Biomedical subjects

Tim Albrecht

Publications and source records attributed to Tim Albrecht.

8 recordsLinked to original sources

PubMed2007

A density functional theory study of the electronic properties of Os(II) and Os(III) complexes immobilized on Au(111).

We present a density functional theory (DFT) study of an osmium polypyridyl complex adsorbed on Au(111). The osmium polypyridyl complex [Os(bpy)2(P0P)Cl]n+ [bpy is 2,2'-bipyridine, P0P is 4,4'-bipyridine, n = 1 for osmium(II), and n = 2 for osmium(III)] is bound to the surface through the free nitrogen of the P0P ligand. The calculations illuminate electronic properties relevant to recent comprehensive characterization of this class of osmium complexes by electrochemistry and electrochemical scanning tunneling microscopy. The optimized structures for the compounds are in close agreement with crystallographic structures reported in the literature. Oxidation of the complex has little effect on these structural features, but there is a substantial reordering of the electronic energy levels with corresponding changes in the electron density. Significantly, the highest occupied molecular orbital shifts from the metal center to the P0P ligand. The surface is modeled by a cluster of 28 gold atoms and gives a good description of the effect of immobilization on the electronic properties of the complexes. The results show that the coupling between the immobilized complex and the gold surface involves electronic polarization at the adsorbate/substrate interface rather than the formation of a covalent bond. However, the cluster is too small to fully represent bulk gold with the result that, contrary to what is experimentally observed, the DFT calculation predicts that the gold surface is more easily oxidized than the osmium(II) complex.

Algorithms↗

PubMed2006

Mechanism of electrochemical charge transport in individual transition metal complexes.

We used electrochemical scanning tunneling microscopy (STM) and spectroscopy (STS) to elucidate the mechanism of electron transport through individual pyridyl-based Os complexes. Our tunneling data obtained by two-dimensional electrochemical STS and STM imaging lead us to the conclusion that electron transport occurs by thermally activated hopping. The conductance enhancement around the redox potential of the complex, which is reminiscent of switching and transistor characterics in electronics, is reflected both in the STM imaging contrast and directly in the tunneling current. The latter shows a biphasic distance dependence, in line with a two-step electron hopping process. Under conditions where the substrate/molecule electron transfer (ET) step is dominant in determining the overall tunneling current, we determined the conductance of an individual Os complex to be 9 nS (Vbias = 0.1 V). We use theoretical approaches to connect the single-molecule conductance with electrochemical kinetics data obtained from monolayer experiments. While the latter leave some controversy regarding the degree of electronic coupling, our results suggest that electron transport occurs in the adiabatic limit of strong electronic coupling. Remarkably, and in contrast to established ET theory, the redox-mediated tunneling current remains strongly distance dependent due to the electronic coupling, even in the adiabatic limit. We exploit this feature and apply it to electrochemical single-molecule conductance data. In this way, we attempt to paint a unified picture of electrochemical charge transport at the single-molecule and monolayer levels.

Journal Article↗

PubMed2006

Scanning tunneling spectroscopy in an ionic liquid.

Molecular redox levels can be used to modulate tunneling currents through single or small numbers of molecules and induce molecular electronic device function. While most of these devices require cryogenic conditions, room temperature operation has been demonstrated by using electrochemical gating in aqueous environments. The latter have, however, serious shortcomings with a view on their relatively high volatility and narrow stability ranges in terms of potential. Here we report the first-time use of an ionic liquid, 1-butyl-3-methylimidazoliumhexafluorophosphate (BMI), as an electrochemical gate in a Scanning Tunneling Microscope (STM) configuration. Ionic liquids are known to have a very low vapor pressure, and accessible potential ranges are in principle large, up to 6 V. In a proof-of-principle experiment, we show how a heteroleptic redox-active Os bisterpyridine complex (Ossac) can be brought to exhibit both transistor and diode function in this novel environment at room temperature. This renders ionic liquids an attractive gating medium for configurations where back-gating is difficult to implement (e.g., break-junction techniques) or experimental conditions prohibit the use of aqueous or organic electrolyte media (vacuum or high temperatures). From an applied perspective, they represent a step toward solid-state molecular electronics with electrochemical gating.

Journal Article↗

PubMed2006

Voltammetry and in situ scanning tunnelling microscopy of de novo designed heme protein monolayers on Au(111)-electrode surfaces.

In the present work, we report the electrochemical characterization and in situ scanning tunnelling microscopy (STM) studies of monolayers of an artificial de novo designed heme protein MOP-C, covalently immobilized on modified Au(111) surfaces. The protein forms closely packed monolayers, which remain electroactive upon immobilization. In situ STM images show circular structures indicating that MOP-C stands upright on the surface in accordance with the molecular design. Despite the large spatial extension of MOP-C, about 5 nm in height, conditions could be found where tip/sample interaction is minimal and proteins could be imaged without detectable tip interference. The results indicate further that the structural sensitivity of (in situ) STM depends to a significant extent on associated electron transfer kinetics. In the present case, the heme group does not contribute significantly to the tunnelling current, apparently due to slow electron transfer kinetics. As a consequence, STM images of heme-containing and heme-free MOP-C did not reveal any notable differences in apparent height or physical extension. The apparent height of heme-containing MOP-C did not show any dependence on the substrate potential being varied around the redox potential of the protein. The mere presence of an accessible molecular energy level is not sufficient to result in detectable tunnelling current modulation.

