PubMed Health⌕ Search

Biomedical subjects

Toshifumi Takeuchi

Publications and source records attributed to Toshifumi Takeuchi.

At least 19 recordsLinked to original sources
PubMed2007

Structure-activity relationship of a glycolipid, sulfoquinovosyl diacylglycerol, with the DNA binding activity of p53.

The in vitro relationship between the human p53 DNA binding domain (p53 DBD) and glycolipids was investigated. We isolated the glycolipid fraction from spinach (Spinacia oleracea L.) and found that the fraction inhibited the double-stranded DNA (dsDNA) binding activity of p53 DBD. Since the fraction contained mainly three glycolipids, monogalactosyl diacylglycerol (MGDG), digalactosyl diacylglycerol (DGDG) and sulfoquinovosyl diacylglycerol (SQDG), and each glycolipid was purified using silica gel column chromatography. Purified SQDG inhibited the activity, however, purified MGDG and DGDG had no influence. In this study, we demonstrated the structure-function relationship between chemically synthetic SQDG and p53 DBD. The major action is probably dependent on the fatty acid effect, although SQDG was a much stronger inhibitor than the fatty acid alone present in SQDG. The inhibitory activity of SQDG was weakened by the R248A mutant of p53 DBD, suggesting that R248 in the dsDNA binding site of p53 must be important for the inhibitory activity of SQDG. SQDG binding to p53 DBD could be reversed with a non-ionic detergent, Nonidet P-40. This is the first study of a glycolipid, SQDG, acting as a dsDNA binding inhibitor of p53, and it could be considered that a SQDG-containing thylakoid membrane in plant chloroplasts might regulate the activity of p53 for cell division, cell cycle checkpoint and tumor suppression.

Computer Simulation↗
PubMed2006

Total synthesis and stereochemistry of the antitumor antibiotic PD 113,271.

[Structure: see text] A total synthesis of PD 113,271, an antitumor fostriecin analogue isolated from Streptomyces pulveraceus, was achieved by the chiral pool approach starting with D-galactose and L-tartaric acid. The synthesis of PD 113,271 led to unambiguous assignment of the relative and absolute stereochemistry of its stereocenters.

Alkenes↗
PubMed2006

Dopamine selective molecularly imprinted polymers via post-imprinting modification.

A novel synthetic dopamine receptor bearing bidentate binding sites were prepared by covalent imprinting using a disulfide linkage which is cleaved and oxidized to a non-covalent sulfoxide recognition group. The used templates have dopamine-like structures connected to an allyl moiety via a disulfide and to a 4-vinylphenyl group via a cyclic boronic diester. After the polymerization, the ester bonds were hydrolyzed and the disulfide bond was reduced to remove the template moiety from the polymer matrix, followed by the oxidation to transform the thiol residues into sulfonic acid (post imprinted process). The imprinted polymer adsorbed dopamine selectively in aqueous solution with the two-point interaction, i.e. the formation of cyclic boronic diester and electrostatic interaction with the sulfonic acid residue.

Biomimetic Materials↗
PubMed2006

Saphenous vein graft rupture eighteen years after coronary artery bypass grafting.

Delayed saphenous vein graft (SVG) rupture following coronary artery bypass graft (CABG) is an unusual but potentially fatal complication. Herein we report a case of SVG rupture 18 years after CABG. A 75-year-old man had undergone a CABG with SVG in 1987 at another institution. In 2004 the patient developed angina and underwent re-CABG with arterial conduits in our hospital. On the preoperative cineangiogram, the SVG to the right coronary artery (RCA) was irregularly dilated, yet still providing flow to the distal RCA. In 2005 he was readmitted to our hospital for abdominal pain. Chest computed tomography revealed a huge round mass adjacent to the heart. Cineangiogram showed leakage of the contrast in the midportion of the SVG. At operation, graft rupture was evident and repaired under cardiopulmonary bypass. Although cardiac function was well maintained, after the surgery he developed ischemic colitis and died of multiple organ failure on the 17th postoperative day.

Aged↗
PubMed2006

Structural relationship of curcumin derivatives binding to the BRCT domain of human DNA polymerase lambda.

