PubMed Health⌕ Search

Biomedical subjects

Thomas Heinze

Publications and source records attributed to Thomas Heinze.

8 recordsLinked to original sources

Nanoparticles on the basis of highly functionalized dextrans.

New nanoparticles based on well-defined dextran esters were prepared by a dialysis process. Dextran was converted into a propionate with a degree of substitution of 1.70 and, subsequently, acylated under homogeneous reaction conditions with a pyroglutamic acid imidazolide, which is prepared in situ by conversion of pyroglutamic acid with N,N-carbonyldiimidazole. The synthesis path allows perfect control of the amphiphilicity and solubility. The highly functionalized polysaccharide derivative avoids the collapse of the nanostructure due to the prevention of hydrogen bond formation. The major fraction of the dextran propionate pyroglutamate nanoparticles investigated by SEM and AFM exhibits narrow size distribution with 370 nm as mean diameter and uniform spherical shape. The SEM image verifies that polymeric nanoparticles in the suspensions did not undergo any morphological changes within 3 weeks.

Dextrans↗

Ionic liquids as reaction medium in cellulose functionalization.

The application of different ionic liquids (IL), namely 1-N-butyl-3-methylimidazolium chloride ([C(4)mim](+)Cl(-)), 3-methyl-N-butyl-pyridinium chloride and benzyldimethyl(tetradecyl)ammonium chloride were investigated as solvents for cellulose. The ILs used have the ability to dissolve cellulose with a degree of polymerization in the range from 290 to 1 200 to a very high concentration. Using [C(4)mim](+)Cl(-), no degradation of the polymer appears. By (13)C NMR measurement it was confirmed that this IL is a so-called non-derivatizing solvent. [C(4)mim](+)Cl(-) can be applied as a reaction medium for the synthesis of carboxymethyl cellulose and cellulose acetate. Without using any catalyst, cellulose derivatives with high degree of substitution could be prepared.(13)C NMR spectrum of cellulose dissolved in the IL [C(4)mim](+)Cl(-) (top). The (13)C NMR spectrum of cellulose dissolved in DMSO/tetrabutylammonium fluoride trihydrate is shown for comparison (bottom).

Acetylation↗

Studies on the synthesis of 2,3-o-hydroxyalkyl ethers of cellulose.

Novel 2,3-O-hydroxyethyl- and 2,3-O-hydroxypropyl cellulose products were synthesized by heterogeneous etherification of 6-O-(4-monomethoxytrityl) cellulose (MMTC). Due to the very hydrophobic character of MMTC, the reaction was successful in the presence of anionic and non-ionic detergent in the reaction mixture yielding the 2,3-O-cellulose ethers with a molar degree of substitution (MS) varying between 0.25 and 2.00 after detritylation. The products were characterized by means of (1)H and (13)C NMR spectroscopy including two-dimensional methods. The 2,3-O-hydroxypropyl cellulose samples are soluble in water at a MS as low as 0.8. The spectroscopic studies showed that the unusual solubility results from a preferred substitution of hydroxy groups of the anhydroglucose unit while the newly formed hydroxy moieties are included in the reaction to a minor extent only. In contrast, conventionally synthesized hydroxypropyl cellulose is soluble in water starting at a MS of about 4.0 because of the formation of oxyethylene side chains. (13)C DEPT 135 NMR spectrum of 2,3-O-hydroxypropyl cellulose.

Biocompatible Materials↗

Studies on the homogeneous acetylation of cellulose in the novel solvent dimethyl sulfoxide/tetrabutylammonium fluoride trihydrate.

The novel solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride trihydrate (TBAF . 3H(2)O) was studied for acetylation of linters cellulose. In order to control the degree of substitution (DS), acetylation of the macromolecule was carried out at different reaction time and temperature, molar ratio of reactants, as well as under variation of the concentration of TBAF . 3H(2)O in solution. Cellulose acetate (CA) was accessible with DS ranging from 0.43 to 2.77. The change in concentration of TBAF . 3H(2)O in DMSO showed a strong influence on DS. The most appropriate reaction conditions for acetylation of linters cellulose regarding maximal DS were evaluated. The structure of the CA was characterized by means of FTIR and NMR spectroscopy. The solubility of the CA depends not only on the DS but also on the reaction conditions applied, indicating a different distribution of acetate moieties both within and between polymer chains.