Adsorption↗

PubMed2006

In situ scanning tunnelling spectroscopy of inorganic transition metal complexes.

Redox molecules with equilibrium potentials suitable for electrochemical control offer perspectives in nanoscale and single-molecule electronics. This applies to molecular but also towards higher sophistication such as transistor or diode function. Most recent nanoscale or single-molecule functional systems are, however, fraught with operational limitations such as cryogenic temperatures and ultra-high vacuum, or lack of electrochemical potential control. We report here cyclic voltammetry (CV) using single-crystal Au(111)- and Pt(111)-electrodes and electrochemical in situ scanning tunnelling microscopy (STM) of a class of Os(II)/(III)- and Co(II)/(III)-complexes, the former novel molecular electronics. The complexes are robust, with ligand groups suitable for linking the complexes to the Au(111)- and Pt(111)-surfaces via N- and S-donor atoms. The data reflect monolayer behaviour. Interfacial ET of the Os-complexes is fast, kET(0) > or = 10(6) s(-1), while the Co-complex reacts much more slowly, kET(0) approximately (1-3) x 10(3) s(-1). In STM of the Os-complexes shows a maximum in the tunnelling current/overpotential relation at constant bias voltage with up to 50-fold current rise. The peak position systematically the bias voltage and equilibrium potential, in keeping with theoretical frames for two-step electron transfer (ET) of in situ STM of redox molecules. The molecular conductivity behaves broadly similarly. The Co-complex also shows a tunnelling spectroscopic feature but much weaker than the Os-complexes. This can be ascribed much smaller interfacial ET rate constant, again caused by large intramolecular nuclear reorganization and weak electronic coupling to the substrate electrode. Overall the has mapped the properties of target molecules needed for stable electronic switching, possible importance in molecular electronics towards the single-molecule level, in room temperature condensed matter environment.

Journal Article↗

PubMed2005

Electrochemical and spectroscopic investigations of immobilized de novo designed heme proteins on metal electrodes.

On the basis of rational design principles, template-assisted four-helix-bundle proteins that include two histidines for coordinative binding of a heme were synthesized. Spectroscopic and thermodynamic characterization of the proteins in solution reveals the expected bis-histidine coordinated heme configuration. The proteins possess different binding domains on the top surfaces of the bundles to allow for electrostatic, covalent, and hydrophobic binding to metal electrodes. Electrostatic immobilization was achieved for proteins with lysine-rich binding domains (MOP-P) that adsorb to electrodes covered by self-assembled monolayers of mercaptopropionic acid, whereas cysteamine-based monolayers were employed for covalent attachment of proteins with cysteine residues in the binding domain (MOP-C). Immobilized proteins were studied by surface-enhanced resonance Raman (SERR) spectroscopy and electrochemical methods. For all proteins, immobilization causes a decrease in protein stability and a loosening of the helix packing, as reflected by a partial dissociation of a histidine ligand in the ferrous state and very low redox potentials. For the covalently attached MOP-C, the overall interfacial redox process involves the coupling of electron transfer and heme ligand dissociation, which was analyzed by time-resolved SERR spectroscopy. Electron transfer was found to be significantly slower for the mono-histidine-coordinated than for the bis-histidine-coordinated heme. For the latter, the formal heterogeneous electron-transfer rate constant of 13 s(-1) is similar to those reported for natural heme proteins with comparable electron-transfer distances, which indicates that covalently bound synthetic heme proteins provide efficient electronic communication with a metal electrode as a prerequisite for potential biotechnological applications.

Biophysics↗

PubMed2005

Transistor-like behavior of transition metal complexes.

Electron transport through semiconductor and metallic nanoscale structures, molecular monolayers, and single molecules connected to external electrodes display rectification, switch, and staircase functionality of potential importance in future miniaturization of electronic devices. Common to most reported systems is, however, ultrahigh vacuum and/or cryogenic working conditions. Here we introduce a single-molecule device concept based on a class of robust redox active transition metal (Os(II)/(III)) complexes inserted between the working electrode and tip in an electrochemical scanning tunneling microscope (in situ STM). This configuration resembles a single-molecule transistor, where the reference electrode corresponds to the gate electrode. It operates at room temperature in a condensed matter (here aqueous) environment. Amplification on-off ratios up to 50 are found when the redox level is brought into the energy window between the Fermi levels of the electrodes by the overpotential ("gate voltage"). The current-voltage characteristics for two Os(II)/(III) complexes have been characterized systematically and supported by theoretical frames based on molecular charge transport theory.

Electrochemistry↗

PubMed2003

Prototype for in situ detection of atmospheric NO3 and N2O5 via laser-induced fluorescence.

We describe a prototype designed for in situ detection of the nitrate radical (NO3) by laser-induced fluorescence (LIF) and of N2O5 by thermal dissociation followed by LIF detection of NO3. An inexpensive 36 mW continuous wave multi-mode diode laser at 662 nm is used to excite NO3 in the B2E'(0000) <-- X2A'2(0000) band. Fluorescence is collected from 700 to 750 nm. The prototype has a sensitivity to NO3 of 76 ppt for a 60 s integration with an accuracy of 8%. Although this sensitivity is adequate for studies of N205 in many environments, it is much less sensitive (about 300 times) than expected based on a comparison of previously measured photophysical properties of NO2 and NO3. This implies much stronger nonradiative coupling of electronic states in NO3 than in NO2.

Environmental Monitoring↗