We previously reported that phenolic compounds, petasiphenol and curcumin (diferuloylmethane), were a selective inhibitor of DNA polymerase lambda (pol lambda) in vitro. The purpose of this study was to investigate the molecular structural relationship of curcumin and 13 chemically synthesized derivatives of curcumin. The inhibitory effect on pol lambda (full-length, i.e. intact pol lambda including the BRCA1 C- terminal [BRCT] domain) by some derivatives was stronger than that by curcumin, and monoacetylcurcumin (compound 13) was the strongest pol lambda inhibitor of all the compounds tested, achieving 50% inhibition at a concentration of 3.9 microm. The compound did not influence the activities of replicative pols such as alpha, delta, and epsilon. It had no effect on pol beta activity either, although the three-dimensional structure of pol beta is thought to be highly similar to that of pol lambda. Compound 13 did not inhibit the activity of the C-terminal catalytic domain of pol lambda including the pol beta-like core, in which the BRCT motif was deleted from its N-terminal region. MALDI-TOF MS analysis demonstrated that compound 13 bound selectively to the N-terminal domain of pol lambda, but did not bind to the C-terminal region. Based on these results, the pol lambda-inhibitory mechanism of compound 13 is discussed.

Amino Acid Motifs↗
PubMed2005

Monoacetylcurcumin: a new inhibitor of eukaryotic DNA polymerase lambda and a new ligand for inhibitor-affinity chromatography.

We previously reported that a phenolic compound, curcumin (diferuloylmethane), was a selective inhibitor of DNA polymerase lambda (pol lambda) in vitro [Y. Mizushina, M. Hirota, C. Murakami, T. Ishidoh, S. Kamisuki, N. Shimazaki, M. Takemura, M. Perpelescu, M. Suzuki, H. Yoshida, F. Sugawara, O. Koiwai, K. Sakaguchi, Some anti-chronic inflammatory compounds are DNA polymerase lambda-specific inhibitors, Biochem. Pharmacol. 66 (2003) 1935-1944.]. We also found that monoacetylcurcumin ([1E,4Z,6E]-7-(4''-acetoxy-3''-methoxyphenyl)-5-hydroxy-1-(4'-hydroxy-3'-methoxyphenyl)hepta-1,4,6-trien-3-on), a chemically synthesized derivative of curcumin, was a stronger pol lambda inhibitor than curcumin, achieving 50% inhibition at a concentration of 3.9microM. Monoacetylcurcumin did not influence the activities of replicative pols such as alpha, delta, and epsilon, and showed no effect even on the activity of pol beta, the three-dimensional structure of which is thought to be highly similar to that of pol lambda. The compound-induced inhibition of pol lambda activity was non-competitive with respect to both the DNA template-primer and the dNTP substrate. Monoacetylcurcumin did not inhibit the activity of the C-terminal catalytic domain of pol lambda including the pol beta-like core, in which the BRCT motif was deleted. The compound did not influence the activities of prokaryotic pols or other mammalian DNA metabolizing enzymes such as calf primase of pol alpha, calf terminal deoxynucleotidyl transferase, human telomerase, human immunodeficiency virus type-1 reverse transcriptase, T7 RNA polymerase, T4 polynucleotide kinase, and bovine deoxyribonuclease I. Therefore, we concluded that monoacetylcurcumin is a selective inhibitor of pol lambda and could be used as a chromatographic ligand to purify pol lambda. We then made a monoacetylcurcumin-conjugated column with epoxy-activated Sepharose 6B. In the column, pol lambda of full length was selectively adsorbed and eluted.

Animals↗
PubMed2005

Structural analysis of isosteviol and related compounds as DNA polymerase and DNA topoisomerase inhibitors.

Isosteviol (ent-16-ketobeyeran-19-oic acid) is a hydrolysis product of stevioside, which is a natural sweetener produced in the leaves of Stevia rebaudiana (Bertoni) Bertoni. In this report, we prepared isosteviol and related compounds from stevioside by microbial transformation and chemical conversion and assayed the inhibitory activities toward DNA metabolic enzymes and human cancer cell growth. Among twelve compounds obtained, only isosteviol (compound 3) potently inhibited both mammalian DNA polymerases (pols) and human DNA topoisomerase II (topo II), and IC50 value for pol alpha was 64.0 microM. This compound had no inhibitory effect on higher plant (cauliflower) pols, prokaryotic pols, human topo I, and DNA metabolic enzymes such as human telomerase, T7 RNA polymerase, and bovine deoxyribonuclease I. With pol alpha, isosteviol acted non-competitively with the DNA template-primer and nucleotide substrate. Isosteviol prevented the growth of human cancer cells, with LD50 values of 84-167 microM, and 500 microg of the compound caused a marked reduction in TPA (12-O-tetradecanoylphorbol-13-acetate)-induced inflammation (inhibitory effect, 53.0%). The relationship between the structure of stevioside-based compounds and these activities were discussed.

