Biomedical subjects

Tilo Pompe

Publications and source records attributed to Tilo Pompe.

13 recordsLinked to original sources

PubMed2006

Engineered matrix coatings to modulate the adhesion of CD133+ human hematopoietic progenitor cells.

Interactions of hematopoietic progenitor cells (HPC) with their local microenvironments in the bone marrow are thought to control homing, differentiation, and self-renewal of the cells. To dissect the role of extracellular matrix (ECM) components of the niche microenvironment, a set of well-defined ECM coatings including fibronectin, heparin, heparan sulphate, hyaluronic acid, tropocollagen I, and co-fibrils of collagen I with heparin or hyaluronic acid was prepared and analysed with respect to the attachment of human CD133+ HPC in vitro. The extension of the adhesion areas of individual cells as well as the fraction of adherent cells were assessed by reflection interference contrast microscopy (RICM). Intense cell-matrix interactions were found on surfaces coated with fibronectin, heparin, heparan sulphate, and on the collagen I based co-fibrils. Insignificant adhesion was found for tropocollagen I and hyaluronic acid. The strongest adhesion of HPC was observed on fibronectin with contact areas of about 7 microm(2). Interaction of HPC with coatings consisting of heparin, heparan sulphate, and co-fibrils result in small circular shaped contact zones of 3 microm(2) pointing to another, less efficient, adhesion mechanism. Analysing the specificity of cell-matrix interaction by antibody blocking experiments suggests an integrin(alpha(5)beta(1))-specific adhesion on fibronectin, while adhesion on heparin was shown to be mediated by selectins (CD62L). Taken together, our data provide a basis for the design of advanced culture carriers supporting site-specific proliferation or differentiation of HPC.

AC133 Antigen↗

PubMed2006

Surface modification of poly(hydroxybutyrate) films to control cell-matrix adhesion.

Tailoring surface properties of degradable polymer scaffolds is key to progress in various tissue engineering strategies. Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) thin films were modified by low pressure ammonia plasma, low pressure water vapour plasma, or immersion in a sodium hydroxide solution to elaborate means to control the cell-matrix adhesion of human umbilical cord vein endothelial cells grown on these materials. Fibronectin (FN) heteroexchange and cell adhesion were correlated to the physicochemical characteristics of the modified polymer surfaces which were investigated by X-ray photoelectron spectroscopy (XPS), scanning force microscopy (SFM), electrokinetic measurements, and contact angle measurements. All treatments increased the hydrophilicity of the polymer samples, which could be accounted to newly created amine or carboxyl functionalities for ammonia plasma or water vapour plasma treatments, respectively, and ester hydrolysis for treatments with alkaline aqueous solutions. Main features of cell adhesion and FN reorganisation-evaluated after 1h and after 5 days-could be attributed to the anchorage strength of pre-coated FN layers at the polymer surface, which was, in turn found to be triggered by the type of modification applied. In line with earlier studies referring to different materials cell adhesion and matrix reorganisation were shown to be sensitively controlled through the physicochemical profile of poly(hydroxybutyrate) surfaces.

Cell Adhesion↗

PubMed2005

Functional films of maleic anhydride copolymers under physiological conditions.

Reactivity and swelling of nanometer films of alternating maleic anhydride copolymers were investigated in dependence on the kind of comonomer and molar mass of copolymer in aqueous solution at pH 7.4 and pH 3.0 in order to reveal their characteristics under physiological conditions. Fully hydrolyzed (maleic acid) chains of the copolymers with styrene, propene, and ethylene comonomers covalently bound to SiO2 substrates showed a "mushroom" swelling behavior at pH 7.4 with a layer thickness scaling of N3/5. Decreasing the environmental pH was found to induce a comonomer-dependent shrinking or collapse of the immobilized polymers due to the change in ionization. From the swelling kinetics of non-hydrolyzed chains, the time constants and characteristics of swelling and anhydride hydrolysis were determined and found to depend on the type of comonomer. The short- and long-term swelling kinetics [l approximately t and approximately ln(t)1/2] were found to be in agreement with theoretical models of polymer swelling, while at intermediate time scales enhanced swelling was observed due to hydrolysis reaction of maleic anhydride groups. The findings elucidate the variety of properties of maleic anhydride copolymer films under physiological conditions, which can advantageously be applied for biofunctionalization of different templates.

