterize the underlying interaction mechanisms.

Adsorption↗

PubMed2006

Lipid-specific membrane activity of human beta-defensin-3.

Defensins represent a major component of innate host defense against bacteria, fungi, and enveloped viruses. One potent defensin found, e.g., in epithelia, is the polycationic human beta-defensin-3 (hBD3). We investigated the role of the lipid matrix composition, and in particular the presence of negatively charged lipopolysaccharides (LPS) from sensitive (Escherichia coli, Salmonella enterica serovar Minnesota) or resistant (Proteus mirabilis) Gram-negative bacteria or of the zwitterionic phospholipids of human cells, in determining the action of polycationic hBD3 on the different membranes, and related to their biological activity. The main focus was directed on data derived from electrical measurements on a reconstitution system of the OM as a planar asymmetric bilayer composed on one side of LPS and on the other of a phospholipid mixture. Our results demonstrate that the antimicrobial activity and the absence of cytotoxicity can be explained by the lipid-specificity of the peptide. A clear correlation between these aspects of the biological activity of hBD3 and its interaction with lipid matrices could be found. In particular, hBD3 could only induce lesions in those membranes resembling the lipid composition of the OM of sensitive bacterial strains. The permeation through the membrane is a decisive first step for the biological activity of many antimicrobial peptides. Therefore, we propose that the lipid-specificity of hBD3 as well as some other membrane-active antimicrobial peptides is important for their activity against bacteria or mammalian cells.

Electric Conductivity↗

PubMed2006

Mechanisms of endotoxin neutralization by synthetic cationic compounds.

A basic challenge in the treatment of septic patients in critical care units is the release of bacterial pathogenicity factors such as lipopolysaccharide (LPS, endotoxin) from the cell envelope of Gram-negative bacteria due to killing by antibiotics. LPS aggregates may interact with serum and membrane proteins such as LBP (lipopolysaccharide-binding protein) and CD14 leading to the observed strong reaction of the immune system. Thus, an effective treatment of patients infected by Gram-negative bacteria must comprise beside bacterial killing the neutralization of endotoxins. Here, data are summarized for synthetic compounds indicating the stepwise development to very effective LPS-neutralizing agents. These data include synthetic peptides, based on the endotoxin-binding domains of natural binding proteins such as lactoferrin, Limulus anti-LPS factor, NK-lysin, and cathelicidins or based on LPS sequestering polyamines. Many of these compounds could be shown to act not only in vitro, but also in vivo (e.g. in animal models of sepsis), and might be useful in future clinical trials and in sepsis therapy.

Cations↗

PubMed2005

Sacrificial bonds and hidden length: unraveling molecular mesostructures in tough materials.

Sacrificial bonds and hidden length in structural molecules and composites have been found to greatly increase the fracture toughness of biomaterials by providing a reversible, molecular-scale energy-dissipation mechanism. This mechanism relies on the energy, of order 100 eV, needed to reduce entropy and increase enthalpy as molecular segments are stretched after being released by the breaking of weak bonds, called sacrificial bonds. This energy is relatively large compared to the energy needed to break the polymer backbone, of order a few eV. In many biological cases, the breaking of sacrificial bonds has been found to be reversible, thereby additionally providing a "self-healing" property to the material. Due to the nanoscopic nature of this mechanism, single molecule force spectroscopy using an atomic force microscope has been a useful tool to investigate this mechanism. Especially when investigating natural molecular constructs, force versus distance curves quickly become very complicated. In this work we propose various types of sacrificial bonds, their combination, and how they appear in single molecule force spectroscopy measurements. We find that by close analysis of the force spectroscopy curves, additional information can be obtained about the molecules and their bonds to the native constructs.

Aggrecans↗

PubMed2005

Localization of the lipopolysaccharide-binding protein in phospholipid membranes by atomic force microscopy.