Animals↗
PubMed2005

Structural analysis of catechin derivatives as mammalian DNA polymerase inhibitors.

The inhibitory activities against DNA polymerases (pols) of catechin derivatives (i.e., flavan-3-ols) such as (+)-catechin, (-)-epicatechin, (-)-gallocatechin, (-)-epigallocatechin, (+)-catechin gallate, (-)-epicatechin gallate, (-)-gallocatechin gallate, and (-)-epigallocatechin gallate (EGCg) were investigated. Among the eight catechins, some catechins inhibited mammalian pols, with EGCg being the strongest inhibitor of pol alpha and lambda with IC(50) values of 5.1 and 3.8 microM, respectively. EGCg did not influence the activities of plant (cauliflower) pol alpha and beta or prokaryotic pols, and further had no effect on the activities of DNA metabolic enzymes such as calf terminal deoxynucleotidyl transferase, T7 RNA polymerase, and bovine deoxyribonuclease I. EGCg-induced inhibition of pol alpha and lambda was competitive with respect to the DNA template-primer and non-competitive with respect to the dNTP (2'-deoxyribonucleotide 5'-triphosphate) substrate. Tea catechins also suppressed TPA (12-O-tetradecanoylphorbol-13-acetate)-induced inflammation, and the tendency of the pol inhibitory activity was the same as that of anti-inflammation. EGCg at 250 microg was the strongest suppressor of inflammation (65.6% inhibition) among the compounds tested. The relationship between the structure of tea catechins and the inhibition of mammalian pols and inflammation was discussed.

Animals↗
PubMed2005

Fluorescent imprinted polymers prepared with 2-acrylamidoquinoline as a signaling monomer.

[structure: see text] A cyclobarbital-selective molecularly imprinted polymer was prepared using a fluorescent functional monomer, 2-acrylamidoquinoline. This monomer was designed to increase in fluorescence intensity upon hydrogen bonding to the cyclobarbital guest. The resultant imprinted polymers exhibited the enhancement of the fluorescence intensity when cyclobarbital was bound. Our results show that this fluorescent responsive imprinting method could be useful in the development of sensors for quantification of nonfluorescent compounds.

Acrylamides↗
PubMed2005

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials.

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.

Acrylates↗
PubMed2005

Bisphenol A analog-imprinted polymers prepared by an immobilized template on a modified silica microsphere matrix.

Bisphenol A (BPA)-recognizing imprinted polymers were synthesized using a template immobilized on silica where the template was grafted to aminopropyl silica. The silica-template conjugate was co-polymerized with a cross-linker (ethylene glycol dimethacrylate) and a functional monomer (4-vinylpyridine or methacrylic acid). The synthesized silica-polymer composites were treated with an aqueous NH4HF2 solution to dissolve the silica matrix. The 4-vinylpyridine-based imprinted polymer showed strong binding affinity to BPA and structurally related compounds having two hydroxyl groups at the 4,4'-position in the bisphenol structure.

Benzhydryl Compounds↗
PubMed2004

Atrazine transformation using synthetic enzymes prepared by molecular imprinting.

Atrazine imprinted synthetic polymers were prepared using a combination of methacrylic acid and 2-sulfoethyl methacrylate that bound and converted atrazine and other 6-chlorotriazine herbicides to less toxic compounds. A chloride at the 6-position of the triazines was converted to a methoxy group by the polymer in a methanol-containing solvent, where the imprinting effects enhanced the catalytic activity. Competitive inhibition of the atrazine methanolysis was observed in the presence of a structurally related binder, ametryn, suggesting that the catalytic reaction proceeded in the binding sites generated by the molecular imprinting process.

Atrazine↗
PubMed2004

Taxol derivatives are selective inhibitors of DNA polymerase alpha.