Alkenes↗

PubMed2005

Fibronectin fibril pattern displays the force balance of cell-matrix adhesion.

Formation of fibrillar patterns of fibronectin on polymer substrates with gradated physicochemical surface properties was analysed during early stages of endothelial cell adhesion. Fibronectin was pre-adsorbed onto three maleic anhydride copolymer thin films with distinct differences in the protein adsorption strength as verified by heteroexchange experiments. The evolved micrometer scale fibrillar patterns of fibronectin on the compared polymer surfaces were characterized after 50 min of cellular reorganization by an auto-correlation analysis using fluorescence microscopy data. Statistical analysis revealed a decrease of the typical spacings of the fibronectin fibrils from 2.6 to 1.8 mum with decreasing fibronectin adsorption strength to the substrate. Size and density of focal adhesions correlated with this dependence of the fibronectin fibril pattern. From these data a model was developed relating the fibronectin fibril pattern to the fibronectin-substrate adsorption strength through the cytoskeletal force regulation mechanism of the cell.

Adhesiveness↗

PubMed2005

Fibronectin displacement at polymer surfaces.

The interactions of fibronectin with thin polymer films are studied in displacement experiments using human serum albumin. Fibronectin adsorption and exchange on two different maleic anhydride copolymer surfaces differing in hydrophobicity and surface charge density have been analyzed by quartz crystal microbalance and laser scanning microscopy with respect to adsorbed amounts, viscoelastic properties, and conformation. Fibronectin is concluded to become attached onto hydrophilic surfaces as a "softer", less rigid protein layer, in contrast to the more rigid, densely packed layer on hydrophobic surfaces. As a result, the fibronectin conformation is more distorted on the hydrophobic substrates together with remarkably different displacement characteristics in dependence on the adsorbed fibronectin surface concentration and the displacing albumin solution concentration. While the displacement kinetic remains constant for the strongly interacting surface, an acceleration in fibronectin exchange is observed for the weakly interacting surface with increasing fibronectin coverage. For displaced amounts, no change is determined for the hydrophobic substrate, in contrast to the hydrophilic substrate with a decrease of fibronectin exchange with decreasing coverage leading finally to a constant nondisplaceable amount of adsorbed proteins. Furthermore, the variation of the albumin exchange concentration reveals a stronger dependence of the kinetic for the weakly interacting substrate with higher rates at higher albumin concentrations.

Journal Article↗

PubMed2004

Nanoscale features of fibronectin fibrillogenesis depend on protein-substrate interaction and cytoskeleton structure.

Cell-reorganized fibronectin layers on polymer films providing a gradation of the binding strength between protein and substrate were analyzed by combined fluorescence and scanning force microscopy. The nanoscale fibronectin patterns exhibited paired parallel fibrils with characteristic spacings of 156, 233, 304, and 373 nm. These spacings depend on the interaction of fibronectin with the substrate: at enhanced fibronectin-substrate anchorage the cells form larger stress fibers, which are assembled by alpha-actinin cross-linked pairs of actin filaments subunits at the focal adhesions. A ubiquitous repeating unit of approximately 71 nm was found within these characteristic distances. We conclude that the dimensions of the actin stress fibers reflect the binding strength of fibronectin to the polymer substrate and act--in turn--as a template for the reorganization of fibronectin into surface-bound nanofibrils with characteristic spacings. This explanation was confirmed by data showing the alpha-actinin/fibronectin colocalization.

Actinin↗

PubMed2004

Dynamic alterations of fibronectin layers on copolymer substrates with graded physicochemical characteristics.