Lipopolysaccharides (LPS; endotoxin) activate immunocompetent cells of the host via a transmembrane signaling process. In this study, we investigated the function of the LPS-binding protein (LBP) in this process. The cytoplasmic membrane of the cells was mimicked by lipid liposomes adsorbed on mica, and the lateral organization of LBP in these membranes and its interaction with LPS aggregates were characterized by atomic force microscopy. Using cantilever tips functionalized with anti-LBP antibodies, single LBP molecules were localized in the membrane at low concentrations. At higher concentrations, LBP formed clusters of several molecules and caused cross-linking of lipid bilayers. The addition of LPS to LBP-containing liposomes led to the formation of LPS domains in the membranes, which could be inhibited by anti-LBP antibodies. Thus, LBP mediates the fusion of lipid membranes and LPS aggregates.

Acute-Phase Proteins↗

PubMed2005

Probing the properties of lipopolysaccharide monolayers and their interaction with the antimicrobial peptide polymyxin B by atomic force microscopy.

In contrast to the majority of all known cell types, Gram-negative bacteria have a second membrane, the outer membrane, which is an asymmetric bilayer composed of a phospholipid inner leaflet and a glycolipid outer leaflet. The glycolipid layer, in most cases being composed of a lipopolysaccharide (LPS), is the first target for antimicrobial agents. To get a basic understanding of the membrane-forming properties of LPS, we reconstituted monolayers of deep rough mutant LPS from Salmonella enterica serova Minnesota (R595 LPS), its lipid A moiety, and of the synthetic tetraacyl compound 406 (resembling the biosynthetic lipid A precursor IVa) at the air-water interface of a film balance. The liquid-expanded (LE) and liquid-condensed (LC) domains in the coexisting region were investigated with epifluorescence and, after transferring the monolayer onto mica, as a Langmuir-Blodgett film, with atomic force microscopy (AFM). The fluorescence and the AFM images showed identical domain structure. The higher resolution of the AFM images, however, contained more topographic details. Different heights and adhesion forces between the LE and LC domains could be observed. Differences in the adhesion forces between the AFM tip and the sample were determined in the repulsive and the attractive dynamic scanning modes, demonstrating the importance of a careful interpretation of height images. We propose that an increase in the lateral pressure causing the LE-LC transition of the monolayers leads to a reorientation of the molecules due to a tilt angle between the alkyl chains and the diglucosamine backbone. LPS monolayers have been utilized as a simplified reconstitution model of the outer membrane to study the interaction with antimicrobial agents. We investigated the action of the polycationic peptide polymyxin B (PMB) and found dramatic influences on the domain structures.

Anti-Bacterial Agents↗

PubMed2005

Cell membrane array fabrication and assay technology.

BACKGROUND: Microarray technology has been used extensively over the past 10 years for assessing gene expression, and has facilitated precise genetic profiling of everything from tumors to small molecule drugs. By contrast, arraying cell membranes in a manner which preserves their ability to mediate biochemical processes has been considerably more difficult. RESULTS: In this article, we describe a novel technology for generating cell membrane microarrays for performing high throughput biology. Our robotically-arrayed supported membranes are physiologically fluid, a critical property which differentiates this technology from other previous membrane systems and makes it useful for studying cellular processes on an industrialized scale. Membrane array elements consist of a solid substrate, above which resides a fluid supported lipid bilayer containing biologically-active molecules of interest. Incorporation of transmembrane proteins into the arrayed membranes enables the study of ligand/receptor binding, as well as interactions with live intact cells. The fluidity of these molecules in the planar lipid bilayer facilitates dimerization and other higher order interactions necessary for biological signaling events. In order to demonstrate the utility of our fluid membrane array technology to ligand/receptor studies, we investigated the multivalent binding of the cholera toxin B-subunit (CTB) to the membrane ganglioside GM1. We have also displayed a number of bona fide drug targets, including bacterial endotoxin (also referred to as lipopolysaccharide (LPS)) and membrane proteins important in T cell activation. CONCLUSION: We have demonstrated the applicability of our fluid cell membrane array technology to both academic research applications and industrial drug discovery. Our technology facilitates the study of ligand/receptor interactions and cell-cell signaling, providing rich qualitative and quantitative information.

