Biomedical subjects

Tibor Nagy

Publications and source records attributed to Tibor Nagy.

10 recordsLinked to original sources

PubMed2005

Practical method for choosing diluent that ensures the best temperature uniformity in the case of pharmaceutical microwave vacuum drying of a heat sensitive product.

Microwave vacuum drying is getting more and more popular thanks to its known advantageous and unique features, but its non-uniform electric field can cause nonhomogeneous temperature distribution in the workload. The origin and effect of a generated hot-spot is influenced by the electromagnetic and thermodynamic features of the microwave system and the workload. In the case of single/one pot technology, the geometry and the construction of the microwave cavity is primarily designed for high-shear granulation. As for the workload, its composition has first-order effect on the electric field pattern. The aim of our study is to present a rational decision procedure based on basic practical experiments and the elaborated '3D layered thermography' technique to make it possible to choose the most suitable diluent to formulate a heat sensitive active pharmaceutical ingredient given its stability due to temperature distribution within the workload. Comparing two commonly used diluents, namely microcrystalline cellulose and corn starch, it was found that in the case of different actives with different acceptable temperature limits different diluents are recommended. Drying of a composition consists of an active ingredient characterized by a temperature limit of 70 degrees C. Using corn starch is safer when the workload is less endangered than when using microcrystalline cellulose. Above this temperature limit microcrystalline cellulose becomes beneficial.

Cellulose↗

PubMed2005

[Monitoring the temperature distribution during dielectric drying].

Microwave assisted vacuum drying offers never questioned advantageous and it is getting more and more popular lately. In spite of its uniqueness there is a rightful resistance and mistrust because the temperature distribution of the workload is far from being homogeneous as a result of the existing inhomogeneous electromagnetic field. The aim of this study is to survey the heat thus field distribution in the workload to prevent local overheating that endangers the quality of the pharmaceutical product. Thermography as a non perturbing thermometrical method was used to map the heat distribution in the workload. To get a 3D information Teflon layers were used to form cross-sectional and photogenic surfaces about the dusty blend and a purpose-developed software to evaluate qualitatively the IR pictures.

Electricity↗

PubMed2003

The mechanisms by which family 10 glycoside hydrolases bind decorated substrates.

Endo-beta-1,4-xylanases (xylanases), which cleave beta-1,4 glycosidic bonds in the xylan backbone, are important components of the repertoire of enzymes that catalyze plant cell wall degradation. The mechanism by which these enzymes are able to hydrolyze a range of decorated xylans remains unclear. Here we reveal the three-dimensional structure, determined by x-ray crystallography, and the catalytic properties of the Cellvibrio mixtus enzyme Xyn10B (CmXyn10B), the most active GH10 xylanase described to date. The crystal structure of the enzyme in complex with xylopentaose reveals that at the +1 subsite the xylose moiety is sandwiched between hydrophobic residues, which is likely to mediate tighter binding than in other GH10 xylanases. The crystal structure of the xylanase in complex with a range of decorated xylooligosaccharides reveals how this enzyme is able to hydrolyze substituted xylan. Solvent exposure of the O-2 groups of xylose at the +4, +3, +1, and -3 subsites may allow accommodation of the alpha-1,2-linked 4-O-methyl-d-glucuronic acid side chain in glucuronoxylan at these locations. Furthermore, the uronic acid makes hydrogen bonds and hydrophobic interactions with the enzyme at the +1 subsite, indicating that the sugar decorations in glucuronoxylan are targeted to this proximal aglycone binding site. Accommodation of 3'-linked l-arabinofuranoside decorations is observed in the -2 subsite and could, most likely, be tolerated when bound to xylosides in -3 and +4. A notable feature of the binding mode of decorated substrates is the way in which the subsite specificities are tailored both to prevent the formation of "dead-end" reaction products and to facilitate synergy with the xylan degradation-accessory enzymes such as alpha-glucuronidase. The data described in this report and in the accompanying paper indicate that the complementarity in the binding of decorated substrates between the glycone and aglycone regions appears to be a conserved feature of GH10 xylanases.

Bacterial Proteins↗

PubMed2003

Cellulosome assembly revealed by the crystal structure of the cohesin-dockerin complex.

The utilization of organized supramolecular assemblies to exploit the synergistic interactions afforded by close proximity, both for enzymatic synthesis and for the degradation of recalcitrant substrates, is an emerging theme in cellular biology. Anaerobic bacteria harness a multiprotein complex, termed the "cellulosome," for efficient degradation of the plant cell wall. This megadalton catalytic machine organizes an enzymatic consortium on a multifaceted molecular scaffold whose "cohesin" domains interact with corresponding "dockerin" domains of the enzymes. Here we report the structure of the cohesin-dockerin complex from Clostridium thermocellum at 2.2-A resolution. The data show that the beta-sheet cohesin domain interacts predominantly with one of the helices of the dockerin. Whereas the structure of the cohesin remains essentially unchanged, the loop-helix-helix-loop-helix motif of the dockerin undergoes conformational change and ordering compared with its solution structure, although the classical 12-residue EF-hand coordination to two calcium ions is maintained. Significantly, internal sequence duplication within the dockerin is manifested in near-perfect internal twofold symmetry, suggesting that both "halves" of the dockerin may interact with cohesins in a similar manner, thus providing a higher level of structure to the cellulosome and possibly explaining the presence of "polycellulosomes." The structure provides an explanation for the lack of cross-species recognition between cohesin-dockerin pairs and thus provides a blueprint for the rational design, construction, and exploitation of these catalytic assemblies.

