PubMed Health⌕ Search

Biomedical subjects

Toshiki Sugai

Publications and source records attributed to Toshiki Sugai.

11 recordsLinked to original sources

Enhanced photoluminescence from very thin double-wall carbon nanotubes synthesized by the zeolite-CCVD method.

Photoluminescence (PL) from purified (>90%) double-wall carbon nanotubes (DWNTs), which have been synthesized by zeolite catalyst-supported chemical vapor deposition (zeolite-CCVD), of very small diameters (0.8-nm average inner tube) is reported. The PL contour mappings for various ratios (1-90%) of double- versus single-wall carbon nanotubes by thermal oxidation have enabled us to unambiguously identify the chirality of inner tubes for the DWNTs synthesized. After the extensive high-temperature oxidation at 700 degrees C, high-purity (>90%) DWNTs of approximately 0.8 nm inner diameter are obtained, and most of these correspond to the DWNTs having inner tubes with chiralities of (7,5), (7,6), and (9,4).

Journal Article↗

High-resolution analysis of (Sc3C2)@ C80 metallofullerene by third generation synchrotron radiation X-ray powder diffraction.

The X-ray structure of Sc(3)C(82) is redetermined by the MEM/Rietveld method by using synchrotron radiation powder data at SPring-8, where the C(2) encapsulated structure available to discuss the Sc-Sc interatomic distances has been determined. The encapsulated three scandium atoms form a triangle shape. A spherical charge distribution originating from the C(2) molecule is located at the center of the triangle. Interatomic distances between Sc and Sc are 3.61(3) A in the triangle. The distance between Sc and the center of the C(2) molecule is 2.07(1) A.

Journal Article↗

High-yield synthesis of single-wall carbon nanotubes on MCM41 using catalytic chemical vapor deposition of acetylene.

High-quality single-wall carbon nanotubes (SWNTs) with narrow diameter distribution have been grown on Fe/Co-loaded MCM41 by using acetylene as the carbon source within a short reaction period, typically 10 min or less. The optimum temperature for SWNTs synthesis is 850 degrees C. Longer reaction time (i.e., 30 min) favors the formation of multiwall carbon nanotubes (MWNTs) and graphitic carbon. When the reaction time is reduced to less than 10 min, formation of MWNTs and graphitic carbon is greatly suppressed, and high-quality SWNTs dominates the yield. The surface of the as-grown SWNTs is found to be free from amorphous carbon, as observed from high-resolution transmission electron microscope (HRTEM) analysis. Raman spectral data show a G/D ratio above 10, indicating that the as-grown SWNTs have very few defects. Furthermore, radial breathing mode (RBM) analysis reveals that the diameter distribution of the current SWNTs is narrow and ranges from 0.64 to 1.36 nm.

Journal Article↗

Entrapping of exohedral metallofullerenes in carbon nanotubes: (CsC60)n@SWNT nano-peapods.

Exohedral C60-based metallofullerenes, CsC60, have been synthesized and successfully encapsulated into single-wall carbon nanotubes (SWNTs) in high yield by reducing C60 molecules into anions. High-resolution transmission electron microscopy (HRTEM) images and in situ electron energy loss spectroscopy (EELS) indicate that Cs atoms and C60 molecules align within SWNTs as CsC60 exohedral metallofullerenes, and that the formal charge state of encaged CsC60 is expressed as Cs+1C60-1. The present peapods with the exohedral metallofullerenes provide a new insight and the possibility to fine-tune the electronic and transport properties of carbon nanotubes.

Journal Article↗

Determination of optical isomers for left-handed or right-handed chiral double-wall carbon nanotubes.

The handedness relationship between adjacent layers in nested double-wall carbon nanotubes (DWNTs) has been investigated for the first time. Our high-resolution electron microscopy analysis on a series of specimen tilts can successfully tell the handedness of each constituent nanotube in a DWNT, and therefore the chiral indices (n, m) including their optical isomers [(n, m) or (m, n)] of inner and outer nanotubes can be uniquely determined. It is shown that right-handed and left-handed nanotubes are equally distributed for both the inner and outer nanotubes in the examined specimens and a preferable handedness relationship between the adjacent layers in DWNT may exist.

Journal Article↗

In situ observation of thermal relaxation of interstitial-vacancy pair defects in a graphite gap.

Direct observation of individual defects during formation and annihilation in the interlayer gap of double-wall carbon nanotubes (DWNT) is demonstrated by high-resolution transmission electron microscopy. The interlayer defects that bridge two adjacent graphen layers in DWNT are stable for a macroscopic time at the temperature below 450 K. These defects are assigned to a cluster of one or two interstitial-vacancy pairs (I-V pairs) and often disappear just after their formation at higher temperatures due to an instantaneous recombination of the interstitial atom with vacancy. Systematic observations performed at the elevated temperatures find a threshold for the defect annihilation at 450-500 K, which, indeed, corresponds to the known temperature for the Wigner energy release.

Journal Article↗

Atomic correlation between adjacent graphene layers in double-wall carbon nanotubes.

Atomic correlation between adjacent graphene layers was elucidated for double-wall carbon nanotubes (DWNTs) through a chiral index assignment of two nested nanotubes by high-resolution transmission electron microscopy. Our analysis provides a rather constant diameter difference close to 0.75 nm but no chiral angle correlation between the constituent nanotubes in the concentric DWNTs. The local atomic correlation as a commensurate graphene stacking was repeatedly found in eccentric DWNTs and circumscribed nanotubes, which should lead to elastic deformation and bundling of nanotubes.

Journal Article↗

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica.

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.

Alcohols↗

Hot and solid gallium clusters: too small to melt.

A novel multicollision induced dissociation scheme is employed to determine the energy content for mass-selected gallium cluster ions as a function of their temperature. Measurements were performed for Ga(+)(n) (n=17 39, and 40) over a 90-720 K temperature range. For Ga+39 and Ga+40 a broad maximum in the heat capacity-a signature of a melting transition for a small cluster-occurs at around 550 K. Thus small gallium clusters melt at substantially above the 302.9 K melting point of bulk gallium, in conflict with expectations that they will remain liquid to below 150 K. No melting transition is observed for Ga+17.

Journal Article↗

Structure of a missing-caged metallofullerene: La2@C72.

The La2@C72 metallofullerene having the so-called "missing" C72 fullerene cage was structurally elucidated by using 13C NMR and 139La NMR spectroscopy. The obtained structure of La2@C72 does not satisfy fullerene's structural golden rule, that is, the isolated-pentagon rule. The structure is consistent with a non-IPR D2-C72 (#10611) cage structure where each La atom is situated close to one of the two-fused pentagons.

Journal Article↗