Desorption and exchange of preadsorbed fibronectin layers in pure buffer solution and solutions of human serum albumin or fibronectin, respectively, were studied in dependence on the physicochemical characteristics of maleic acid copolymer films used as substrates. Although the preadsorbed amount of fibronectin differed only slightly, the protein was found to exhibit a significantly enhanced anchorage at the more hydrophobic polymer surface as compared to the more hydrophilic and more negatively charged polymer surface. The preadsorbed fibronectin layer was most efficiently exchanged by fibronectin (i.e., in the homodisplacement process) while pure buffer solution and human serum albumin solutions induced desorption or exchange of fibronectin to lower and similar degrees. An increase of the total adsorbed amount of protein due to additional adsorption of fibronectin or human serum albumin accompanied the partial exchange of the preadsorbed fibronectin in the displacement experiments. Evaluation of the kinetics of desorption and exchange of fibronectin at any of the substrates revealed two kinds of surface-attached protein populations--a fast desorbing species and a species with a slow desorption and exchange rate. By a multivariate regression analysis the surface characteristics of the polymer substrate were confirmed to determine the degree of protein desorption and exchange while the dynamics of the layer alteration was found to solely depend on the diffusion behavior of the proteins.

Chemical Phenomena↗

PubMed2004

Comparison of flow cytometry and laser scanning cytometry for the analysis of CD34+ hematopoietic stem cells.

BACKGROUND: Characterization of hematopoietic stem cells (HSCs) by laser scanning cytometry (LSC) was compared with conventional flow cytometry (FCM). The method was evaluated for application in the development of advanced cell culture substrates that were supposed to support the ex vivo expansion of HSC. For this purpose, adherent HSCs were grown in culture on thin polymer films coated with reconstituted collagen I fibrils and subsequently analyzed by LSC. METHODS: CD34+ HSCs were isolated from cord blood by immunomagnetic separation and cultivated on polymer films coated with reconstituted collagen I fibrils. Cell surface antigens (CD34, CD29) were stained with antibodies, and nuclei were labeled with a DNA stain (TO-PRO-3 iodide) that does not interfere with the fluorochromes of the antibodies. Fluorescence intensity of the adherent cells was measured by means of LSC. Before and after in vitro expansion for time periods of up to 7 days, suspension cells were analyzed with LSC and FCM. RESULTS: LSC-based analysis enabled reliable quantification of CD34+ cells with bright antigen expression before cell culture. At this stage, LSC and FCM data for CD34 expression at given HSC samples largely coincided. After in vitro expansion, LSC data deviated from FCM data for cells with dim CD34 antigen expression, whereas the fluorescence intensity of the CD29 antigen remained comparable. The deviation between LSC and FCM data for CD34dim was attributed to the better resolution of weak fluorescence by FCM. Based on the preceding evaluation of the method, LSC analysis could be applied to characterize HSCs cultivated on collagen I-coated polymer films without detachment of the cells from the substrate. CONCLUSIONS: LSC-based analysis allows for the automated evaluation of adherent HSCs. Although resolution of weakly expressed antigens can be achieved more precisely with FCM, the method provides a valuable tool to study interactions of HSCs with bioartificial substrates.

Antigens, CD34↗

PubMed2003

Fibronectin anchorage to polymer substrates controls the initial phase of endothelial cell adhesion.

Early stages of the adhesion of human endothelial cells onto a set of smooth polymer films were analyzed to reveal the modulation of cell-matrix interactions by the physicochemical constraints of predeposited fibronectin (FN). Hydrophobic and hydrophilic polymer substrates, consisting of poly(octadecene-alt-maleic anhydride) and poly(propene-alt-maleic anhydride) films, were coated with similar amounts of FN at conditions of either covalent or noncovalent immobilization. The well-defined substrates permit variation of the anchorage of FN at invariant topography, pliability, and molecular composition. Although all of the compared FN coatings were effective in stimulating attachment of endothelial cells, the initial formation of cell-matrix adhesions was found to be controlled by the type of interaction between predeposited FN and the underlying substrate. Covalent linkage and hydrophobic interactions of the predeposited FN with the polymer films interfered with the rapid generation of focal and fibrillar adhesions. It was demonstrated that this was caused by the fact that only weakly bound FN could become readily reorganized by the adherent cells. Upon prolonged culture periods at standard cell culture conditions, secretion and deposition of organized extracellular matrix by the attached cells was found to balance out the differences of the substrates.

Biocompatible Materials↗

PubMed2003

Quantitative analysis of immobilized proteins and protein mixtures by amino acid analysis.