Animals↗

PubMed2005

Sacrificial bonds in polymer brushes from rat tail tendon functioning as nanoscale velcro.

Polymers play an important role in many biological systems, so a fundamental understanding of their cross-links is crucial not only for the development of medicines but also for the development of biomimetic materials. The biomechanical movements of all mammals are aided by tendon fibrils. The self-organization and biomechanical functions of tendon fibrils are determined by the properties of the cross-links between their individual molecules and the interactions among the cross-links. The cross-links of collagen and proteoglycan molecules are particularly important in tendons and, perhaps, bone. To probe cross-links between tendon molecules, we used the cantilever tip of an atomic force microscope in a pulling setup. Applying higher forces to rat tail tendon molecules with the tip led to a local disruption of the highly organized shell of tendon fibrils and to the formation or an increase of a polymer brush of molecules sticking out of the surface. The cross-linking between these molecules was influenced by divalent Ca2+ ions. Furthermore, the molecules of the polymer brush seemed to bind back to the fibrils in several minutes. We propose that sacrificial bonds significantly influence the tendon fibrils' self-organization and self-healing and therefore contribute to toughness and strength.

Animals↗

PubMed2005

Lipid-mediated resistance of Gram-negative bacteria against various pore-forming antimicrobial peptides.

Lipopolysaccharides (LPSs) play a dual role as target and as effector molecules. The knowledge of the LPS-induced activation of human immune cells is increasing; however, surprisingly, much less effort seems to be directed towards the understanding of the mechanisms leading to the killing of the bacterial organisms, which eventually results in the release of LPS from the bacterial surface into the blood circulation. We demonstrate mechanisms of interaction of peptides of the innate immune system (e.g. defensins and cathelicidins) as well as of externally administered antibiotics (e.g. Polymyxin B) with Gram-negative bacteria. The main focus is directed on data derived from electrical measurements on a reconstitution system of the outer membrane as an asymmetric bilayer composed on one side of LPS and on the other of phospholipids. All these antimicrobial peptides (AMPs) are membrane-active and induce the permeabilization of the reconstituted membranes by the formation of lesions. We found that differences in the activity of the AMPs against various sensitive and resistant Gram-negative bacteria can be explained solely by variations in the chemical structure of LPS, e.g. in the composition of the sugar head group. A reduction of the net negative charge of LPS is responsible for a reduced interaction with the polycationic AMPs and thus for resistance. A most important side effect of positively charged AMPs is the neutralization of the negatively charged LPS released from the bacterial surface as a consequence of AMP-induced killing.

Anti-Bacterial Agents↗

PubMed2004

Correlation of AFM and SFA measurements concerning the stability of supported lipid bilayers.

Phospholipid bilayers were studied by means of atomic force microscopy (AFM) and a surface force apparatus (SFA). The stability of the supported bilayers was described by the amount of irregularities in the topography of the membrane by means of AFM and by the occurrence of hemifusion in the SFA, which is an indicator of defective bilayers. The bilayers, composed of lipids having the same headgroup but different chain lengths in the two leaflets, were prepared by Langmuir-Blodgett deposition and transferred at different surface pressures. The topography of the supported bilayers in aqueous solution, as imaged by AFM, revealed an increasing number of defects in the supported lipid membranes with decreased deposition pressure of the outer lipid layer. These defects, which appeared in the form of monolayer and bilayer (self-assembled) thick holes within the membrane, were energetically favorable over an evenly depleted bilayer. We found that the quantity of these defects (holes of </=0.5 micro m diameter and covering up to 30% of the surface area) correlated well with the stability of the bilayers as measured by SFA, a truly complementary instrument.

Elasticity↗

PubMed2004

Inner field compensation as a tool for the characterization of asymmetric membranes and Peptide-membrane interactions.