Amino Acid Sequence↗

PubMed2003

The alpha-glucuronidase, GlcA67A, of Cellvibrio japonicus utilizes the carboxylate and methyl groups of aldobiouronic acid as important substrate recognition determinants.

alpha-Glucuronidases are key components of the ensemble of enzymes that degrade the plant cell wall. They hydrolyze the alpha1,2-glycosidic bond between 4-O-methyl-d-glucuronic acid (4-O-MeGlcA) and the xylan or xylooligosaccharide backbone. Here we report the crystal structure of an inactive mutant (E292A) of the alpha-glucuronidase, GlcA67A, from Cellvibrio japonicus in complex with its substrate. The data show that the 4-O-methyl group of the substrate is accommodated within a hydrophobic sheath flanked by Val-210 and Trp-160, whereas the carboxylate moiety is located within a positively charged region of the substrate-binding pocket. The carboxylate side chains of Glu-393 and Asp-365, on the "beta-face" of 4-O-MeGlcA, form hydrogen bonds with a water molecule that is perfectly positioned to mount a nucleophilic attack at the anomeric carbon of the target glycosidic bond, providing further support for the view that, singly or together, these amino acids function as the catalytic base. The capacity of reaction products and product analogues to inhibit GlcA67A shows that the 4-O-methyl group, the carboxylate, and the xylose sugar of aldobiouronic acid all play an important role in substrate binding. Site-directed mutagenesis informed by the crystal structure of enzyme-ligand complexes was used to probe the importance of highly conserved residues at the active site of GlcA67A. The biochemical properties of K288A, R325A, and K360A show that a constellation of three basic amino acids (Lys-288, Arg-325, and Lys-360) plays a critical role in binding the carboxylate moiety of 4-O-MeGlcA. Disruption of the apolar nature of the pocket created by Val-210 (V210N and V210S) has a detrimental effect on substrate binding, although the reduction in affinity is not reflected by an inability to accommodate the 4-O-methyl group. Replacing the two tryptophan residues that stack against the sugar rings of the substrate with alanine (W160A and W543A) greatly reduced activity.

Amino Acid Sequence↗

PubMed2003

[Benefit of microwaves in case of heat-sensitive agglomerate drying].

The microwave assisted vacuum drying of heat-sensitive materials is increasing in the pharmaceutical industry since the eighties. This paper deals with results of two experiment series obtained on a laboratory scale single pot dryer (Collette Ultima 251). Firstly water was heated up to the boiling point exclusively by predetermined microwave energy and then by various wall temperatures in order to determine the convection efficiency of the system. The experiments were carried out at fixed pressure level (80 mbar) and with optimum bowl load (15 kg). According to the demonstrated idea each single pot system efficiency can be specified at any type and quantity of load. With the help of the presented results the second experiments were designed to compare the microwave and convection efficiency of the single pot system during granule drying. A placebo granule was dried either by an exclusive convection or microwave method up to the determined LOD (< 0.5%). According to the tests extreme high wall temperature (85 degrees C) had to be used to achieve the same drying time--and efficiency--as with the usage of dielectric heating. Based on the results it can be stated that the shorter drying time under favourable conditions is the advantage of microwave radiation over the conventional technique.

Drug Industry↗

PubMed2002

Binding sites of different geometries for the 16-3 phage repressor.

Prokaryotic repressor-operator systems provide exemplars for the sequence-specific interactions between DNA and protein. The crucial atomic contacts of the two macromolecules are attained in a compact, geometrically defined structure of the DNA-protein complex. The pitch of the DNA interface seems an especially sensitive part of this architecture because changes in its length introduce new spacing and rotational relations in one step. We discovered a natural system that may serve as a model for investigating this problem: the repressor of the 16-3 phage of Rhizobium meliloti (helix-turn-helix class protein) possesses inherent ability to accommodate to various DNA twistings. It binds the cognate operators, which are 5'-ACAA-4 bp-TTGT-3' (O(L)) and 5'-ACAA-6 bp-TTGT-3' (O(R)) and thus differ 2 bp in length, and consequently the two half-sites will be rotated with respect to each other by 72 degrees in the idealized B-DNA (64 degrees by dinucleotide steps calculations). Furthermore, a synthetic intermediate (DNA sequence) 5'-ACAA-5 bp-TTGT-3' (O5) also binds specifically the repressor. The natural operators and bound repressors can form higher order DNA-protein complexes and perform efficient repression, whereas the synthetic operator-repressor complex cannot do either. The natural operators are bent when complexed with the repressor, whereas the O5 operator does not show bending in electrophoretic mobility assay. Possible structures of the complexes are discussed.