Biomolecular surface engineering of materials often requires precise, versatile and efficient quantification of immobilized proteins at solid surfaces. Acidic hydrolysis of surface-bound proteins and subsequent HPLC analysis of fluorescence-derivatized amino acids were adapted and critically evaluated for that purpose. Contaminations and concentration-dependent amino acid retrieval during HPLC were found to influence the accuracy of the method. In addition to the choice of adequate conditions for hydrolysis, derivatization and chromatographic separation extensions of the data evaluation were suggested to improve the accuracy of the approach when applied to single protein systems: comparing the experimentally obtained amino acid ratio to the protein constitution enabled to identify the properly separated and detected amino acids. Those amino acids were selected for a more precise calculation of the amount of immobilized protein. To further increase the accuracy of the method, the retrieval of amino acids corresponding to protein amounts in the range between 0.5 and 4.0 microg was analyzed for a variety of proteins of interest to derive protein-specific correction factors. The evaluation of amino acid data was furthermore applied to quantify binary protein mixtures at similar settings. This method was proven useful to detect the composition of protein mixtures throughout a wide range of absolute and relative concentrations.

Amino Acids↗

PubMedDate not supplied

Maleic anhydride copolymers--a versatile platform for molecular biosurface engineering.

A platform of thin polymer coatings was introduced for the functional modulation of immobilized bioactive molecules at solid/liquid interfaces. The approach is based on covalently attached alternating maleic acid anhydride copolymers with a variety of comonomers and extended through conversion of the anhydride moieties by hydrolysis, reaction with functional amines, and other conversions of the anhydride moieties. We demonstrate that these options permit control of the physicochemical constraints for bioactive molecules immobilized at interfaces to influence important performance characteristics of biofunctionalized materials for medical devices and molecular diagnostics. Examples concern the impact of the substrate-anchorage of fibronectin on the formation of cell-matrix adhesions, the orientation of endothelial cells according to lateral anti-adhesive micropatterns using grafted poly(ethylene oxide), and the spacer-dependent activity of immobilized synthetic thrombin inhibitors.

Amines↗

PubMedDate not supplied

In vitro reconstitution of fibrillar collagen type I assemblies at reactive polymer surfaces.

The reconstitution of fibrillar collagen and its assemblies with heparin and hyaluronic acid was studied in vitro. Fibril formation kinetics were analyzed by turbidity and depletion measurements in solutions containing varied concentrations of collagen and glycosaminoglycans. Fibril-forming collagen solutions were further applied for the coating of planar substrates which had been modified with alternating maleic anhydride copolymer films before. The immobilized collagen assemblies were characterized with respect to the deposited amount of protein using ellipsometry and acidic hydrolysis/HPLC-based amino acid analysis, respectively. AFM, SEM, and cLSM were utilized to gain information on structural features and patterns formed by surface-attached fibrils depending on the initial solution concentrations of collagen. The results revealed that the addition of heparin and hyaluronic acid affected both the fibril dimensions and the meshwork characteristics of the surface-bound fibrils.

Amino Acids↗

PubMedDate not supplied

Modulated fibronectin anchorage at polymer substrates controls angiogenesis.

A set of maleic anhydride copolymer thin films exhibiting well-defined differences in hydrophobicity and reactivity was compared with respect to the capability of supporting angiogenesis of human endothelial cells grown in contact. The physicochemical surface characteristics of the polymer substrates were found to modulate the anchorage of immobilized fibronectin. This was demonstrated to determine whether endothelial cells grow as a monolayer or form capillary networks. Enhanced reorganization of predeposited fibronectin into cell-matrix adhesions and slightly elevated levels of membrane-type matrix metalloproteinase 14 (MMP-14) occurred with weakly bound fibronectin layers where angiogenesis was most obvious. The key role of fibronectin-substrate binding for angiogenesis-under otherwise constant conditions-was further confirmed by the absence of variations in the expression of angiogenesis-related integrins (alpha(v)beta(3)) and in the secretion of the metalloproteinase MMP-2. Altogether, the results of this study point at the relevance of physicochemical surface characteristics of polymer materials for the stimulation of angiogenesis.

Cell Adhesion↗