PubMed Health⌕ Search

Biomedical subjects

Timothy E Patten

Publications and source records attributed to Timothy E Patten.

7 recordsLinked to original sources
PubMed2006

High-efficiency stepwise contraction and adsorption nanolithography.

A new miniaturization protocol is demonstrated using stretching and relaxation of an elastomer substrate. A designed microstructure is formed on the stretched substrate and subsequently becomes miniaturized when the substrate relaxes. More importantly, the miniaturized structures can be transferred onto a new substrate for further miniaturization or can be utilized as stamps for nanolithography of designated materials. As an example of this approach, an elastic mold was first cast from a Si mold containing periodic line arrays of 1.5-microm line width. Upon relaxation, line width is reduced to 240 nm. The new elastomer may be used as stamps for micro- and nanofabrication of materials such as proteins. The polymer surface roughness or wrinkling behavior at nanoscale is found to follow classic stability model in solid mechanics. This observation provides means to design and control the surface roughness to meet specific requirements.

Acrylic Resins↗
PubMed2006

Nanoparticle agglutination: acceleration of aggregation rates and broadening of the analyte concentration range using mixtures of various-sized nanoparticles.

SiO(2) particles of various sizes were prepared and surface modified with biotin-chain-end-functionalized poly(ethylene glycol). Dispersions of these particles were prepared, and their aggregation was induced upon the addition of avidin. The aggregate size and growth rate were monitored by DLS analysis, and SEM and TEM images of freeze-dried samples of the aggregate solutions were used to confirm the DLS data and to image the aggregate size and dimension. A linear correspondence between apparent diameter and time was observed, and both the 20 and 300 nm particles aggregated at slower rates than for the 40 nm particles. These observations were attributed to differences in the average functionality of the systems and the different initial concentrations of particles and avidin. The observed aggregation rates of binary combinations of the three particle sizes (i.e., 20 + 40 nm or 40 + 300 nm) were faster than those of the single-sized mixtures. These results were attributed to the faster flux of smaller particles toward larger particles in the mixture solutions as well as to the potentially larger number of productive collisions possible between mixtures of small particles and large particles versus only similarly sized particles. Combinations of the three sizes of particles were studied to find an empirical optimum formulation for generating large aggregates on a short time scale and over a wide range of analyte concentrations.

Journal Article↗
PubMed2006

Measuring the size dependence of Young's modulus using force modulation atomic force microscopy.

The dependence of the local Young's modulus of organic thin films on the size of the domains at the nanometer scale is systematically investigated. Using atomic force microscopy (AFM) based imaging and lithography, nanostructures with designed size, shape, and functionality are preengineered, e.g., nanostructures of octadecanethiols inlaid in decanethiol self-assembled monolayers (SAMs). These nanostructures are characterized using AFM, followed by force modulation spectroscopy and microscopy measurements. Young's modulus is then extracted from these measurements using a continuum mechanics model. The apparent Young's modulus is found to decrease nonlinearly with the decreasing size of these nanostructures. This systematic study presents conclusive evidence of the size dependence of elasticity in the nanoregime. The approach utilized may be applied to study the size-dependent behavior of various materials and other mechanical properties.

Journal Article↗
PubMed2005

Copper(I) and -(II) complexes of neutral and deprotonated N-(2,6-diisopropylphenyl)-3-[bis(2-pyridylmethyl)amino]propanamide.

As part of a study of atom-transfer radical polymerization (ATRP) catalysts, four new copper(I) and -(II) compounds of a new monoanionic, tripodal tetradentate ligand, N-(2,6-diisopropylphenyl)-3-[bis(2-pyridylmethyl)amino]propanamide (DIPMAP), were prepared. Ligand synthesis followed from the addition-elimination reaction of 2,6-diisopropylaniline with acryloyl chloride and then a Lewis acid catalyzed Michael addition of bis(2-pyridylmethyl)amine to this product. The ligand was complexed to CuCl to yield monomeric Cu(DIPMAP)Cl featuring an intramolecular hydrogen bond between the free amide hydrogen and the coordinated chloride ligand. Deprotonation of the amide hydrogen in Cu(DIPMAP)Cl using n-BuLi led to the incorporation of LiCl in the resulting product, Li2Cu2(DIPMAP)2Cl2. This complex exhibited an unusual dimeric structure, with the amine nitrogens of one ligand coordinated to a lithium ion, the amide oxygen of the same ligand bridging between the lithium ions, and the amidate nitrogen of that ligand coordinated to a CuCl unit that has a structure analogous to dihalocuprate ions. Deprotonation of Cu(DIPMAP)Cl using KOtBu yielded an alkali-metal chloride free product, Cu2(DIPMAP)2, that also exhibited a dimeric structure in which the three amine nitrogens of one ligand were coordinated to one CuI ion and the amidate nitrogen of the same ligand was coordinated to the other CuI ion. Cu2(DIPMAP)2 was effective in abstracting halogen atoms from organic halides, but in the attempted ATRP of tert-butyl acrylate, molecular weight versus conversion behavior reminiscent of a redox-initiated polymerization was observed. DIPMAP was coordinated to CuBr2 to yield [Cu(DIPMAP)Br]Br with a square-pyramidal structure. The amide hydrogen in this complex could be deprotonated using KOtBu to form complex [DIPMAP]CuBr. Spectral characterization of complex confirmed deprotonation of the ligand and that it most likely had an axially distorted trigonal-bipyramidal structure, although crystals suitable for X-ray analysis could not be obtained. Solution oxidation of Cu2(DIPMAP)2 using CBr4 yielded a product, complex, whose spectral signatures did not match those of complex. The dimeric structure of Cu2(DIPMAP)2 might be a significant contributing factor to the slow rate of deactivation observed in atom-transfer reactions using Cu2(DIPMAP)2 as the catalyst.

Journal Article↗
PubMed2005

Biomolecule detection via target mediated nanoparticle aggregation and dielectrophoretic impedance measurement.

A new biosensing system is described that is based on the aggregation of nanoparticles by a target biological molecule and dielectrophoretic impedance measurement of these aggregates. The aggregation process was verified within a microchannel via fluorescence microscopy, demonstrating that this process can be used in a real time sensor application. Positive dielectrophoresis is employed to capture the nanoparticle aggregates at the edge of thin film electrodes, where their presence is detected either by optical imaging via fluorescence microscopy or by measuring the change in electrical impedance between adjacent electrodes. The electrical detection mechanism demonstrates the potential for this method as a micro total analysis system (microTAS).

Avidin↗
PubMed2004

Identification and characterization of monoanionic tripodal tetradentate ligand complexes of copper(I) and copper(II) involved in halogen atom transfer reactions.

The copper(I) complex of bis-(2-(2-pyridyl)-ethyl)-(2-(N-p-toluenesulfonamido)-ethyl)amine (PETAEA), a monoanionic, tripodal tetradentate ligand, was prepared, characterized, and shown to be an effective catalyst for atom transfer radical polymerization (ATRP). A model atom transfer reaction of Cu(PETAEA) with 1-phenylethyl bromide and TEMPO radical trapping agent was studied. The copper(II) complex formed in this reaction was identified by comparison of its spectroscopic data with that of Cu(PETAEA)Br prepared by an independent synthesis. Kinetic and spectroscopic data indicated that the reaction mechanism involved simple atom transfer from the alkyl halide to the Cu(PETAEA) to form the Cu(PETAEA)Br, and no other intermediates were involved. The solid-state structures of the copper(I) and (II) complexes appeared to be maintained in solution, so this system is an atom transfer reaction in which all of the reactive species are identified and characterized.

Journal Article↗