Alleles↗

PubMed2002

The structural basis for catalysis and specificity of the Pseudomonas cellulosa alpha-glucuronidase, GlcA67A.

Alpha-glucuronidases, components of an ensemble of enzymes central to the recycling of photosynthetic biomass, remove the alpha-1,2 linked 4-O-methyl glucuronic acid from xylans. The structure of the alpha-glucuronidase, GlcA67A, from Pseudomonas cellulosa reveals three domains, the central of which is a (beta/alpha)(8) barrel housing the catalytic apparatus. Complexes of the enzyme with the individual reaction products, either xylobiose or glucuronic acid, and the ternary complex of both glucuronic acid and xylotriose reveal a "blind" pocket which selects for short decorated xylooligosaccharides substituted with the uronic acid at their nonreducing end, consistent with kinetic data. The catalytic center reveals a constellation of carboxylates; Glu292 is poised to provide protonic assistance to leaving group departure with Glu393 and Asp365 both appropriately positioned to provide base-catalyzed assistance for inverting nucleophilic attack by water.

Binding Sites↗

PubMed2002

Evidence for temporal regulation of the two Pseudomonas cellulosa xylanases belonging to glycoside hydrolase family 11.

Pseudomonas cellulosa is a highly efficient xylan-degrading bacterium. Genes encoding five xylanases, and several accessory enzymes, which remove the various side chains that decorate the xylan backbone, have been isolated from the pseudomonad and characterized. The xylanase genes consist of xyn10A, xyn10B, xyn10C, xyn10D, and xyn11A, which encode Xyn10A, Xyn10B, Xyn10C, Xyn10D, and Xyn11A, respectively. In this study a sixth xylanase gene, xyn11B, was isolated which encodes a 357-residue modular enzyme, designated Xyn11B, comprising a glycoside hydrolase family 11 catalytic domain appended to a C-terminal X-14 module, a homologue of which binds to xylan. Localization studies showed that the two xylanases with glycoside hydrolase family (GH) 11 catalytic modules, Xyn11A and Xyn11B, are secreted into the culture medium, whereas Xyn10C is membrane bound. xyn10C, xyn10D, xyn11A, and xyn11B were all abundantly expressed when the bacterium was cultured on xylan or beta-glucan but not on medium containing mannan, whereas glucose repressed transcription of these genes. Although all of the xylanase genes were induced by the same polysaccharides, temporal regulation of xyn11A and xyn11B was apparent on xylan-containing media. Transcription of xyn11A occurred earlier than transcription of xyn11B, which is consistent with the predicted mode of action of the encoded enzymes. Xyn11A, but not Xyn11B, exhibits xylan esterase activity, and the removal of acetate side chains is required for xylanases to hydrolyze the xylan backbone. A transposon mutant of P. cellulosa in which xyn11A and xyn11B were inactive displayed greatly reduced extracellular but normal cell-associated xylanase activity, and its growth rate on medium containing xylan was indistinguishable from wild-type P. cellulosa. Based on the data presented here, we propose a model for xylan degradation by P. cellulosa in which the GH11 enzymes convert decorated xylans into substituted xylooligosaccharides, which are then hydrolyzed to their constituent sugars by the combined action of cell-associated GH10 xylanases and side chain-cleaving enzymes.

Acetates↗

PubMed2002

The membrane-bound alpha-glucuronidase from Pseudomonas cellulosa hydrolyzes 4-O-methyl-D-glucuronoxylooligosaccharides but not 4-O-methyl-D-glucuronoxylan.

The microbial degradation of xylan is a key biological process. Hardwood 4-O-methyl-D-glucuronoxylans are extensively decorated with 4-O-methyl-D-glucuronic acid, which is cleaved from the polysaccharides by alpha-glucuronidases. In this report we describe the primary structures of the alpha-glucuronidase from Cellvibrio mixtus (C. mixtus GlcA67A) and the alpha-glucuronidase from Pseudomonas cellulosa (P. cellulosa GlcA67A) and characterize P. cellulosa GlcA67A. The primary structures of C. mixtus GlcA67A and P. cellulosa GlcA67A, which are 76% identical, exhibit similarities with alpha-glucuronidases in glycoside hydrolase family 67. The membrane-associated pseudomonad alpha-glucuronidase released 4-O-methyl-D-glucuronic acid from 4-O-methyl-D-glucuronoxylooligosaccharides but not from 4-O-methyl-D-glucuronoxylan. We propose that the role of the glucuronidase, in combination with cell-associated xylanases, is to hydrolyze decorated xylooligosaccharides, generated by extracellular hemicellulases, to xylose and 4-O-methyl-D-glucuronic acid, enabling the pseudomonad to preferentially utilize the sugars derived from these polymers.

Base Sequence↗