Symmetric and asymmetric planar lipid bilayers prepared according to the Montal-Mueller method are a powerful tool to characterize peptide-membrane interactions. Several electrical properties of lipid bilayers such as membrane current, membrane capacitance, and the inner membrane potential differences and their changes can be deduced. The time-resolved determination of peptide-induced changes in membrane capacitance and inner membrane potential difference are of high importance for the characterization of peptide-membrane interactions. Intercalation and accumulation of peptides lead to changes in membrane capacitance, and membrane interaction of charged peptides induces changes in the charge distribution within the membrane and with that to changes in the membrane potential profile. In this study, we establish time-resolved measurements of the capacitance minimization potential DeltaPsi on various asymmetric planar lipid bilayers using the inner field compensation method. The results are compared to the respective ones of inner membrane potential differences DeltaPhi determined from ion carrier transport measurements. Finally, the time courses of membrane capacitances and of DeltaPsi have been used to characterize the interaction of cathelicidins with reconstituted lipid matrices of various Gram-negative bacteria.

Antimicrobial Cationic Peptides↗

PubMed2004

Force spectroscopy of collagen fibers to investigate their mechanical properties and structural organization.

Tendons are composed of collagen and other molecules in a highly organized hierarchical assembly, leading to extraordinary mechanical properties. To probe the cross-links on the lower level of organization, we used a cantilever to pull substructures out of the assembly. Advanced force probe technology, using small cantilevers (length <20 microm), improved the force resolution into the sub-10 pN range. In the force versus extension curves, we found an exponential increase in force and two different periodic rupture events, one with strong bonds (jumps in force of several hundred pN) with a periodicity of 78 nm and one with weak bonds (jumps in force of <7 pN) with a periodicity of 22 nm. We demonstrate a good correlation between the measured mechanical behavior of collagen fibers and their appearance in the micrographs taken with the atomic force microscope.

Animals↗

PubMed2003

Interaction of amoebapores and NK-lysin with symmetric phospholipid and asymmetric lipopolysaccharide/phospholipid bilayers.

Amoebapores from protozoan parasite Entamoeba histolytica and NK-lysin of porcine cytotoxic lymphocytes belong to the same family of saposin-like proteins. In addition to the structural similarity, amoebapores and NK-lysin are both highly effective against prokaryotic and eukaryotic target cells in that they permeabilize the target cell membranes. Here, we have investigated in detail the protein/lipid interaction for the three isoforms of amoebapore and NK-lysin. Results obtained from electrical measurements on planar bilayer membranes, including reconstitution models of the lipid matrix of the outer membrane of Escherichia coli and phospholipid membranes, fluorescence energy transfer spectroscopy with liposomes, and monolayer measurements on a Langmuir trough, provided information on lipid preferences, pH dependences, and membrane interaction mechanisms. The three amoebapores led to the formation of transient pores with similar characteristics in conductance, sublevels, and lifetime for the different isoforms. The conductance of the pores was dependent on the polarity of the applied clamp voltage, and the distribution of the sublevels was affected by the value of the clamp voltage. The size of the pores and distribution of conductance sublevels differed between symmetric phospholipid and asymmetric lipopolysaccharide/phospholipid bilayers. Notably, NK-lysin caused the formation of well-defined pores, which were lipid- and voltage-dependent, and their characteristics differed from those induced by amoebapores; e.g., the protein concentration necessary to induce pore formation was 20 times higher. The biophysical data give important information on the mode of action of these small effector proteins, which may further lead to a better understanding of peptide-membrane interactions in general.

Animals↗

PubMed2003

Investigations into the polymorphism of rat tail tendon fibrils using atomic force microscopy.

Collagen type I displays a typical banding periodicity of 67 nm when visualized by atomic force or transmission electron microscopy imaging. We have investigated collagen fibers extracted from rat tail tendons using atomic force microscopy, under different ionic and pH conditions. The majority of the fibers reproduce the typical wavy structure with 67 nm spacing and a height difference between the peak and the grooves of at least 5 nm. However, we were also able to individuate two other banding patterns with 23+/-2 nm and 210+/-15 nm periodicities. The small pattern showed height differences of about 2 nm, whereas the large pattern seems to be a superposition of the 67 nm periodicity showing height differences of about 20 nm. Furthermore, we could show that at pH values of 3 and below the fibril structure gets dissolved whereas high concentrations of NaCl and CaCl(2) could prevent this effect.