During screening for mammalian DNA polymerase inhibitors, we found and succeeded in isolating a potent inhibitor from a higher plant, Taxus cuspidate. The compound was unexpectedly determined to be taxinine, an intermediate of paclitaxel (taxol) metabolism. Taxinine was found to selectively inhibit DNA polymerase alpha (pol.alpha) and beta (pol.beta). We therefore, tested taxol and other derivatives and found that taxol itself had no such inhibitory effect, and only taxinine could inhibit both pol.alpha and beta. The other compounds used, one derivative, cephalomannine, and five intermediates synthesized chemically inhibited only the pol.alpha activity in vitro. None of the compounds, including taxinine, influenced the activities of the other DNA polymerases, which are reportedly targeted by many pol.beta inhibitors. With both pol.alpha and beta, all of the compounds tested noncompetitively inhibited with respect to both the DNA template-primer and the dNTP substrate.

Animals↗
PubMed2004

Covalent molecular imprinting of bisphenol A using its diesters followed by the reductive cleavage with LiAlH(4).

Bisphenol A (BPA) recognition materials were synthesized by a covalent imprinting technique using BPA-dimethacrylate or BPA-diacrylate as the template monomer. Binding sites in the polymers consisted of two hydroxyl groups that are generated by reducing the ester bonds of the template monomer with lithium aluminum hydride. The polymers strongly adsorbed BPA and structurally related compounds, however, other endocrine disruptors were hardly adsorbed. The BPA-dimethacrylate-based polymer interacted with the samples more strongly than the BPA-diacrylate-based polymer.

Aluminum Compounds↗
PubMed2004

Synthetic polymers adsorbing bisphenol A and its analogues prepared by covalent molecular imprinting using bisphenol A dimethacrylate as a template molecule.

Synthetic polymers which can adsorb bisphenol A (BPA) and related compounds were prepared by a covalent molecular imprinting technique. BPA dimethacrylate, used as template molecule, was polymerized with a crosslinker, triethylene glycol dimethacrylate (TEGDMA) or trimethylol propane trimethacrylate (TRIM). After the polymerization treatment with dilute NaOH was used to cleave BPA from the polymers. For high recovery of BPA with low polymer matrix degradation, the hydrolysis conditions were determined to be treatment with 1.0 mol L(-1) NaOH for 48 h. The binding sites generated by the hydrolysis were evaluated by determination of the retentivity of BPA, BPA analogues, and other endocrine disruptors. The polymers strongly adsorbed compounds with two hydroxyl groups at the 4,4'-positions. Generally the TEGDMA-based polymers had stronger affinity than the TRIM-based polymers, although the TRIM-based polymer adsorbed steroidal hormones with two hydroxyl groups, for example 17 alpha-estradiol and 17 beta-estradiol, more strongly than the TEGDMA-based polymer, meaning that the crosslinkers affected the properties of the binding sites and, depending upon the target molecules, suitable crosslinkers should be chosen in this system.

Adsorption↗
PubMed2004

Traumatic pericardial rupture involved with complication by blunt chest trauma.

A 65-year-old man who had sustained a blunt chest trauma in a traffic accident demonstrated a mass in the left hilum by chest radiography. Emergency surgery demonstrated a rupture of the left-side pericardium with herniation of the heart into the left pleural cavity along with a right ventricular rupture. The tear in the right ventricle was sutured using 4-0 polypropylene with felt and the pericardial rupture was repaired with an expanded polytetrafluoroethylene sheet. A 31-year-old man who had been crushed against a tree while skiing 5 years and 6 months earlier was diagnosed as having severe tricuspid valve regurgitation and tricuspid valve replacement was performed. Large left pericardial defect was found and repaired with an equine pericardial patch. In both cases, a bridging of phrenic nerve was found in the pericardial defect that was regarded as a traumatic rupture.

Accidents, Traffic↗
PubMed2003

Atrazine sensor based on molecularly imprinted polymer-modified gold electrode.

Molecularly imprinted polymers (MIP) have been elucidated to work as artificial receptors. In our present study, a MIP was applied as a molecular recognition element to a chemical sensor. We have constructed an atrazine sensor based on a MIP layer selective for atrazine and its electrochemical reduction on gold electrode. The atrazine sensor was fabricated by directly polymerizing the atrazine-imprinted polymer composed from methacrylic acid and ethylene glycol dimethacrylate onto the surface of a gold electrode. By introducing LiCl into the MIP, atrazine was reduced below -800 mV vs Ag/AgCl reference electrode, at pH 3. The cathodic current of atrazine depended on the concentration of atrazine at the range of 1-10 microM. The sensor exhibited a selective response to atrazine. A nonimprinted polymer-modified electrode did not show selective response to atrazine, thus implying that the imprinted polymer acts as recognition element of atrazine sensor.

Journal Article↗