Acetylation↗

Bioactive polysaccharides from the stems of the Thai medicinal plant Acanthus ebracteatus: their chemical and physical features.

Crude water-soluble polysaccharides were isolated from Acanthus ebracteatus by hot water extraction followed by ethanol precipitation after pre-treatment with 80% ethanol. The crude polysaccharides were separated into neutral and acidic polysaccharides by anion-exchange chromatography. The neutral polysaccharide (A1001) was rich in galactose, 3-O-methylgalactose and arabinose, whereas the acidic polysaccharide (A1002) consisted mainly of galacturonic acid along with rhamnose, arabinose and galactose as minor components indicating a pectin-type polysaccharide with rhamnogalacturonan type I (RG-1) backbone. 3-O-Methylgalactose is also present in the acidic fraction. Both neutral and acidic fractions showed potent effects on the complement system using pectic polysaccharide PM II from Plantago major as a positive control. A small amount of 3-O-methylgalactose present in the pectin seemed to be of importance for activity enhancement in addition to the amount of neutral sugar side chains attached to RG-1. The relationship between chemical structure and effect on the complement system of the isolated polysaccharides is considered in the light of these data. The presence of the rare monosaccharide 3-O-methylgalactose may indicate that this can be used as a chemotaxonomic marker. The traditional way of using this plant as a medical remedy appears to have a scientific basis.

Acanthaceae↗

Surface modification of cellulose fibers: towards wood composites by biomimetics.

A biomimetic approach was taken for studying the adsorption of a model copolymer (pullulan abietate, DS 0.027), representing the lignin-carbohydrate complex, to a model surface for cellulose fibers (Langmuir-Blodgett thin films of regenerated cellulose). Adsorption results were assayed using surface plasmon resonance spectroscopy (SPR) and atomic force microscopy (AFM). Rapid, spontaneous, and desorption-resistant surface modification resulted. This effort is viewed as a critical first step towards the permanent surface modification of cellulose fibers with a layer of molecules amenable to either enzymatic crosslinking for improved wood composites or thermoplastic consolidation.

Biomimetics↗

Tailored cellulose esters: synthesis and structure determination.

A broad variety of cellulose esters with complex and sensitive (against hydrolysis and light) structures was synthesized homogeneously in N,N-dimethylacetamide (DMAc)/LiCl and in the new solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride (TBAF) via in situ activation of the carboxylic acids with N,N'-carbonyldiimidazole (CDI). New esters of chiral (-)-menthyloxyacetic acid, of unsaturated 3-(2-furyl)-acrylcarboxylic- and furane-2-carboxylic acid, acids with crownether moieties (4'-carboxybenzo-18-crown-6), and with carboxymethyl-beta-cyclodextrin were accessible in a one-pot reaction. Because of the mild conditions and the efficiency of the reaction via imidazolides, very pure and highly functionalized cellulose derivatives were obtained up to a degree of substitution of 2.5 possessing a degree of polymerization in the range of the starting cellulose. Structure determination was carried out by different one- and two-dimensional NMR techniques confirming the high purity of the esters and a pronounced regioselectivity for the primary OH function. The structural features, the purity, the solubility, and the film forming properties, make these materials desired products for the preparation of membranes with tailored separation characteristics.

Cellulose↗

Preoperative determination of CASA (Cancer Associated Serum Antigen) and CA-125 for the discrimination between benign and malignant pelvic tumor mass: a prospective study.

BACKGROUND: CA-125 is the most important tumor marker in epithelial ovarian cancer. Due to its low specificity, a combination with CASA may improve the clinical discrimination between benign and malignant adnexal masses. MATERIALS AND METHODS: In a prospective study CA-125 and CASA were analyzed in blood specimens of 153 patients, including 29 ovarian cancer. RESULTS: The median levels of both markers were significantly higher in ovarian cancer than in benign diseases. The sensitivity of CA-125 was 90%, while the specificity was 79%. PPV and NPV were 50% and 97%. In comparison, the sensitivity of CASA was lower (38%), while the specificity was slightly higher (86%). PPV and NPV were 39% and 86%. When both markers were used together, the specificity could be increased to 96% but the sensitivity remained at only 38%. The PPV and NPV was 69% and 87%. CONCLUSION: The combination of CA-125 and CASA can improve the detection of patients with suspected ovarian cancer.

Adolescent↗