Animals↗

PubMed2003

Evidence that collagen fibrils in tendons are inhomogeneously structured in a tubelike manner.

The standard model for the structure of collagen in tendon is an ascending hierarchy of bundling. Collagen triple helices bundle into microfibrils, microfibrils bundle into subfibrils, and subfibrils bundle into fibrils, the basic structural unit of tendon. This model, developed primarily on the basis of x-ray diffraction results, is necessarily vague about the cross-sectional organization of fibrils and has led to the widespread assumption of laterally homogeneous closepacking. This assumption is inconsistent with data presented here. Using atomic force microscopy and micromanipulation, we observe how collagen fibrils from tendons behave mechanically as tubes. We conclude that the collagen fibril is an inhomogeneous structure composed of a relatively hard shell and a softer, less dense core.

Animals↗

PubMed2003

Towards antibacterial strategies: studies on the mechanisms of interaction between antibacterial peptides and model membranes.

Lipopolysaccharides (LPSs) play a dual role as inflammation-inducing and as membrane-forming molecules. The former role attracts significantly more attention from scientists, possibly because it is more closely related to sepsis and septic shock. This review aims to focus the reader's attention to the other role, the function of LPS as the major constituent of the outer layer of the outer membrane of Gram-negative bacteria, in particular those of enterobacterial strains. In this function, LPS is a necessary component of the cell envelope and guarantees survival of the bacterial organism. At the same time, it represents the first target for attacking molecules which may either be synthesized by the host's innate or adaptive immune system or administered to the human body. The interaction of these molecules with the outer membrane may not only directly cause the death of the bacterial organism, but may also lead to the release of LPS into the circulation. Here, we review membrane model systems and their application for the study of molecular mechanisms of interaction of peptides such as those of the human complement system, the bactericidal/permeability-increasing protein (BPI), cationic antibacterial peptide 18 kDa (CAP18) as an example of cathelicidins, defensins, and polymyxin B (PMB). Emphasis is on electrical measurements with a reconstitution system of the lipid matrix of the outer membrane which was established in the authors' laboratory as a planar asymmetric bilayer with one leaflet being composed solely of LPS and the other of the natural phospholipid mixture. The main conclusion, which can be drawn from these investigations, is that LPS and in general its negative charges are the dominant determinants for specific peptide-membrane interactions. However, the detailed mechanisms of interaction, which finally lead to bacterial killing, may involve further steps and differ for different antibacterial peptides.

Animals↗

PubMed2002

Pore formation and function of phosphoporin PhoE of Escherichia coli are determined by the core sugar moiety of lipopolysaccharide.

The lipid matrix of the outer membrane of Gram-negative bacteria is an asymmetric bilayer composed of a phospholipid inner leaflet and a lipopolysaccharide outer leaflet. Incorporated into this lipid matrix are, among other macromolecules, the porins, which have a sieve-like function for the transport or exclusion of hydrophilic substances. It is known that a reduced amount of porins is found in the outer membrane of rough mutants as compared with wild-type bacteria. This observation was discussed to be caused by a reduced number of insertion sites in the former. We performed electrical measurements on reconstituted planar bilayers composed of lipopolysaccharide on one side and a phospholipid mixture on the other side using lipopolysaccharide from various rough mutant strains of Salmonella enterica serovar Minnesota. We found that pore formation by PhoE trimers that were added to the phospholipid side of the bilayers increased with the increasing length of the lipopolysaccharide core sugar moiety. These results allow us to conclude that the length of the sugar moiety of lipopolysaccharide is the parameter governing pore formation and that no particular insertion sites are required. Furthermore, we found that the voltage gating of the porin channels is strongly dependent on the composition of the lipid matrix.

Escherichia coli Proteins↗